IKEA Drawer Unit Assembly and User Manual

1. Entwodiksyon

Thank you for choosing the IKEA Drawer Unit. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Enfòmasyon sou Sekirite

• Tip-over Hazard: Furniture tip-overs can cause serious or fatal crushing injuries. Always secure this unit to the wall using the provided anti-tip device.
• Asanble: Assembly must be carried out by a competent person. Incorrect assembly can lead to the furniture tipping or falling, causing serious injury.
• Ti Pati: Keep all small parts, such as screws and fittings, out of reach of children during assembly to prevent choking hazards.
• Limit pwa: Pa twò chaje tiwa yo. Distribye pwa a egalego pou kenbe estabilite.
• Plasman: Place the unit on a level surface. Uneven surfaces can affect stability and drawer function.

3. Pake kontni

Before assembly, ensure all parts are present. Refer to the separate assembly diagram for a detailed list of components and hardware. If any parts are missing or damaged, contact IKEA customer service.

Imaj 1: Egzanpample of IKEA Drawer Unit components. This image illustrates the various panels, hardware, and drawer parts typically included in the package, laid out before assembly begins.

4. Enstalasyon ak Asanble

Assembly is required for this IKEA Drawer Unit. Follow the steps below and refer to the included graphical instructions for detailed guidance.

1. Prepare espas travay: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture parts and your floor.
2. Idantifye pati yo: Unpack all components and identify them using the parts list in the separate assembly diagram.
3. Rasanble ankadreman: Begin by assembling the main frame of the drawer unit. Attach the side panels to the top and bottom panels using the provided dowels and cam locks/screws. Ensure all connections are secure.
4. Tache panèl dèyè a: Secure the back panel to the frame using small nails or screws. This adds stability and squareness to the unit.
5. Enstale Koulis Tiwa yo: Attach the drawer runners to the inside of the frame according to the diagram. Pay attention to the orientation (left/right, front/back).
6. Rasanble tiwa yo: For each drawer, assemble the front, back, and side panels. Slide the bottom panel into the grooves. Attach the drawer runners to the sides of the assembled drawer.
7. Mete tiwa yo: Carefully slide each assembled drawer onto its respective runners in the main frame.
8. Tache manch yo: Secure handles or knobs to the drawer fronts.
9. Fikse sou miray la: Crucially, attach the anti-tip device to the back of the drawer unit and then to a wall stud or appropriate wall anchor. This prevents the unit from tipping over.

Tools required: Hammer, screwdriver (Phillips head), measuring tape.

5. Operasyon Enstriksyon

• Ouvèti/Fèmen Tiwa: Gently pull or push the drawer fronts to open and close. Avoid forcing drawers.
• Chaje: Distribute items evenly within the drawers. Avoid placing excessively heavy items in a single drawer, especially in upper drawers, as this can affect stability.
• Estabilite: Always ensure the unit is securely anchored to the wall. Do not climb on or lean heavily on the unit.

6. Antretyen

• Netwayaj: Siye pwòp ak anonsamp cloth and a mild cleaner. Wipe dry with a clean cloth. Avoid abrasive cleaners or harsh chemicals.
• Fastener: Periodically check all assembly fasteners (screws, cam locks) and re-tighten if necessary to maintain structural integrity.
• Kourè Tiwa: If drawers become stiff, a small amount of silicone-based lubricant can be applied to the runners, but typically this is not required for IKEA units.

NAN. Depanaj

• Drawers stick or don't close properly:
  • Check if the unit is on a level surface.
  • Asire w tout vis asanblaj yo sere byen sere.
  • Verify that drawer runners are correctly installed and aligned.
  • Check for obstructions inside the drawer or on the runners.
• Unit wobbles:
  • Asire w ke aparèy la mete sou yon sifas ki plat.
  • Re-tighten all assembly fasteners.
  • Confirm the back panel is securely attached, as it contributes to stability.
  • Verify the unit is properly anchored to the wall using the anti-tip device.

8. Espesifikasyon

9. Garanti ak sipò

IKEA products are designed with quality and durability in mind. For specific warranty information regarding your Drawer Unit, please refer to the warranty documentation included with your purchase or visit the official IKEA websit.

For customer support, missing parts, or further assistance, please contact IKEA customer service through their official channels. Have your proof of purchase and product model information ready.