ELEKTROPLAST AK3-AT1-GL-M-X Circuit Breaker Panel User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your ELEKTROPLAST AK3-AT1-GL-M-X Circuit Breaker Panel. This stable fuse box is constructed from ABS plastic, making it ideal for installation in damp rooms and outdoors due to its IP65 protection class.

Karakteristik kle yo enkli:

• Integrated top-hat rail with space for 16 circuit breakers (16TE).
• Integrated PE+N terminals.
• Transparent, darkened front door for visibility of internal components.
• Multiple cable entry points on the side, top, and bottom.
• Spacious interior for convenient wiring.

2. Enfòmasyon sou Sekirite

WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power at the main service panel before installing or servicing the circuit breaker panel.
• Sèvi ak ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou gan izole ak linèt sekirite.
• Asire w ke tout koneksyon an sekirite epi byen izole.
• Do not operate the panel if it is damaged or if any components are missing.

3. Enstalasyon ak Enstalasyon

The ELEKTROPLAST AK3-AT1-GL-M-X is designed for screw-in installation.

3.1 Montaj

The panel is suitable for both indoor and outdoor use, including damp environments, thanks to its IP65 protection rating. Securely mount the panel to a stable surface using appropriate screws through the designated mounting points. Ensure the mounting surface can support the weight of the panel and its contents.

3.2 Antre kab

The enclosure features pre-marked or knock-out cable entry points on the side, top, and bottom. Select the appropriate entry points for your wiring needs. Use suitable cable glands or conduits to maintain the IP65 rating and protect wiring from environmental factors.

3.3 Fil elektrik Entèn

The spacious interior of the panel facilitates easy wiring. Install circuit breakers onto the integrated top-hat rail. Connect the PE (Protective Earth) and N (Neutral) conductors to the integrated PE+N terminals as required by your electrical system design and local codes.

Figure 1: ELEKTROPLAST AK3-AT1-GL-M-X Circuit Breaker Panel. This image shows a white, rectangular ELEKTROPLAST circuit breaker panel with a transparent, darkened front door. The panel features screw holes for mounting and visible cable entry points on the sides and top. The clear door allows visibility of internal components, such as the DIN rail and terminals.

4. Operasyon

The ELEKTROPLAST AK3-AT1-GL-M-X panel is designed for straightforward operation.

4.1 Accessing Circuit Breakers

The transparent, darkened front door provides a clear view of the installed circuit breakers and their status indicators without needing to open the panel. To access the circuit breakers for switching or maintenance, unlatch and open the front door. Ensure the door is securely latched shut after use to maintain the IP65 protection.

4.2 Circuit Breaker Functionality

Operate the circuit breakers according to their individual manufacturer's instructions. The integrated top-hat rail is designed to securely hold standard DIN rail mounted circuit breakers and other modular devices.

5. Antretyen

Regular maintenance ensures the longevity and safe operation of your circuit breaker panel.

5.1 Netwayaj

Clean the exterior of the panel periodically with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic material or the transparent door. Ensure the panel is dry before re-energizing if power was disconnected for cleaning.

5.2 Enspeksyon

Periodically inspect the panel for any signs of damage, such as cracks in the housing or door, loose screws, or corrosion. Check that all cable glands are tight and that the door seal is intact to maintain the IP65 rating. If any damage is found, consult a qualified electrician for repair or replacement.

NAN. Depanaj

If you experience issues with your circuit breaker panel, consider the following:

• No Power to Circuits: Check if the main circuit breaker or individual branch circuit breakers are tripped. Reset them if necessary. Ensure the main power supply to the panel is active.
• Deklanchman souvan: This may indicate an overload or a short circuit in the connected electrical system. Consult a qualified electrician to diagnose and resolve the underlying issue.
• Antre dlo: If water is found inside the panel, immediately disconnect power and contact a qualified electrician. This indicates a breach in the IP65 seal, which must be repaired to prevent hazards.

For any complex electrical issues, always consult a qualified and licensed electrician. Do not attempt repairs beyond your expertise.

7. Espesifikasyon

8. Garanti ak sipò

For information regarding product warranty, technical support, or replacement parts, please contact ELEKTRO-PLAST customer service directly. Refer to the product packaging or the manufacturer's official websit pou detay kontak.