Manyèl Itilizatè Bwat Jwèt PC Aerocool Bolt Mid-Tower RGB

Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool Bolt Mid-Tower RGB PC Gaming Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper usage and to maximize the lifespan of your product.

Figi 1: Devan-gòch view of the Aerocool Bolt Mid-Tower RGB PC Gaming Case, showcasing the full acrylic side panel and the RGB LED strip on the front panel.

Karakteristik kle

• Mid-Tower ATX form factor.
• Stylish RGB LED strip on the front panel with 13 lighting modes (6 RGB flow, 7 static colors).
• Full acrylic side panel for component visibility.
• Carbon fiber style front panel finish.
• Supports ATX, Micro-ATX, and Mini-ITX motherboards.
• Liquid cooling support up to 240mm.
• Up to six 120mm fans (one 120mm black fan included at the rear).
• Dual chamber design for improved cooling.
• Front I/O panel with USB 3.0 and USB 2.0 ports.

Enstalasyon ak Enstalasyon

Before beginning installation, ensure your workspace is clean and static-free. Refer to your component manuals for specific installation instructions.

1. Prepare Ka a

1. Retire Panno Side: Carefully unscrew the thumbscrews on the rear of the case for both the acrylic side panel and the solid metal side panel. Gently slide the panels backward and lift them off.
2. Bwat akseswar: Locate the accessory box inside the case, which contains screws, cable ties, and other mounting hardware.

Figi 2: Side view of the case, highlighting the full acrylic side panel. This panel provides a clear view nan konpozan entèn yo.

2. Enstalasyon mèr

1. Enstale Standoffs: Ensure the correct standoffs are installed for your motherboard size (ATX, Micro-ATX, or Mini-ITX). The case comes with pre-installed standoffs for ATX. Adjust as necessary.
2. Enstale Pwoteksyon E/S la: Snap your motherboard's I/O shield into the rear opening of the case.
3. Monte Kat Mèb: Mete kat manman ou a avèk anpil atansyon sou distans yo, aliyen twou vis yo. Sere l byen ak vis yo bay yo.

Figi 3: Entèn view of the case, illustrating the motherboard mounting area, cable management cutouts, and drive bays.

3. Enstalasyon Inite Alimantasyon (PSU)

• The PSU mounts at the bottom rear of the case. Slide your PSU into the dedicated compartment from the rear.
• Secure the PSU with screws from the outside of the case.
• Route necessary cables through the cutouts into the main chamber for component connection.

4. Enstalasyon Disk Depo

• Disk Difisil 3.5 pous: Install 3.5" hard drives into the drive cage located beneath the PSU shroud. Slide them in and secure with screws.
• SSD 2.5 pous: Mount 2.5" SSDs to the dedicated mounting points on the motherboard tray or the PSU shroud. Secure with screws.

5. Enstalasyon Kat Grafik (GPU)

• Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
• Mete kat grafik ou a nan plas PCIe ki apwopriye a sou kat manman an.
• Secure the graphics card to the case with screws. The case supports high-end graphics cards up to 355mm in length.

6. Cooling System Installation (Fans & Liquid Cooling)

• Fanatik: The case supports up to six 120mm fans. One 120mm fan is pre-installed at the rear. Additional fans can be installed at the front (up to 3x 120mm), top (up to 2x 120mm), and PSU shroud (2x 120mm for VGA cooling).
• Refwadisman likid: A 240mm radiator can be installed at the front of the case.
• Asire bon direksyon sikilasyon lè a pou yon refwadisman optimal.

Figi 4: Devan anwo view of the case, displaying the power button, USB 3.0, USB 2.0 ports, and audio jacks.

7. Jesyon kab

• Utilize the cable management cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and aesthetics.
• Connect all necessary power and data cables to your components.
• Connect the case's front panel connectors (USB, audio, power switch, reset switch, LED switch) to the appropriate headers on your motherboard.

Enstriksyon Operasyon

RGB LED Lighting Control

The Aerocool Bolt case features an integrated RGB LED strip on the front panel with multiple lighting modes. Control is managed via a dedicated LED control switch located on the top I/O panel.

• Pouvwa sou: After connecting the case's RGB cable to your power supply (usually via a SATA power connector), the RGB strip will illuminate upon system startup.
• Chanje mòd: Press the LED control switch (often labeled "LED" or a lightbulb icon) on the top panel to cycle through the 13 available lighting modes. These include 6 RGB flow effects and 7 static color modes.
• Turn Off/On: Press and hold the LED control switch for a few seconds to turn the RGB lighting off. Press it again briefly to turn it back on.

Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite bwat PC ou a.

• Netwayaj pousyè: Netwaye filtè pousyè yo (si genyen) ak konpozan entèn yo detanzantan avèk lè konprese. Asire w ke sistèm nan etenn epi debranche anvan ou netwaye li.
• Acrylic Side Panel: Clean the acrylic side panel with a soft, lint-free cloth and a mild, non-abrasive cleaner specifically designed for plastics. Avoid harsh chemicals or abrasive materials, as they can scratch the surface.
• Jesyon kab: Tcheke chemen kab yo detanzantan pou asire pa gen okenn kab ki bloke sikilasyon lè a oswa lam vantilatè yo.

Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

• Pa gen pouvwa:
  • Asire w ke PSU a byen konekte ak priz miray la epi ke switch pouvwa ki sou PSU a nan pozisyon "ON".
  • Verify that the case's front panel power switch cable is correctly connected to the motherboard's power header.
• Ekleraj RGB pa travay:
  • Check if the RGB LED strip's power cable (usually SATA) is securely connected to your power supply.
  • Ensure the LED control switch cable from the front panel is connected to the appropriate header on the RGB controller (if applicable) or directly to the LED strip.
  • Try pressing the LED control switch to cycle through modes or holding it down to turn it on/off.
• Move sikilasyon lè/Twòp chalè:
  • Ensure all installed fans are spinning and oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
  • Clean any dust buildup on fans and filters.
  • Verify that cables are neatly managed and not obstructing airflow.
• Pò USB yo pa fonksyone:
  • Check if the USB 3.0 and USB 2.0 cables from the front panel are correctly connected to the corresponding headers on your motherboard.

Espesifikasyon

Enfòmasyon sou Garanti

AeroCool products typically come with a limited manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official AeroCool websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

If you encounter issues not covered in this manual or require further assistance, please contact AeroCool customer support. Contact information can usually be found on the official AeroCool websit la oubyen sou anbalaj pwodwi a.

Websit: www.aerocool.io (Tanpri verifye ofisyèl aktyèl la websit pou sipò.)