ECCO ED0016R Directional LED Magnetic Mount Light User Manual

1. Entwodiksyon

1.1 Pwodwi souview

The ECCO ED0016R is a directional LED light designed for various warning and safety applications. It features 18 red LEDs, a magnetic mounting base for easy attachment to ferrous surfaces, and is powered by four AA batteries. Its compact and durable design makes it suitable for temporary or portable use.

Image of the ECCO ED0016R Directional LED Magnetic Mount Light, showcasing its red LEDs and magnetic base.

1.2 Itilizasyon entansyonèl

This device is intended for use as a temporary warning or directional light in industrial, commercial, or personal safety environments. It is designed to provide high visibility to alert others to potential hazards or direct traffic flow. It is not intended for permanent installation or as a primary safety device without additional safety measures.

1.3 Kontni pake a

• 1 x ECCO ED0016R Directional LED Magnetic Mount Light

Nòt: Li bezwen 4 pil AA pou fonksyone epi yo pa enkli nan pake a.

2. Enfòmasyon enpòtan sou sekirite

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in injury or damage to the product.

• Kenbe aparèy la lwen timoun yo.
• Pa demonte, modifye, oswa eseye repare aparèy la. Sa ap anile garanti a epi li ka lakòz domaj oswa blesi.
• Ensure the magnetic mount is securely attached to a clean, flat, ferrous surface before operation. Verify stability to prevent the light from falling.
• Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk pou yon peryòd tan pwolonje, oswa imidite twòp.
• Use only the specified battery type (AA).
• Insert batteries with correct polarity (+/-) as indicated inside the battery compartment.
• Pa melanje ansyen ak nouvo pil, oswa diferan kalite pil.
• Remove depleted batteries promptly to prevent leakage and damage.
• Jete pil yo selon règleman lokal yo.

2.1 Avètisman Pwopozisyon 65 Kalifòni

AVÈTISMAN: Pwodui sa a ka ekspoze ou ak pwodui chimik Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.

3. Enstalasyon

3.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman batri a sou aparèy la.
2. Open the cover by sliding or unscrewing it, as applicable.
3. Insert four (4) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Byen fèmen kouvèti lòj batri a.

3.2 Enstalasyon Limyè a

The ECCO ED0016R features a magnetic base for easy attachment.

1. Ensure the desired mounting surface is clean, dry, and made of a ferrous material (e.g., steel).
2. Place the magnetic base of the light firmly onto the surface.
3. Verify that the light is securely attached and will not dislodge due to vibrations or movement.

4. Operasyon

4.1 Limen/Etenyen

Pou opere limyè a:

• Jwenn bouton pouvwa a sou aparèy la.
• Press the power button once to turn the light ON.
• Press the power button again to turn the light OFF.

5. Antretyen

5.1 Ranplasman batri

When the light dims or ceases to function, it is time to replace the batteries. Follow the steps outlined in Section 3.1 Battery Installation to replace the four AA batteries.

5.2 Netwayaj

Pou netwaye aparèy la:

• Ensure the device is turned off and batteries are removed if performing a thorough cleaning.
• Siye sifas eksteryè yo ak yon mou, damp twal.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• Ensure the device is completely dry before reinstalling batteries or operating.

NAN. Depanaj

If you encounter issues with your ECCO ED0016R light, refer to the following troubleshooting guide:

• Limyè pa limen:
  • Check if batteries are installed correctly with the proper polarity.
  • Ensure batteries are not depleted. Replace with new AA batteries if necessary.
  • Asire w kouvèti konpatiman batri a byen fèmen.
• Limyè a fèb oswa li tranble:
  • Batteries may be low. Replace all four AA batteries with new ones.
• Light does not stay mounted:
  • Ensure the mounting surface is clean, dry, and free of debris.
  • Verify the surface is made of a ferrous material suitable for magnetic attachment.
  • The surface may be too thin or have insufficient ferrous content. Try a different mounting location.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information, technical support, or service inquiries regarding your ECCO ED0016R Directional LED Magnetic Mount Light, please contact ECCO customer service directly. Refer to the official ECCO websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.

Please have your model number (ED0016R) and purchase details available when contacting support.