1. Entwodiksyon
Mèsi pou acha aasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.
This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.
2. Enfòmasyon sou Sekirite
Please observe the following safety precautions to prevent electric shock, fire, or damage to the unit:
- Sous pouvwa: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage kòrèk pou rejyon ou an.
- Vantilasyon: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
- Dlo ak imidite: Pa ekspoze aparèy la anba lapli, imidite, degoute, oswa eklatman. Pa mete objè ki plen likid, tankou vaz, sou aparèy la.
- Chalè: Pa mete aparèy la toupre sous chalè tankou radyatè, recho, recho, oswa lòt aparèy (ki gen ladan amplifiers) ki pwodui chalè.
- Objè etranje: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
- Sèvis: Pa eseye fè sèvis pwodui sa a tèt ou. Refere tout sèvis yo bay pèsonèl sèvis kalifye.
- Netwayaj: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth only. Do not use liquid or aerosol cleaners.
3. Pake kontni
Carefully unpack the unit. The carton should contain:
- Audiolab M-ONE Integrated Amplifier
- AC pouvwa kab
- Kontwòl Remote
- USB kab
- Manyèl Itilizatè (dokiman sa a)
Si nenpòt atik ki manke oswa ki domaje, tanpri kontakte konsesyonè ou imedyatman.
4. Pwodwi souview
4.1 Panèl devan
Figi 4.1: Devan view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.
- Sòti ekoutè: Jack 6.3mm pou konekte kas ekoutè.
- SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
- Ekspozisyon OLED: Shows current input, volume level, and menu information.
- Bouton VOL (Volim): Rotates to adjust volume level. Press to mute/unmute.
- Bouton pouvwa: Press to turn the unit on or off (standby mode).
- M-ONE Indicator: Limyè LED ki endike estati pouvwa a.
4.2 Panèl dèyè
Figi 4.2: Dèyè view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).
- Pouvwa switch: Main power ON/OFF switch.
- AC Power Inlet: Connects to the supplied AC power cable.
- Oratè Tèminal: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
- Entran Digital:
- KOAXYAL: Antre koaksiyal dijital.
- OPTIK: Digital optical (Toslink) input.
- USB B: USB Type B input for connecting to a computer.
- Analog Inputs (AUX): RCA stereo inputs for analog sources.
- Deklanche 12V: For synchronized power control with other compatible components.
5. Enstalasyon
5.1 Plasman
Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.
5.2 Koneksyon oratè
Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.
Atansyon:
- Ensure the M-ONE is powered off before making any speaker connections.
- Do not short-circuit the speaker terminals.
5.3 Koneksyon Sous
Connect your audio sources to the appropriate inputs on the rear panel:
- Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
- Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.
5.4 Koneksyon pouvwa
Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.
6. Operasyon Enstriksyon
6.1 Power On/Off
First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.
6.2 Seleksyon Antre
Vire a SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL bouton pou konfime seleksyon ou a.
6.3 Kontwòl Volim
Vire a VOL knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the VOL knob to mute or unmute the audio output.
6.4 Bluetooth Pairing
Pou konekte yon aparèy Bluetooth:
- Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
- Sou aparèy mobil ou a (telefòn entelijan, tablèt, elatriye), aktive Bluetooth epi chèche aparèy ki disponib yo.
- Select "Audiolab M-ONE" from the list of devices.
- Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.
6.5 DAC Functionality
The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.
6.6 Sòti ekoutè
Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.
6.7 Navigasyon meni ak paramèt
The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the VOL knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:
- Filtè dijital: Select different digital filter characteristics for the DAC.
- Ekspozisyon klète: Ajiste klète ekran OLED la.
- Standby Timer: Set a timer for automatic standby.
- Volume on Power On: Configure the initial volume level when the unit powers on.
7. Antretyen
To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:
- Netwayaj: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- Vantilasyon: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
- Koneksyon: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
- Depo: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.
NAN. Depanaj
If you experience issues with your M-ONE, consult the following table before contacting service personnel:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa | Power cable not connected; Rear power switch off; Unit in standby. | Check power cable connection; Ensure rear power switch is ON; Press front panel power button. |
| Pa gen son ki soti nan moun kap pale | Incorrect input selected; Volume too low; Speakers not connected; Mute activated; Headphones connected. | Select correct input; Increase volume; Check speaker connections; Press VOL knob to unmute; Disconnect headphones. |
| Pa gen son soti nan kas ekoutè | Headphones not fully inserted; Volume too low; Mute activated. | Ensure headphones are fully inserted; Increase volume; Press VOL knob to unmute. |
| Bluetooth pa asosye | M-ONE not in pairing mode; Device too far; Interference. | Select BT input; Ensure M-ONE is discoverable; Move device closer; Reduce interference. |
| Son defòme | Source signal too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Check speaker impedance compatibility; Inspect and replace cables if necessary. |
9. Espesifikasyon
The following specifications are typical for the Audiolab M-ONE:
- Sòti pouvwa: 80 watts per channel (into 8 ohms)
- Entran Digital: Coaxial, Optical, USB Type B
- Entran analog: RCA (AUX)
- Koneksyon Wireless: Bluetooth
- DAC: DSD compatible
- Dimansyon (L x W x H): 13.7 x 11.5 x 4.4 pous (34.8 x 29.2 x 11.2 cm)
- Pwa: 16.58 liv (7.52 kg)
- Voltage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
- Manifakti: Audiolab
- Nimewo Modèl: M-ONE
Remak: Espesifikasyon yo ka chanje san avètisman.
10. Garanti ak sipò
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab websit pou enfòmasyon kontak.
Websit: www.audiolab.co.uk
