Manyèl Itilizatè Danfoss VLT 5000 pou Kondwi Vitès Varyab VLT5001PT5B20STR3DLF00A00C0

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of the Danfoss VLT 5000 Variable Speed Drive, model VLT5001PT5B20STR3DLF00A00C0. It covers installation, operation, maintenance, and troubleshooting. Please read this manual thoroughly before installing or operating the device.

2. Enfòmasyon sou Sekirite

WARNING: Risk of electric shock. Only qualified personnel should install, operate, or service this equipment.

• Toujou dekonekte kouran an anvan ou fè nenpòt enstalasyon oswa antretyen.
• Asire bon baz inite a.
• Do not operate the drive with damaged cables or components.
• Obsève tout kòd elektrik lokal ak nasyonal yo.
• The drive contains high voltage even after power disconnection. Wait at least 10 minutes for capacitors to discharge before touching internal components.

3. Pwodwi souview

The Danfoss VLT 5000 is a robust variable speed drive designed for precise motor control in industrial applications. It offers advanced features for energy efficiency and process optimization.

Figi 3.1: Front-bò view of the Danfoss VLT 5000 Variable Speed Drive. This image shows the overall physical appearance of the drive, including the Danfoss logo and the VLT 5000 model designation on the front panel.

Figi 3.2: Devan view of the Danfoss VLT 5000 Variable Speed Drive, highlighting the control panel. The control panel features a display screen and various buttons for navigation and parameter adjustment, including DISPLAY/STATUS, QUICK MENU, MENU, CHANGE DATA, CANCEL, OK, and directional arrows. Below the control panel, terminal blocks for wiring are visible.

3.1 Konpozan kle

• Kontwòl Panel: For monitoring and parameter adjustment.
• Tèminal pouvwa: Pou konekte pouvwa antre ak pwodiksyon motè.
• Tèminal kontwòl: For connecting external control signals.
• Najwa Refwadisman: Located on top for heat dissipation.

4. Enstalasyon

4.1 Montaj

Mount the VLT 5000 drive vertically on a flat, stable surface. Ensure adequate clearance for ventilation around the unit, especially above and below the cooling fins.

Figi 4.1: Top view of the Danfoss VLT 5000 Variable Speed Drive, showing the mounting brackets and the product identification label. The label provides critical specifications such as model number (VLT5001PT5B20STR3DLF00A00C0), serial number, input/output voltage, current, and frequency ratings.

4.2 fil elektrik

CAUTION: All wiring must be performed by a qualified electrician in accordance with local and national electrical codes.

1. Antre pouvwa: Connect the three-phase AC power supply to terminals L1, L2, L3.
2. Sòti motè: Connect the motor to terminals U, V, W.
3. Atè: Ensure the drive and motor are properly grounded to the PE terminal.
4. Fil elektrik kontwòl: Connect control signals (e.g., start/stop, speed reference) to the appropriate control terminals as per your application requirements. Refer to the detailed wiring diagram in the full technical manual for specific connections.

Figi 4.2: Anba view of the Danfoss VLT 5000 Variable Speed Drive, showing the power and control wiring terminals. Clearly visible are the input power terminals (L1, L2, L3), motor output terminals (U, V, W), and auxiliary relay terminals (01, 02, 03), along with grounding points.

5. Opere

5.1 Premye pouvwa-up

After completing all wiring and safety checks, apply power to the drive. The control panel display should illuminate.

5.2 Basic Control Panel Functions

• DISPLAY/STATUS: View current operating parameters and status.
• MENI RAPID: Access frequently used parameters.
• MENI: Access the full parameter menu for detailed configuration.
• CHANGE DATA: Modify parameter values.
• OK: Confirm selections or parameter changes.
• ANILE: Exit a menu or cancel an operation.
• Directional Arrows (Up/Down/Left/Right): Navige nan meni yo epi ajiste valè yo.
• KÒMANSE: Initiate motor operation.
• ARETE/REINISYALIZE: Stop motor operation or reset faults.

5.3 Starting and Stopping the Motor

1. Asire ke tout prekosyon sekirite yo obsève.
2. Peze a KÒMANSE button on the control panel. The motor should begin to accelerate to the set reference speed.
3. To stop the motor, press the SISPANN / Reyajiste bouton. Motè a ap ralanti epi li ap rete.

6. Antretyen

WARNING: Disconnect all power before performing any maintenance.

6.1 Verifikasyon woutin

• Enspeksyon vizyèl: Regularly inspect the drive for any signs of damage, loose connections, or overheating.
• Netwayaj: Keep the drive clean and free from dust and debris. Use a soft, dry cloth. Do not use liquid cleaners.
• Operasyon Fan: Ensure cooling fans are operating correctly and are not obstructed.
• Sere Tèminal: Periodically check the tightness of all electrical connections.

NAN. Depanaj

This section provides solutions for common issues. For complex problems, contact Danfoss technical support.

8. Espesifikasyon

Key technical specifications for the Danfoss VLT 5000 Variable Speed Drive (Model: VLT5001PT5B20STR3DLF00A00C0):

• Nimewo Modèl: VLT5001PT5B20STR3DLF00A00C0
• Antre Voltage: 3x380-500V, 50/60Hz
• Antre aktyèl: 2.3A (380V), 1.9A (500V)
• Sòti Voltage: 3x0-Uin, 0-1000Hz
• Sòti aktyèl: 2.2A (0-1000Hz)
• Sòti pouvwa: 1.7kVA
• Chassis/IP Rating: IP20
• Tanperati anbyen: Max. 45°C / 113°F
• Dimansyon pake: 18 x 18 x 12 pous
• Manifakti: Danfoss VLT 5000
• ASIN: B07P6F4QBM

Figi 8.1: Close-up of the product label, detailing the model number, serial number, input/output electrical specifications, and environmental ratings (Chassis/IP20, Max. Ambient Temperature).

9. Garanti ak sipò

For warranty information and technical support, please refer to the official Danfoss website or contact your authorized Danfoss distributor. Keep your purchase receipt and product serial number (found on the product label) for any warranty claims or support inquiries.

Ofisyèl Danfoss Websit: www.danfoss.com