Manyèl Enstriksyon pou Bwat PC AeroCool Playa Slim Micro-ATX la

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your AeroCool Playa Slim Micro-ATX PC Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper functionality and safety.

Figi 1: Devan view of the AeroCool Playa Slim PC Case showcasing its integrated RGB lighting strip.

The AeroCool Playa is a versatile slim PC case designed to support Micro-ATX motherboards. It features a compact design allowing for both horizontal and vertical positioning, and includes integrated RGB lighting with 13 distinct modes.

2. Enfòmasyon sou Sekirite

• Always disconnect the power supply from the wall outlet before performing any installation, maintenance, or cleaning.
• Handle internal components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
• Kenbe ti pyès ak vis lwen timoun yo.
• Ensure proper ventilation around the PC case to prevent overheating.
• Avoid placing the PC case in direct sunlight or near heat sources.
• Pa eseye modifye bwat la oswa konpozan li yo, paske sa ka anile garanti a epi poze risk pou sekirite.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• AeroCool Playa Slim Micro-ATX PC Case
• Mounting Screws (for motherboard, drives, etc.)
• Manyèl itilizatè
• Vertical Stand Feet (for vertical orientation)

4. Espesifikasyon

5. Enstalasyon ak Enstalasyon

Follow these steps to assemble your PC components within the AeroCool Playa case.

5.1. Prepare Ka a

1. Mete bwat la sou yon sifas plat epi ki estab.
2. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward.

Figure 2: Internal layout of the AeroCool Playa Slim PC Case, illustrating the motherboard mounting area and drive bays.

5.2. Enstalasyon mèr

1. Install the I/O shield into the rear opening of the case.
2. Align your Micro-ATX motherboard with the standoffs inside the case. Ensure the standoffs match the screw holes on your motherboard.
3. Secure the motherboard using the provided mounting screws.

5.3. Enstalasyon Inite Alimantasyon (PSU)

The AeroCool Playa case supports SFX or Micro ATX power supplies, mounted at the bottom.

1. Position the PSU in the designated bottom mounting area.
2. Secure the PSU to the case using the appropriate screws from the accessory kit.
3. Route the PSU cables through the available cutouts for cable management.

5.4. Enstalasyon Disk Depo

The case provides bays for 2.5" and 3.5" drives.

• 2.5" Drives (SSDs): Locate the 2.5" drive mounting points, typically behind the motherboard tray or on dedicated brackets. Secure the SSDs using the provided screws.
• 3.5" Drives (HDDs): The case may utilize the optical drive slot for a 3.5" HDD. If installing a 3.5" drive, follow the specific instructions for its mounting location.

5.5. Enstalasyon Kat Ekspansyon

1. Retire kouvèti fant ekspansyon ki nesesè yo nan dèyè bwat la.
2. Insert your expansion card (e.g., graphics card) into the appropriate PCIe slot on the motherboard.
3. Secure the expansion card with a screw. Note that due to the slim design, low-profile expansion cards are generally recommended.

Figi 3: Dèyè view of the PC case, highlighting the I/O shield area, power input, and horizontal expansion slots.

5.6. Enstalasyon fanatik

The case includes one 80mm fan pre-installed at the top. Additional 80mm fans can be installed if desired.

1. Identify available fan mounting points (e.g., bottom, rear).
2. Secure the fans using the provided fan screws.
3. Connect the fan power cables to your motherboard or power supply.

5.7. Koneksyon Panèl Devan an

Connect the front panel cables (USB 2.0, USB 3.0, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

5.8. Case Orientation

The AeroCool Playa case can be positioned horizontally or vertically. For vertical orientation, attach the included stand feet to the bottom of the case for stability.

Figure 4: The AeroCool Playa Slim PC Case configured for horizontal desktop placement.

6. Operasyon Enstriksyon

6.1. Limen

1. Ensure all internal components are securely installed and all cables are properly connected.
2. Konekte kab kouran an nan PSU a ak nan yon priz miray.
3. Press the power button located on the front panel of the case.

6.2. Kontwòl ekleraj RGB

The AeroCool Playa case features an integrated RGB lighting strip on the front panel with 13 selectable modes.

• Locate the dedicated RGB control button on the front panel.
• Press the button repeatedly to cycle through the 13 different lighting effects and colors.
• Hold the button for a few seconds to turn the RGB lighting off or on.

7. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan PC ou yo.

• Netwayaj pousyè: Periodically clean dust from the case interior and fan filters using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
• Netwayaj eksteryè: Siye deyò bwat la ak yon twal mou, damp twal. Evite pwodui netwayaj abrazif oswa solvan.
• Jesyon kab: Ensure internal cables are neatly routed to improve airflow and prevent interference with fans.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

9. Garanti ak sipò

AeroCool products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official AeroCool websit.

For technical support or further assistance, please contact AeroCool customer service through their official channels. Keep your proof of purchase and model number (ACCS-PQ05014.11) ready when contacting support.