Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.

Enfòmasyon sou Sekirite

AVÈTISMAN: Pwodui sa a ka ekspoze ou nan pwodwi chimik ki gen ladan plon, ki se Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Exterior Lever Assembly
• Asanble Levier Enteryè
• Adjustable Latch (2-3/8" - 2-3/4" backset)
• Rounded Steel Faceplate
• Plak grèv
• Montaj Vis
• Manyèl Enstriksyon

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.

Enstalasyon ak Enstalasyon

This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview nan pwosesis enstalasyon an:

1. Prepare pòt la: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
2. Adjust the Latch: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
3. Enstale levye ekstèn lan: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
4. Enstale levye enteryè a: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
5. Enstale plak grèv la: Kole plak grèv la sou ankadreman pòt la, aliyen li ak boulon loket la. Sere l ak vis.
6. Operasyon tès: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.

Enstriksyon Operasyon

To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.

Antretyen

To maintain the finish and functionality of your door lever, follow these guidelines:

• Netwayaj: Clean the lever with a soft, damp twal. Evite itilize pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif, paske sa yo ka domaje fini an.
• Lubrifikasyon: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
• Sere: Detanzantan tcheke epi sere nenpòt vis montaj ki lach pou asire levye a rete byen tache ak pòt la.

Depanaj

Espesifikasyon

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).

Garanti ak sipò

Pou enfòmasyon sou garanti a oswa sipò teknik, tanpri al gade paj ofisyèl Amazon Basics la. website or contact Amazon customer service. Keep your purchase receipt for warranty claims.