Entwodiksyon
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
Ki sa ki nan bwat la
- Polk Audio PSW10 10-Inch Powered Subwoofer
- Pouvwa kab
- Manyèl itilizatè
- Policy Documentation
Karakteristik kle
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Amplifier: Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- Koneksyon versatile: Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
Figi 1: Devan view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
Enstalasyon
1. Plasman
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. Koneksyon
The PSW10 offers flexible connection options:
- Line-Level Input (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- Speaker-Level Inputs/Outputs: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
Enstriksyon Operasyon
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- Kontwòl Volim: Ajiste nivo pwodiksyon jeneral subwoofer la. Kòmanse ak yon reglaj ki ba epi ogmante piti piti jiskaske bas la melanje san pwoblèm ak oratè prensipal ou yo.
- Filtre ki pase ba: This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
- Phase Toggle Switch (0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- oto: The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- Sou: The subwoofer remains continuously powered on.
- Off: Subwoofer a etenn.
Antretyen
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- Netwayaj: Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Plasman: Kenbe subwoofer la lwen limyè solèy dirèk, sous chalè ak imidite twòp. Asire w ke gen ase vantilasyon toutotou a. amppanèl lifter pou anpeche surchof.
- Pouvwa: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.
Depanaj
| Pwoblèm | Solisyon posib |
|---|---|
| Pa gen son ki soti nan subwoofer la | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| Bas fèb oswa defòme | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| Subwoofer a ap ronronnen | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| Subwoofer la pa limen otomatikman | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non modèl | PSW10 |
| Kalite Oratè | Subwoofer |
| Subwoofer Dyamèt | 10 pous |
| Amplifier Pouvwa kontinyèl | 50 Watts |
| Amplifier Dynamic Power | 100 Watts |
| Low-Pass Crossover Frequency | 80-160 Hz |
| Antre Voltage | 120 Vòlt (AC) |
| Pwodwi Dimansyon (WxHxD) | 14" x 14.38" x 16.12" |
| Pwa atik | 26 liv |
| Koneksyon Teknoloji | Wired (Auxiliary) |
| Koulè | Nwa |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
Garanti ak sipò
Your Polk Audio PSW10 Powered Subwoofer comes with a Garanti limite. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.