EPEVER 60A MPPT Solar Charge Controller User Manual

1. Entwodiksyon

This manual provides instructions for the installation, operation, and maintenance of the EPEVER 60A MPPT Solar Charge Controller (Model 6415AN). This controller is designed for 12V/24V/36V/48V auto-sensing systems, features common negative grounding, and supports a maximum PV input of 150V and 4500W. It is compatible with various battery types, including lead-acid (sealed, gel, flooded) and lithium batteries.

Figure 1: EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) showing front and back views with terminals.

2. Enstriksyon Sekirite

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller or batteries.
• Toujou konekte batri a an premye, answit panèl solè a, epi finalman chaj la. Dekonekte nan lòd envès.
• Enstale kontwolè a nan yon zòn ki byen ayere, lwen materyèl ki ka pran dife ak limyè solèy dirèk.
• Sèvi ak disjonktè oswa fizib ki apwopriye pou tout koneksyon yo pou pwoteje kont surkouran.
• The controller is common negative ground. Ensure proper grounding for safety.

3. Pwodwi souview

The EPEVER Tracer AN series controller utilizes multiphase synchronous rectification technology (MSRT) and an advanced MPPT control algorithm. It features a dual-core processor architecture and common negative design, offering high response speed, reliability, and industrial standard performance.

Figi 2: Detaye view of the EPEVER 60A MPPT Solar Charge Controller with key components labeled, including terminals, buttons, and indicators.

1. fuse: Overcurrent protection for the battery circuit.
2. Tèminal batri yo: Konekte ak bank batri a.
3. Tèminal PV yo: Connects to the solar panel array.
4. Load Control Relay: Output for controlling external loads.
5. RBVS Port: Remote Battery Voltage Sensor port.
6. Utility/Generator Relay ON: Relay for utility or generator control.
7. Utility/Generator Relay OFF: Relay for utility or generator control.
8. RS485 Port (5V/DC/200mA): Communication port for PC or remote meter.
9. RTS Port: Remote Temperature Sensor port.
10. Generator and Load Relay Enable: Terminal for enabling generator and load relays.
11. PV Reverse Polarity Alarm Indicator: LED indicator for incorrect PV polarity.
12. Tèminal baz: For system grounding.
13. Bouton SELECT: Used for navigating menus and changing settings.
14. Chaje ki ap dirije endikatè: Endike estati chaje.
15. Fault LED Indicator: Endike defo sistèm yo.
16. ANTRE bouton: Used for confirming selections and entering menus.

4. Enstalasyon ak Enstalasyon

4.1 Dyagram fil elektrik

Figi 3: Egzample connection diagram illustrating the wiring of the solar charge controller with PV array, battery bank, and load. Consult local and national electrical codes for compliance.

4.2 Etap enstalasyon yo

1. Montaj: Mount the controller vertically on a non-flammable surface in a well-ventilated area, ensuring adequate clearance for heat dissipation.
2. Atè: Connect the grounding terminal to earth ground. The controller features common negative grounding.
3. Koneksyon batri: Connect the battery cables to the battery terminals on the controller. Ensure correct polarity (positive to positive, negative to negative). The PV input voltage must be at least 2V greater than the battery voltage to initiate charging.
4. Koneksyon Anrejistreman PV: Connect the solar panel cables to the PV terminals. Verify correct polarity. The maximum PV open circuit voltage pa ta dwe depase 150V.
5. Koneksyon chaj: Connect the load to the load control relay terminals.
6. Pwodwi pou Telefòn opsyonèl: Connect the Remote Temperature Sensor (RTS) to the RTS Port and the Remote Battery Voltage Sensor (RBVS) to the RBVS Port for accurate temperature compensation and voltage mezi.
7. Pouvwa sou: After all connections are secure and verified, the controller will power on automatically.

5. Operasyon Enstriksyon

5.1 Ekran LCD ak Entèfas

Figure 4: The LCD display shows various system parameters such as PV voltage, chaje aktyèl, batri voltage, load status, and energy statistics. The browse interface illustrates different screens accessible via the SELECT and ENTER buttons.

The LCD provides real-time system information. Use the CHWAZI button to navigate through different display screens and the ANTRE button to confirm selections or enter settings menus.

5.2 Paramèt Kalite Batri

The controller supports various battery types. It is crucial to set the correct battery type for optimal charging and battery longevity. The supported types include:

• Sele (Default)
• Jèl
• Inonde
• Lityòm
• User-defined (for custom parameters)

Access the battery type settings through the controller's menu using the SELECT and ENTER buttons or via the RS485 communication port with appropriate software/remote meter.

5.3 Entèfas kominikasyon

The controller features an RS-485 communication bus interface and supports the Modbus communication protocol. This allows for connection to a PC or a remote meter (e.g., MT50) for advanced monitoring, parameter setting, and data logging.

6. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal kontwolè chaj solè ou a.

• Enspeksyon vizyèl: Periodically check all wiring connections for tightness and corrosion. Ensure no insulation damage.
• Netwayaj: Keep the controller's heat sink and enclosure clean and free from dust or debris to ensure proper heat dissipation. Use a dry cloth for cleaning.
• Vantilasyon: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow.
• Sante batri: Siveye batri voltage and health regularly. Ensure battery terminals are clean and free of corrosion.

NAN. Depanaj

The controller includes a fault LED indicator to signal issues. Refer to the following common troubleshooting steps:

• Pa gen ekspozisyon/Pa gen kouran:
  • Tcheke koneksyon batri yo epi asire w ke yo byen fèm epi yo byen polarize.
  • Verify batri voltage se nan seri a fonksyone.
  • Check the battery fuse.
• No Charging from PV:
  • Check PV array connections and polarity. The PV reverse polarity alarm indicator will light up if polarity is incorrect.
  • Asire PV D' voltage is at least 2V higher than battery voltage.
  • Verify solar panels are receiving adequate sunlight and are not shaded.
• Chaj la pa fonksyone:
  • Tcheke koneksyon chaj yo epi asire w yo byen fèm.
  • Verify load settings in the controller menu.
  • Asire batri voltage is sufficient to power the load.
• Fault LED Indicator On:
  • Consult the detailed fault codes in the complete product manual (not provided here) for specific error identification. Common faults include over-voltage, anba-voltage, twòp tanperati, oswa sikwi kout.

8. Espesifikasyon

Figure 5: Dimensions of the EPEVER 60A MPPT Solar Charge Controller: Length 340mm, Width 236mm, Height 119mm.

Figure 6: Detailed technical specifications for the EPEVER Tracer AN Series, including the 6415AN model.

9. Enfòmasyon sou Garanti

The EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) comes with a manufacturer's warranty for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

10. Sipò

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact EPEVER customer support. Refer to the official EPEVER website for the most up-to-date contact information and additional resources, including detailed manuals and software downloads.