Mesqool Ultra-Clear Digital Alarm Clock

Entwodiksyon

Thank you for choosing the Mesqool Ultra-Clear Digital Alarm Clock. This device combines a large LED display with a unique time projection feature, dual alarms, and a convenient USB charging port, designed to enhance your daily routine. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new alarm clock.

The Mesqool Ultra-Clear Digital Alarm Clock, featuring its large display, time projection, and USB charging capability.

Enstalasyon

1. Debake: Carefully remove all components from the packaging. Ensure you have the alarm clock unit and the AC power adapter.
2. Koneksyon pouvwa:

   Connect the provided AC power adapter to the DC IN port on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will light up.

3. Enstalasyon backup batri:

   For battery backup, open the battery compartment on the bottom of the unit. Insert two (2) AAA batteries (not included), observing the correct polarity (+/-). These batteries will preserve your time and alarm settings during a power outage and can trigger the alarm, but will not power the display.

   

   Insert two AAA batteries into the designated compartment for backup functionality.

4. Anviwònman Tan Inisyal:

   Upon first power-up, the clock may display a default time. Refer to the "Setting Time" section under Operating Instructions to set the current time.

Enstriksyon Operasyon

Setting Time (12/24H Format)

1. Peze epi kenbe la "SET TIME" bouton an jiskaske chif èdtan yo ap flache.
2. Sèvi ak la "HOUR" epi "MINUTE" bouton pou ajiste tan an.
3. Peze "SET TIME" ankò pou konfime epi ale nan pwochen paramèt la.
4. Pou chanje ant fòma 12 èdtan ak 24 èdtan, peze bouton an "12/24 èdtan" button during time setting or normal operation.

Mete Alam Doub

The clock features two independent alarms (ALARM1 and ALARM2).

1. Peze epi kenbe swa "ALARM1" or "ALARM2" bouton an jiskaske chif lè alam lan ap flache.
2. Sèvi ak la "HOUR" epi "MINUTE" bouton yo pou mete lè alam ou vle a.
3. Press the respective alarm button again to confirm.
4. Pou aktive/dezaktive yon alam, peze yon ti kras sou "ALARM1" or "ALARM2" button. An indicator icon will appear/disappear on the display.
5. Ajiste Volim Alam lan: During an active alarm, press the "VOL-" or "VOL+" buttons to adjust the alarm volume. There are multiple levels of volume adjustment.


The alarm volume can be adjusted to your preferred level, from quiet to loud.

Fonksyon Snooze

Lè alam lan sonnen, peze gwo bouton an "SNOOZE/OK" button on top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after the snooze period.

Activate the 9-minute snooze function by pressing the large SNOOZE/OK button.

Time Projection Features

The Mesqool alarm clock can project the time onto your wall or ceiling.

• Ang pwojeksyon: The projector lens can be rotated 180 degrees to adjust the projection angle.
• Ajisteman konsantre: Rotate the focus ring on the projector to achieve a clear and sharp projection image.
• Projection Reversal: If the projected time appears upside down, press the "FLIP" button (or similar, refer to specific button on your model) to reverse the projection 180 degrees.
• Pwojeksyon klète: The projection brightness can be adjusted. Locate the "PROJECTION DIMMER" switch or button on the side of the projector. There are 5 levels of brightness.

Adjust the projection angle, focus, and flip the image for optimal viewing.


Select from 5 levels of projection brightness to suit your environment.



The projection dimmer switch is located on the side of the projector.

Montre gradateur

The main LED display has 5 levels of brightness. Press the "DIMMER" button (or similar, refer to specific button on your model) repeatedly to cycle through the brightness levels, from brightest to off.

The large LED display offers clear visibility and adjustable brightness.

Port chaje USB

A USB charging port is located on the back of the unit. Connect your smartphone or other USB-powered devices to this port for convenient charging. This port is for charging only and does not support data transfer.

Utilize the integrated USB port to conveniently charge your devices.

Tan Ete (DST)

Peze a "DST" button to activate or deactivate Daylight Saving Time. The clock will automatically adjust by one hour forward or backward.

Antretyen

• Netwayaj: Use a soft, dry cloth to clean the surface of the alarm clock. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Ranplasman batri: Replace the AAA backup batteries annually or when the battery indicator (if present) suggests low power. Ensure the clock is powered by the AC adapter when replacing batteries to avoid losing settings.
• Swen Jeneral: Avoid placing the clock in direct sunlight, near heat sources, or in areas with high humidity. Do not expose the unit to water or other liquids.

Depanaj

Espesifikasyon

• Modèl: MS-CR01F
• Kalite ekspozisyon: dirije
• Sous pouvwa: Adaptè AC (enkli)
• Batri Backup: 2 x AAA pil (pa enkli)
• Wattage: 10 wat
• Dimansyon: 20.32 x 3.81 x 9.14 cm (8 x 1.5 x 3.6 pous)
• Pwa: 240 g (0.53 lbs)
• Distans pwojeksyon: Optimal 1.5 - 3 meters (5 - 10 feet)
• Karakteristik espesyal: Time Projection, USB Charging Port, Dual Alarms, Snooze, DST, 12/24H Modes, 5-Level Display Dimmer, Adjustable Alarm Volume.

Garanti ak sipò

Mesqool products are designed and manufactured to the highest quality standards. For any questions, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Mesqool websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

Pou plis enfòmasyon, vizite a Magazen Mesqool sou Amazon.