Entwodiksyon
Welcome to the user manual for the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector. This device is designed to enhance your home safety system by detecting the sound of existing UL-listed smoke detectors and relaying that information to your Zigbee hub.
Pwodwi souview
The Ecolink FFZB1-ECO is a compact, battery-powered device that listens for the distinct siren pattern of a smoke detector. Upon detection, it transmits a signal to your compatible Zigbee hub, allowing for integration into your smart home system.
Image Description: A front view of the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector, a white, circular device with two horizontal slits and a small indicator light.
Karakteristik kle
- Wireless listening capability for UL-listed smoke detectors.
- Sends alarm signals to your Zigbee hub.
- Designed for easy installation and setup.
- Long battery life (up to five years).
- Compatible with Zigbee hubs such as Amazon Echo Plus and Samsung SmartThings Hub.
Image Description: An image illustrating the Ecolink FFZB1-ECO device in a modern living room setting, highlighting its discreet design and integration into a smart home environment.
Ki jan li fonksyone
The Ecolink FFZB1-ECO detector is positioned within hearing range of your existing UL-listed smoke detectors. When a smoke detector activates and emits its siren, the FFZB1-ECO recognizes this specific audio pattern. It then communicates this event wirelessly to your Zigbee hub, which can then trigger pre-configured actions, such as sending notifications to your smartphone or activating other smart home devices.
Image Description: A visual representation showing the Ecolink FFZB1-ECO device near a ceiling-mounted smoke detector, with smoke in the background, illustrating its function of detecting smoke alarm sounds.
Enstalasyon ak Enstalasyon
Kontni pake
- Ecolink FFZB1-ECO Siren Audio Detector
- 1 CR123A Battery (pre-installed)
- Mounting Hardware (screws, adhesive tape)
Image Description: The retail packaging for the Ecolink Firefighter Zigbee Wireless Audio Detector, showing the product name and brand logo.
Enstalasyon batri
The device comes with a CR123A battery pre-installed. To activate, ensure the battery tab is removed if present.
Pairing with a Zigbee Hub
- Place your Zigbee hub into pairing mode. Refer to your hub's specific instructions for this process.
- On the Ecolink FFZB1-ECO, press and hold the pairing button (often located inside the battery compartment or a small pinhole) for approximately 3 seconds until the LED indicator begins to flash.
- The device should appear on your Zigbee hub's interface. Follow the on-screen prompts to complete the pairing process.
- Once successfully paired, the LED indicator will stop flashing.
Monte Detektè a
Choose a location within 6 inches of your existing smoke detector for optimal audio detection. Ensure the device is not obstructed.
- Sèvi ak vis:
- Remove the back cover of the FFZB1-ECO.
- Mark the desired mounting location on the wall or ceiling.
- Drill pilot holes if necessary and secure the back cover using the provided screws.
- Reattach the main unit to the secured back cover.
- Sèvi ak tep adezif:
- Netwaye sifas aliye a byen.
- Apply the adhesive tape to the back of the device.
- Press the device firmly onto the desired surface for at least 30 seconds.
Image Description: The back view of the Ecolink FFZB1-ECO device, showing mounting holes and product identification labels including "Model: FFZB1-ECO" and "FCC ID: XQC-FFZB1".
Deskripsyon Imaj: Yon pwofesyonèl bò kotefile view of the Ecolink FFZB1-ECO device, illustrating its slim design and the "Slide to Remove" text on the casing.
Opere detektè a
Operasyon nòmal
Once installed and paired, the Ecolink FFZB1-ECO operates passively, listening for smoke alarm sounds. The LED indicator will typically remain off during normal operation.
Deteksyon alam
When a smoke detector siren is detected, the FFZB1-ECO will transmit an alarm signal to your Zigbee hub. Your hub will then execute any configured automations, such as sending notifications or activating other smart devices.
Tès detektè a
It is recommended to test the detector periodically to ensure proper function.
- Activate your existing smoke detector's test button.
- Listen for the smoke detector's siren.
- Verify that your Zigbee hub receives the alarm signal from the FFZB1-ECO and triggers any associated actions (e.g., a notification on your smartphone).
Antretyen
Ranplasman batri
The device uses one CR123A battery. When the battery level is low, your Zigbee hub should report a low battery status.
- Gently twist or slide the device off its mounting plate or remove it from the adhesive.
- Louvri lòj batri a.
- Retire ansyen pil CR123A a epi mete yon nouvo, toutpandan w ap respekte polarite a.
- Reattach the device to its mounting location.
- Verify that the device reconnects to your Zigbee hub and reports a healthy battery status.
Netwayaj
Clean the device periodically with a soft, dry cloth. Avoid using liquid cleaners or solvents.
Depanaj
Aparèy pa kouple
- Asire w ke sant Zigbee ou a nan mòd koneksyon.
- Confirm the device's battery is installed correctly and has sufficient charge.
- Try moving the device closer to the Zigbee hub during the pairing process.
- Reset the device to factory settings (refer to specific instructions for reset, often involves holding the pairing button for an extended period or removing/reinserting battery multiple times).
No Alarm Detection
- Verify the device is mounted within 6 inches of the smoke detector.
- Ensure the smoke detector's siren is loud enough and its sound pattern is consistent.
- Test the smoke detector manually and observe if the FFZB1-ECO's LED briefly indicates detection (if applicable, check manual for LED behavior during detection).
- Check the device's battery level via your Zigbee hub.
Fo Alam
- Ensure the device is not exposed to other loud noises that mimic a smoke alarm siren.
- Reposition the device if necessary to minimize interference from other sound sources.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Modèl | FFZB1-ECO |
| Mak | Ecolink |
| Koneksyon | Zigbee |
| Sous pouvwa | 1 x CR123A Battery (included) |
| Lavi batri | Jiska 5 ane |
| Dimansyon | 10.4 x 8 x 4.2 pous (Pwodwi) |
| Pwa atik | 1.09 ons (31 gram) |
| Koulè | Blan |
| UPC | 0851166005039 |
| ID FCC | XQC-FFZB1 |
| IC | 9863C-FFZB1 |
Garanti ak sipò
For warranty information and technical support, please refer to the official Ecolink websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la pou reklamasyon garanti.
