Manyèl Itilizatè Kat Mè Supermicro MBD-X11SCA-FO

1. Entwodiksyon

This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro MBD-X11SCA-F-O motherboard. Designed for server and workstation applications, this motherboard supports Intel 8th/9th Generation Core i9/i7/i5/i3/Pentium/Celeron and Intel Xeon E Processors, offering robust performance and reliability. Please read this manual thoroughly before proceeding with installation.

2. Karakteristik

• Sipò pou processeur: Single Socket H4 (LGA 1151) for Intel 8th/9th Generation Core i9/i7/i5/i3/Pentium/Celeron and Intel Xeon E Processors (Coffee Lake-S), with CPU TDP support up to 95W.
• Chipset: Intel C246.
• memwa: DDR4 ECC/Non-ECC UDIMM, up to 64GB across 4 DIMM slots.
• Depo: 8x SATA3 (6Gbps) ports via Intel C246 controller, supporting RAID 0, 1, 5, 10.
• Fant ekspansyon: Multiple PCI-Express 3.0 slots for various expansion cards.
• Grafik entegre: Onboard graphics with VGA output.
• Rezo: Dual Gigabit Ethernet LAN ports.
• Jesyon: Integrated Platform Management Interface (IPMI) for remote management.
• Faktè fòm: ATX.

3. Pake kontni

Verify that all items are present and in good condition. If any items are damaged or missing, contact your vendor.

• Supermicro MBD-X11SCA-F-O Motherboard
• I / O Shield
• SATA Câbles
• Gid referans rapid
• CD/DVD chofè

4. Enstalasyon

4.1. Enstalasyon eleman

Before installing any components, ensure the motherboard is placed on a non-conductive surface and you are grounded to prevent electrostatic discharge (ESD).

Yon anlè view of the Supermicro MBD-X11SCA-F-O motherboard, showcasing its various components including the CPU socket, RAM slots, PCIe slots, SATA ports, and I/O panel.

4.1.1. Enstalasyon CPU a

1. Louvri levye priz CPU a epi leve plak chajman an.
2. Carefully align the CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Do not force the CPU into the socket.
3. Desann plak chaj la epi byen sere l ak levye a.
4. Aplike pat tèmik sou CPU a epi enstale radyatè CPU a dapre enstriksyon manifakti a.

4.1.2. Enstalasyon memwa (RAM)

1. Open the clips on both ends of the DIMM slot.
2. Aliyen dan ki sou modil memwa DDR4 la ak kle ki nan plas DIMM lan.
3. Insert the module firmly until the clips snap into place. For optimal performance, install memory in matched pairs for dual-channel operation.

4.1.3. Enstalasyon Aparèy Depo

• Konekte kab done SATA yo ki soti nan disk depo ou yo (HDD/SSD) nan pò SATA yo sou kat manman an.
• Ensure power cables are connected to your storage devices from the power supply.

4.1.4. Enstalasyon Kat Ekspansyon

1. Locate an available PCI-Express slot.
2. Retire kouvèti plas ekspansyon ki koresponn lan nan chasi ou a.
3. Insert the expansion card firmly into the slot until it is seated correctly.
4. Sere kat la ak yon vis oswa yon klip retansyon.

4.2. Koneksyon pouvwa

• Konekte konektè prensipal ATX 24-pin ki soti nan ekipman pou pouvwa a ak header ki koresponn lan sou kat manman an.
• Connect the 8-pin EPS/CPU power connector to the CPU power header.

4.3. Koneksyon Panèl Devan an

Connect the cables from your chassis's front panel (power button, reset button, HDD LED, power LED, USB ports, audio ports) to the corresponding headers on the motherboard. Refer to the motherboard's silkscreen labels for correct pin assignments.

5. Opere

5.1. Premye Demaraj ak Konfigirasyon BIOS/UEFI

1. Apre ou fin rasanble sistèm ou an, konekte yon monitè, yon klavye ak yon sourit.
2. Power on the system. During POST (Power-On Self-Test), press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility.
3. Configure boot order, date/time, and other system settings as required. Save changes and exit.

5.2. Enstalasyon Sistèm Operasyon an

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install the operating system. After installation, install all necessary drivers from the provided driver CD or Supermicro's official websit.

5.3. IPMI Remote Management

The MBD-X11SCA-F-O features Integrated Platform Management Interface (IPMI), allowing for remote monitoring and management of the system, even when the operating system is not running. Connect a dedicated LAN cable to the IPMI port and configure network settings via the BIOS/UEFI or IPMI web koòdone.

6. Antretyen

• Retire pousyè: Regularly clean dust from the motherboard and components using compressed air to ensure proper airflow and prevent overheating.
• Mizajou BIOS: Periodically check the Supermicro website for BIOS/UEFI updates. Updates can improve stability, add support for new hardware, or fix bugs. Follow the provided instructions carefully when performing a BIOS update, often involving a USB drive.
• Tcheke Koneksyon: Periodically verify that all cables (power, data, expansion cards) are securely connected.

NAN. Depanaj

7.1. No Power / No POST

• Ensure the power supply is connected correctly to the motherboard (24-pin ATX and 8-pin EPS).
• Verify the power supply is switched on and functioning.
• Check that the CPU is correctly seated and the CPU cooler is properly installed.
• Reyajiste modil RAM yo. Eseye demarre ak yon sèl modil RAM enstale.
• Disconnect all non-essential peripherals and expansion cards to isolate the issue.

7.2. Operating System Not Booting

• Check the boot order in the BIOS/UEFI settings to ensure the correct drive is selected.
• Verify that the storage drive containing the operating system is properly connected and detected by the BIOS/UEFI.
• If recently installed, ensure all necessary drivers are loaded.

7.3. Konpozan pa detekte

• For RAM, ensure modules are fully seated in their slots.
• For expansion cards, ensure they are correctly inserted into the PCIe slot and secured.
• For SATA devices, check both data and power cable connections.
• Consult the full motherboard manual for specific troubleshooting steps or beep codes.

8. Espesifikasyon

9. Garanti ak sipò

Supermicro products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product or visit the official Supermicro website. For technical support, driver downloads, and further documentation, please visit the Supermicro support portal.

Supermicro Support: https://www.supermicro.com/support