Antec Dark Avenger DA601 E-ATX Mid Tower Case User Manual

1. Entwodiksyon

1.1 About Your Antec DA601 Case

The Antec Dark Avenger DA601 is an E-ATX mid-tower PC case designed for high-performance gaming systems. It features an ARGB front panel with integrated LED strips, a tempered glass side panel for showcasing internal components, and includes a Prizm 120 ARGB fan for enhanced cooling and aesthetics. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DA601 case, ensuring optimal performance and longevity.

2. Pwodwi souview

2.1 Karakteristik kle

• ARGB Front Panel: Features 4 LED strips on the front panel, easily controlled by a single button or motherboard synchronization.
• Pre-Installed ARGB Fan: Includes one Prizm 120 ARGB fan for improved thermal performance and customizable lighting.
• Ekran konplè View: A crystal-clear tempered glass side panel allows for a complete view of your internal PC components.
• High Water-Cooling Capability: Ki fèt ak ample space to support both All-In-One (AIO) and custom liquid cooling configurations.
• Inbuilt LED Controller: Connects to a 3-pin header on the motherboard for 16.8 million custom color options and synchronization.

2.2 Component Layout and Compatibility

Familiarize yourself with the internal layout and component compatibility of the Antec DA601 case before beginning assembly.

Figi 2.1: Devan-gòch view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, showcasing the ARGB front panel and tempered glass side panel.

Figi 2.2: Devan anwo view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, highlighting the top ventilation and front panel I/O ports.

Figure 2.3: Diagram illustrating the internal component layout and compatibility of the Antec DA601 case, including motherboard, GPU, CPU cooler, PSU, and storage drive locations.

3. Enstriksyon Enstalasyon

Follow these steps to assemble your PC components within the Antec DA601 case.

3.1 Prepare Ka a

1. Mete bwat la sou yon sifas ki plat e ki estab.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, protected surface.
3. Remove the opposite metal side panel to access the cable management area.

3.2 Enstalasyon mèr

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX, ATX, Micro-ATX, ITX).
2. Mete pwoteksyon E/S la nan ouvèti dèyè bwat la.
3. Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.

3.3 Enstalasyon Power Supply Unit (PSU).

1. Mount your PSU into the designated bay at the bottom rear of the case.
2. Fikse PSU a ak vis nan dèyè bwat la.

3.4 Enstalasyon Disk Depo

• SSD 2.5 pous: Mount SSDs onto the dedicated SSD trays located behind the motherboard tray. Secure them with screws.
• Disk Difisil 3.5 pous: Install HDDs into the removable drive cages located in the PSU shroud area. Slide them into place and secure with screws or tool-less mechanisms if available.

3.5 Enstalasyon Kat Grafik ak Kat Ekspansyon

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Mete kat grafik ou a oswa lòt kat ekspansyon yo nan fant PCIe ki apwopriye yo sou kat manman ou an.
3. Sere kat yo ak vis.

3.6 Jesyon kab

Utilize the cable routing grommets and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.

3.7 Konekte Antre/Sòti Panèl Devan an

Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED, ARGB headers) to their corresponding pins on your motherboard. Refer to your motherboard manual for exact pin locations.

4. Operasyon Enstriksyon

4.1 Limen

After all components are installed and cables are connected, ensure the PSU switch is in the 'ON' position. Press the power button on the top panel of the case to start your system.

4.2 Kontwòl ekleraj ARGB

The Antec DA601 features addressable RGB (ARGB) lighting on the front panel and includes an ARGB fan. You can control these lights in two ways:

• Bouton Panèl devan: Press the dedicated LED control button on the top panel of the case to cycle through various lighting modes and colors.
• Senkronizasyon kat manman: If your motherboard supports ARGB (5V 3-pin header), connect the case's ARGB cable to the motherboard. You can then control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. Antretyen

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC components.

5.1 Netwayaj

• Filtè Pousyè: Periodically remove and clean the magnetic dust filters located on the top, front, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
• Enteryè: With the system powered off and unplugged, use compressed air to gently remove dust from internal components such as fans, heatsinks, and circuit boards.
• Eksteryè: Siye sifas eksteryè yo ak yon mou, damp twal. Evite pwodui netwayaj abrazif oswa solvan.

5.2 Airflow Optimization

Ensure that the case's ventilation areas are not obstructed. Proper cable management contributes to better airflow, preventing heat buildup inside the case.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

6.1 Pa gen pouvwa

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Check that the front panel power switch cable is correctly connected to the motherboard's power header.

6.2 Fans Not Spinning

• Confirm that all fan power cables are securely connected to the motherboard or a fan controller.
• Check BIOS/UEFI settings to ensure fan control is enabled and configured correctly.

6.3 ARGB Lights Not Working

• Ensure the ARGB cables from the front panel and fan are correctly connected to the case's inbuilt LED controller or directly to a 5V 3-pin ARGB header on your motherboard.
• If using motherboard sync, verify that your motherboard's RGB software is installed and configured correctly.
• Try cycling through modes using the front panel LED button to rule out software issues.

6.4 Overheating Issues

• Asire w ke tout fanatik bwat yo ap vire epi yo oryante kòrèkteman pou yon sikilasyon lè optimal (admisyon/echapman).
• Netwaye filtè pousyè yo ak konpozan entèn yo jan sa dekri nan seksyon Antretyen an.
• Verify that CPU cooler and GPU fans are functioning properly.

7. Espesifikasyon

8. Enfòmasyon sou Garanti

Antec provides a limited warranty for the Dark Avenger DA601 E-ATX Mid Tower Case. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and the claims process, please visit the official Antec website or contact your local Antec distributor.

9. Sipò

Should you require technical assistance, have questions about your product, or need customer service, please utilize the following resources:

• Antec ofisyèl la Websit: Vizite www.antec.com pou enfòmasyon sou pwodwi a, FAQ, ak detay pou kontakte sipò.
• Sèvis Kliyan: Refer to the 'Contact Us' section on the Antec website for regional customer support phone numbers or email addresses.