Manyèl Itilizatè Sonèt Pòt Uni-Com 66149 Debaz ki branche

Entwodiksyon

Mèsi pou acha aasing the Uni-Com 66149 Basic Plug-in Door Chime. This manual provides essential information for the safe and efficient operation of your new door chime. Please read these instructions carefully before installation and retain them for future reference.

Pwodwi souview

The Uni-Com 66149 is a basic, reliable plug-in door chime system designed for ease of use and installation. It consists of a wireless bell push and a mains-powered chime unit.

Figure 1: Uni-Com 66149 Basic Plug-in Door Chime in its packaging. The image displays the white bell push on the left and the white plug-in chime unit on the right, with product features like "mains powered", "wireless", "100m operating range", "32 chimes", and "95db(A) volume" visible on the packaging.

Karakteristik kle:

• Water Resistant Bell Push: IP44 klase pou itilizasyon deyò.
• Plug-in Chime Unit: Connects directly to a standard 13A mains socket.
• Operasyon san fil: Operating range of up to 100 meters (open air).
• Volim reglabl: Sound output of 95dB with volume control.
• Plizyè klòch: Features 32 selectable chime melodies.

Enstalasyon ak Enstalasyon

Kontni pake:

• 1 x Uni-Com 66149 Plug-in Chime Unit
• 1 x Wireless Bell Push (with pre-installed Alkaline battery)
• Fixings for Bell Push (screws and adhesive pad)

Installing the Bell Push:

1. Chwazi yon kote: Select a suitable outdoor location near your door, ensuring it is within the 100m operating range of where you intend to plug in the chime unit.
2. Opsyon Montaj:
   • Adhesive Pad: For smooth, clean surfaces, peel off the backing from the adhesive pad and firmly press the bell push onto the desired location.
   • Vis: For a more secure fitting, use the provided screws. Mark the desired screw holes, drill pilot holes if necessary, and secure the bell push.
3. Batri: The bell push comes with a pre-installed alkaline battery. No action is required for initial setup.

Setting up the Chime Unit:

1. Ploge nan: Insert the chime unit into a standard 13A mains electrical socket indoors. Ensure the socket is easily accessible.
2. Koneksyon (si sa nesesè): The bell push and chime unit are typically pre-paired from the factory. If they do not connect automatically, refer to the "Troubleshooting" section for pairing instructions.

Enstriksyon Operasyon

Chanje Melodi Chime a:

The chime unit features 32 selectable melodies. To change the melody:

1. Locate the melody selection button on the side or front of the chime unit.
2. Press the button repeatedly to cycle through the available melodies.
3. Stop pressing when you hear your desired melody. The chime unit will remember this selection.

Ajiste volim nan:

The chime unit has a volume control to adjust the sound output up to 95dB.

1. Locate the volume control button or dial on the chime unit.
2. Press the button or turn the dial to increase or decrease the volume to your preference.

Tès sistèm nan:

Once installed, press the bell push to confirm that the chime unit sounds. Ensure the chime unit is plugged in and powered on.

Antretyen

Netwayaj:

Wipe the chime unit and bell push with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the chime unit is unplugged before cleaning.

Battery Replacement (Bell Push):

The bell push is powered by an alkaline battery. If the bell push stops working or its range decreases significantly, the battery may need replacement.

1. Carefully open the bell push casing (refer to the diagram in the original packaging if available, or gently pry open with a small screwdriver).
2. Remove the old battery and dispose of it responsibly.
3. Insert a new alkaline battery of the same type, ensuring correct polarity (+/-).
4. Close the bell push casing byen fèm.
5. Test the system to ensure functionality.

Depanaj

Espesifikasyon

Garanti ak sipò

This product is manufactured by Decco. For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official Uni-Com websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

EU Spare Part Availability Duration: 1 Year.