iTek Pilot Z27 Lite PC Case User Manual

1. Entwodiksyon

Thank you for choosing the iTek Pilot Z27 Lite PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before proceeding with assembly to ensure optimal performance and safety.

The iTek Pilot Z27 Lite is a compact 27-liter mid-tower case designed for both home and business applications, offering efficiency, versatility, and quality construction. It comes equipped with a silent 500W power supply and features convenient front panel connectivity.

2. Enfòmasyon sou Sekirite

Tanpri obsève prekosyon sekirite sa yo pandan enstalasyon ak operasyon:

• Toujou dekonekte ekipman pou kouran an nan priz miray la anvan ou enstale oswa retire nenpòt konpozan.
• Avoid exposing the case to moisture, dust, or extreme temperatures.
• Handle internal components with care to prevent damage from static electricity. Use an anti-static wrist strap if available.
• Ensure proper ventilation around the case to prevent overheating.
• Do not attempt to open the power supply unit, as it contains high voltage konpozan.
• Kenbe ti pati ak zouti lwen timoun yo.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• iTek Pilot Z27 Lite PC Case
• Pre-installed 500W Power Supply Unit (PSU)
• Pre-installed 80mm Rear Fan
• Accessory kit (screws, standoffs, cable ties)
• Manyèl Itilizatè (dokiman sa a)

4. Pwodwi souview

Familiarize yourself with the external features and connectivity options of your iTek Pilot Z27 Lite PC case.

Figi 4.1: Devan angilè view of the iTek Pilot Z27 Lite PC Case. This image shows the overall compact design and the front panel layout.

Figi 4.2: Devan view highlighting the top-mounted I/O ports. From left to right: USB 3.0, USB 2.0, Headphone jack, Microphone jack, USB Type-C Gen2, Power button, Reset button (small square).

Pò Antre/Sòti sou Panèl Devan an:

• USB 3.0 pò: Pou transfè done gwo vitès.
• USB 2.0 pò: Pou aparèy USB estanda yo.
• USB Type-C Gen2 Port: Modern reversible connector for fast data and power delivery.
• Jack odyo HD: Separate ports for headphones and microphone.
• Bouton pouvwa: Pou limen/etenn sistèm nan.
• Bouton Reyajiste: Pou rekòmanse sistèm lan.

5. Enstalasyon ak Enstalasyon

Follow these steps to install your components into the iTek Pilot Z27 Lite PC case.

5.1 Prepare Ka a

1. Mete bwat la sou yon sifas plat epi ki estab.
2. Remove the side panel(s) by unscrewing the thumbscrews at the rear of the case and sliding the panel backward.

Figi 5.1: Angle view of the case, showing the side panel which can be removed for component installation.

5.2 Enstalasyon mèr

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case.
3. Secure the motherboard with the appropriate screws from the accessory kit.

5.3 Enstalasyon Disk Depo

The case supports various storage configurations. Refer to the internal layout for specific drive bay locations.

1. Install 3.5-inch HDDs into the designated drive cages.
2. Install 2.5-inch SSDs onto the dedicated mounting points.
3. Secure all drives with screws.

5.4 Expansion Card Installation (PCI Slots)

The case provides 7 PCI slots for expansion cards.

1. Remove the necessary PCI slot covers from the rear of the case.
2. Mete kat grafik ou a oswa lòt kat ekspansyon yo nan fant PCI-E kat manman an.
3. Sere kat yo ak vis.

Figi 5.2: Enteryè dèyè view of the case, showing the motherboard tray, rear fan mount, and PCI expansion slots.

5.5 Jesyon kab

Utilize the cable routing options behind the motherboard tray to ensure clean cable management and improved airflow.

1. Connect all power cables from the pre-installed 500W PSU to your components (motherboard, CPU, GPU, drives).
2. Connect front panel I/O cables (USB 3.0, USB 2.0, USB Type-C, HD Audio, Power, Reset) to the corresponding headers on your motherboard.
3. Route cables neatly using the provided cable ties.

6. Operasyon Enstriksyon

Once all components are installed and connected:

1. Ensure all side panels are securely re-attached.
2. Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports.
3. Connect the power cable from the case's power supply to a wall outlet.
4. Press the power button on the front panel to turn on your system.

The iTek Pilot Z27 Lite can be used in both vertical and horizontal orientations, depending on your desk setup and preference.

7. Antretyen

Regular maintenance helps prolong the life of your PC and ensures optimal performance.

• Netwayaj pousyè: Periodically clean dust from the case interior and fan filters using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
• Netwayaj eksteryè: Siye sifas eksteryè yo ak yon mou, damp twal. Evite pwodui chimik ki agresif oswa materyèl abrazif.
• Tcheke kab: Occasionally check internal cables to ensure they are securely connected and not obstructing airflow.

NAN. Depanaj

Si ou rankontre pwoblèm, gade etap depanaj komen sa yo:

9. Espesifikasyon

10. Garanti ak sipò

The iTek Pilot Z27 Lite PC Case comes with a Garanti manifakti 24 mwa.

For technical support, warranty claims, or further assistance, please contact your retailer or visit the official iTek websit la. Kenbe prèv acha ou a pou validasyon garanti a.

For more information about iTek products, you can visit their official store: iTek Official Store.