1. Pwodwi souview
The Comfee MDDE-10DEN3 Dehumidifier is designed to efficiently remove excess moisture from indoor air, creating a more comfortable and healthier environment. It is suitable for rooms up to approximately 40 cubic meters. This unit features a clearly designed control panel for easy operation, a 2-liter water tank, and includes essential protections such as frost and overflow protection. It utilizes R290 refrigerant for effective dehumidification.

Figi 1: Devan view of the Comfee MDDE-10DEN3 Dehumidifier. This image shows the compact design of the unit, with the air intake grille visible on the front and the water level indicator on the side.
2. Enstriksyon Sekirite
Please read all safety instructions carefully before operating the dehumidifier to prevent injury or damage. Keep this manual for future reference.
- Asire ke ekipman pou pouvwa a matche ak voltage espesifye sou etikèt evalyasyon inite a.
- Pa sèvi ak dezimidifikatè a si kòd la oswa ploge a domaje.
- Pa bloke ni antre ni sòti lè a. Kenbe omwen 20 cm (8 pous) espas ozalantou aparèy la.
- Pa sèvi ak aparèy la nan mouye oswa damp environments, such as bathrooms or laundry rooms, where it may come into contact with water.
- Toujou deploge aparèy la anvan ou netwaye oswa fè nenpòt antretyen.
- Keep the unit upright during transport and operation.
- This appliance uses R290 refrigerant, which is flammable. Do not puncture the refrigerant circuit.
- Pa eseye repare oswa modifye aparèy la tèt ou. Kontakte pèsonèl sèvis kalifye pou reparasyon yo.
- Kenbe lwen timoun ak bèt kay.
3. Pwodwi konpozan
Familiarize yourself with the main parts of your Comfee MDDE-10DEN3 Dehumidifier:
- Kontwòl Panel: Located on the top of the unit, used for setting operation modes and humidity levels.
- Griy pou antre lè a: Where air is drawn into the unit for dehumidification.
- Priz lè: Ki kote lè sèk yo ekspilse.
- Tank dlo: Collects condensed water. Features a water level indicator.
- Manch: Pou portabilite fasil.
- Kòd pouvwa: Konekte aparèy la ak yon priz elektrik.

Figi 2: Fèmen view of the Comfee MDDE-10DEN3 Dehumidifier control panel. This image displays the various buttons and indicator lights, including power, humidity settings (40%, 50%, 60%), and defrost indicators.
4. Enstalasyon
- Debake: Retire dezumidifikatè a nan anbalaj li avèk prekosyon. Kenbe anbalaj la pou depo oswa transpò pita.
- Plasman: Place the unit on a firm, level surface in the desired room. Ensure there is at least 20 cm (8 inches) of free space around all sides of the unit for proper air circulation. Do not place it near heat sources or in direct sunlight.
- Koneksyon pouvwa: Branche kòd kouran an nan yon priz elektrik ki gen koneksyon ak tè. Asire w ke priz la satisfè egzijans kouran aparèy la.
- Tank dlo: Asire w ke tank dlo a byen mete nan aparèy la.
5. Operasyon Enstriksyon
The control panel allows you to manage the dehumidifier's functions.

Figi 3: Detaye view of the control panel for operation reference.
- Bouton pouvwa (1): Peze pou limen oswa etenn inite a.
- Bouton pou ajiste imidite a (2): Press to cycle through desired humidity levels: 40%, 50%, 60%. The corresponding indicator light will illuminate. The unit will operate until the set humidity level is reached.
- Operasyon kontinyèl: If no specific humidity level is set, the unit may operate continuously.
- Defrost Indicator (3): Illuminates when the unit is in defrost mode, which occurs automatically when coil temperatures are too low. The dehumidification process will pause during defrosting.
- Full Water Tank Indicator (④): Illuminates when the water tank is full or incorrectly inserted. The unit will stop operating until the tank is emptied and reinserted correctly.
- Fonksyon Rekòmanse Otomatik: Nan ka yon pouvwa outage, the unit will automatically restart with the previously set humidity level once power is restored.
Drenaj kontinyèl (opsyonèl)
For continuous operation without needing to empty the water tank, a drainage hose (not included) can be connected to the continuous drainage port on the back of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle.
6. Antretyen
Antretyen regilye asire pèfòmans optimal epi pwolonje dire lavi dezumidifikatè ou a.
- Vide tank dlo a: When the "Full Water Tank" indicator illuminates, carefully pull out the water tank, empty the collected water, and reinsert it firmly until it clicks into place.
- Netwaye filtè lè a: Ou ta dwe netwaye filtè lè a chak de semèn oubyen pi souvan selon jan w ap itilize l la.
- Etenn aparèy la epi debranche li nan priz kouran an.
- Remove the air filter from the back or side of the unit (refer to diagram in full manual if available).
- Lave filtè a avèk dlo tyèd savon. Rense l byen epi kite l seche nèt nan lè a anvan ou mete l tounen.
- Pa sèvi ak dezumidifikatè a san filtè a.
- Netwayaj Eksteryè Inite a: Siye eksteryè a ak yon mou, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
- Depo: Si w ap sere aparèy la pou yon bon bout tan, asire w tank dlo a vid epi pwòp, epi filtè a pwòp epi sèk. Sere aparèy la kanpe dwat nan yon kote ki fre epi sèk.
NAN. Depanaj
Gade tablo ki anba a pou pwoblèm komen ak solisyon yo.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Inite pa limen. | No power; power cord loose; water tank full or not properly inserted. | Check power outlet and cord connection. Empty and reinsert water tank correctly. |
| Pa gen dlo ki te ranmase. | Humidity level set too high; room temperature too low; air filter clogged; continuous drainage hose connected and draining. | Lower desired humidity setting. Ensure room temperature is above 5°C (41°F). Clean air filter. Check continuous drainage setup. |
| Inite a ap mache san rete. | Humidity level not reached; unit set to continuous operation. | Allow more time for dehumidification. Set a specific humidity level if continuous operation is not desired. |
| Defrost indicator is on. | Coils are frosting up due to low ambient temperature. | This is normal operation. The unit will automatically defrost and resume dehumidification. |
If the problem persists after trying these solutions, please contact Comfee customer support.
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Non modèl | MDDE-10DEN3 |
| Mak | Comfee |
| Kapasite dezumidifikasyon | 10 Lit/24 èdtan |
| Kapasite tank dlo | 2 lit |
| Gwosè chanm rekòmande | Up to approximately 40 m³ |
| Refrijeran | R290 |
| Dimansyon (Pake) | 44.8 x 36.3 x 34 cm |
| Pwa atik | 11 Kilogram |
| Koulè | Blan/Gri |
| Operasyon Mode | Otomatik |
9. Garanti ak sipò
Specific warranty information for your Comfee MDDE-10DEN3 Dehumidifier is typically provided with your purchase documentation or on the manufacturer's official websit la. Tanpri gade resous sa yo pou plis detay konsènan pwoteksyon garanti a, tèm ak kondisyon yo.
For technical support, service, or inquiries about replacement parts, please contact Comfee customer service. Contact information can usually be found on the Comfee websit la oubyen sou anbalaj pwodwi w la.
You can visit the official Comfee store for more information: Comfee Store





