Crestron TSW-760-W-S

Manyèl Itilizatè Ekran Tactile Crestron 7"

Model: TSW-760-W-S | Brand: Crestron

1. Entwodiksyon

The Crestron 7" Touch Screen (Model TSW-760-W-S) is a versatile control surface designed for various environments, including wall, lectern, tabletop, or rack mount installations. It features a modern design with edge-to-edge glass and advanced high-definition Smart Graphics for an intuitive user experience.

This manual provides essential information for the proper setup, operation, and maintenance of your Crestron touch screen.

2. Karakteristik kle

3. Enstalasyon ak Enstalasyon

3.1 Debale ak Enspeksyon

Carefully remove the touch screen and all accessories from the packaging. Inspect for any signs of damage during transit. Retain the original packaging for future transport or storage.

3.2 Montaj Opsyon

The TSW-760-W-S supports various mounting configurations:

3.3 Koneksyon pouvwa ak rezo

The touch screen is powered via Power over Ethernet Plus (PoE+). Connect a standard Ethernet cable from a PoE+ enabled network switch or injector to the LAN port on the rear of the touch screen. This single connection provides both power and network connectivity.

Enpòtan: Ensure your network infrastructure supports PoE+ (802.3at) for proper operation.

Devan view of the Crestron 7 inch touch screen, white, displaying a music application interface.

Figi 1: Devan view of the Crestron 7" Touch Screen (TSW-760-W-S) showing its display and physical buttons.

Side view of the Crestron 7 inch touch screen mounted on a white tabletop stand, showing its slim profile ak pò koneksyon.

Figi 2: Side view of the Crestron 7" Touch Screen on an optional tabletop stand, highlighting its design and potential port locations.

4. Operasyon

4.1 Premye Limen ak Konfigirasyon

Upon first power-up, the touch screen will boot and connect to the network. Depending on your system's configuration, it may automatically load the user interface or require initial setup via Crestron programming software.

4.2 Navigating the User Interface

The touch screen features a customizable Smart Graphics user interface. Navigation is typically performed by tapping on icons, swiping through pages, and interacting with on-screen controls. Refer to your system integrator or Crestron programming documentation for specific UI layouts and functionalities.

4.3 Rekonesans vwa

To use voice recognition, activate the feature (if enabled in your system) and speak commands clearly into the built-in microphone. Common commands may include "Turn on lights," "Adjust temperature," or "Play music."

4.4 Web Browsing and Streaming

Aksè nan entegre web browser through its dedicated icon on the interface. For H.264 streaming video, ensure the source is properly configured within your Crestron system. The touch screen can display video feeds from compatible cameras or streaming devices.

4.5 Rava SIP Intercom and Room Scheduling

The Rava SIP Intercom allows for audio/video communication with other Rava-enabled devices. The room scheduling feature provides a visual display of room availability and allows for booking or extending meetings, depending on system configuration.

5. Antretyen

5.1 Cleaning the Touch Screen

Pou netwaye ekspozisyon an, sèvi ak yon ti moso twal mou, ki san pèl dampened with water or a non-abrasive screen cleaner. Do not use harsh chemicals, abrasive cleaners, or excessive liquid, as these can damage the screen or internal components.

5.2 Mizajou lojisyèl

Firmware and software updates are typically managed by your Crestron system integrator. Regular updates ensure optimal performance, security, and access to new features. Do not attempt to update firmware without proper guidance.

NAN. Depanaj

PwoblèmKòz posibSolisyon
Screen is blank / No powerNo PoE+ power; Network cable disconnected or faulty; PoE+ switch issue.Verify Ethernet cable connection. Ensure PoE+ switch is powered and functioning. Check switch port status.
Manyen ekran pa reponnSoftware glitch; System freeze.Perform a soft reset (if available, consult Crestron documentation) or power cycle the device by disconnecting and reconnecting the Ethernet cable.
Pa gen koneksyon rezoNetwork cable issue; Incorrect network settings; Network switch problem.Check Ethernet cable. Verify network settings with your system administrator. Ensure network switch is operational.
Voice recognition not workingFeature not enabled; Microphone issue; Environmental noise.Confirm voice recognition is enabled in the system programming. Speak clearly and reduce background noise.

For persistent issues, contact your Crestron system integrator or Crestron technical support.

7. Espesifikasyon

8. Garanti ak sipò

Crestron products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Crestron website. Technical support is generally provided through authorized Crestron dealers and system integrators.

For further assistance, please contact your Crestron dealer or visit www.crestron.com/support.

Dokiman ki gen rapò - TSW-760-W-S

Preview Crestron TSW-760-LB Room Availability Light Bar Installation Guide
This installation guide provides detailed instructions for mounting and connecting the Crestron TSW-760-LB Room Availability Light Bar, an accessory for the TSW-760 touch screen. It covers U.S. and European style installations, USB connections, and custom programming options for indicating room availability in enterprise environments.
Preview Crestron TSW-560/TSW-760/TSW-1060 Touch Screen Quick Start Guide
This guide provides instructions for installing and configuring the Crestron TSW-560, TSW-760, and TSW-1060 touch screens, including mounting, connections, and initial setup.
Preview Factory Restore Crestron TSW-560/760/1060 Touch Panel Guide
Step-by-step instructions for performing a factory restore on Crestron TSW-560, TSW-760, and TSW-1060 touch panels. Learn how to reset your device to factory settings.
Preview Crestron TSW-880 and TSW-1080: 8-inch and 10-inch Wall Mount Touch Screen Installation Guide
Installation guide for Crestron TSW-880 and TSW-1080 wall mount touch screens. Covers electrical box and drywall mounting procedures for 8-inch and 10-inch models, including necessary hardware and dimensions.
Preview Gid konsepsyon Crestron AV Framework: Senplifye Kontwòl AV ak Prezantasyon
Eksplore Gid Konsepsyon Crestron AV Framework la pou solisyon kontwòl ak prezantasyon odyovizyèl efikas, évolutif, ak pri abòdab. Aprann sou konfigirasyon sal yo, entegrasyon pwodwi, ak estrateji deplwaman pou anviwònman antrepriz ak edikasyon.
Preview Gid Operasyon Lojisyèl Crestron .AV Framework™ pou MPC3
This guide provides comprehensive instructions for setting up and configuring Crestron's .AV Framework™ software on MPC3 devices. It covers essential functions like selecting sources and displays, configuring device control, adding touch screens and button panels, and integrating with Crestron Fusion® software. The document details the setup process, accessing the configuration utility, and managing A/V switchers, along with product features and compatibility information.