MENABO Delta Roof Bars Fixing Kit User Manual

Entwodiksyon

This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your MENABO Delta Roof Bars Fixing Kit. Designed for vehicles with normal roofs, this kit provides a secure and reliable base for transporting various loads on your vehicle's roof. Please read this manual thoroughly before installation and keep it for future reference.

Enfòmasyon sou Sekirite

Always prioritize safety during installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.

• Limit pwa: Never exceed the maximum load capacity specified for the roof bars or your vehicle's roof. Refer to your vehicle's owner's manual for its specific roof load limit.
• Fixation an sekirite: Ensure all components are securely fastened before driving. Periodically check the tightness of all bolts and connections, especially after the first few kilometers of driving and after driving on rough roads.
• Distribisyon chaj: Distribute the load evenly across the roof bars. Place heavier items at the bottom and center.
• Vitès kondwi: Adjust your driving speed to suit the load and road conditions. High speeds, sudden braking, or sharp turns can affect vehicle stability with a loaded roof rack.
• Clearance: Be aware of increased vehicle height when roof bars are installed, especially when entering garages, car washes, or low-clearance areas.
• Antretyen: Regularly inspect the roof bars for any signs of wear, damage, or corrosion. Replace damaged parts immediately.

Kontni pake

Verify that all components are present and undamaged before beginning installation. The MENABO Delta Roof Bars Fixing Kit includes:

• Roof Bars (2 units)
• Mounting Feet (4 units)
• Rubber Pads/Gaskets (4 units)
• Fikse Clamps/Brackets (4 units)
• Mounting Hardware (bolts, washers, etc.)
• Manyèl Enstriksyon (dokiman sa a)

Enstalasyon ak Enstalasyon

This kit is designed for vehicles with normal roofs. Ensure your vehicle is listed as compatible in the product description or consult the manufacturer's compatibility guide.

Zouti obligatwa:

• Appropriate wrench or Allen key (often included or standard sizes)
• Measuring tape (optional, for precise positioning)

Etap enstalasyon:

1. Prepare machin nan: Ensure your vehicle's roof is clean and dry where the roof bars will be mounted.
2. Assemble Mounting Feet: Attach the rubber pads to the base of each mounting foot. These pads protect your vehicle's paintwork and provide grip.
3. Attach Feet to Bars: Slide the mounting feet into the channels of the roof bars. Do not tighten them fully yet. Ensure the feet are oriented correctly according to the instructions or markings.
4. Position Bars on Roof: Carefully place the assembled roof bars onto your vehicle's roof. Position them according to your vehicle's specific mounting points or recommended distances (refer to your vehicle's manual or the kit's specific instructions for exact measurements). The front bar is typically positioned above the front doors, and the rear bar above the rear doors.
5. Tache Clamps: Attach the fixing clamps/brackets to the mounting feet. These clamps will hook under the door frame or designated mounting points on your vehicle's roof.
6. Sere boulon Fastener: Systematically tighten all bolts on the mounting feet and clamps. Tighten them evenly, alternating between sides, to ensure a balanced and secure fit. Do not overtighten, as this can damage the components or your vehicle. Ensure the roof bars are level and firmly attached.
7. Tcheke final la: After tightening, gently pull and push on the roof bars to confirm they are securely fixed and do not wobble. Drive a short distance (e.g., 5-10 km) and then re-check all fasteners for tightness.

Opere

Once installed, your MENABO Delta Roof Bars are ready for use. Always adhere to the maximum load capacity of the roof bars and your vehicle.

• Chaje: Place cargo evenly on the roof bars. Use appropriate tie-downs, straps, or cargo carriers to secure your load. Ensure no part of the load obstructs your view oubyen entèfere ak fonksyònman machin nan.
• Aerodinamik: Large or irregularly shaped loads can significantly affect vehicle aerodynamics and fuel consumption. Consider using aerodynamic accessories if available.
• bri: Some wind noise may be experienced, especially at higher speeds. This is normal.

Antretyen

Regular maintenance will prolong the life of your roof bars and ensure continued safe operation.

• Netwayaj: Clean the roof bars regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish or rubber components.
• Enspeksyon: Periodically inspect all components for signs of wear, cracks, corrosion, or damage. Pay close attention to the mounting feet, clamps, and the integrity of the bars themselves.
• Tcheke Fastener: Re-check the tightness of all mounting bolts and fasteners at least once a month, or more frequently if you regularly carry heavy loads or drive on rough terrain.
• Depo: Si w ap retire ba twati yo pou yon bon bout tan, sere yo nan yon kote ki pwòp epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.

Depanaj

If you encounter issues with your MENABO Delta Roof Bars, refer to the following common problems and solutions:

Espesifikasyon

Garanti ak sipò

MENABO products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MENABO websit.

For technical support, replacement parts, or any inquiries regarding your MENABO Delta Roof Bars Fixing Kit, please contact your retailer or the MENABO customer service department. Have your product model number (000098100000) and purchase details ready when contacting support.