ICOM Six-Position Charger with AC Adapter (US)

Pwodwi souview

The ICOM BC214-1 is a robust six-position charging station designed for efficient charging of ICOM M93 handheld VHF radios. This unit includes a dedicated AC adapter with a US plug, providing a complete solution for managing multiple radio batteries simultaneously. Its design focuses on convenience and reliability for professional and recreational users.

Enstriksyon Enstalasyon

Follow these steps to set up your ICOM BC214-1 six-position charger:

1. Depake konpozan: Carefully remove the charging station and the AC adapter from their packaging.
2. Konekte adaptè AC: Insert the DC output plug of the supplied AC adapter into the DC input jack located on the rear or side of the BC214-1 charging station.
3. Koneksyon pouvwa: Plug the AC adapter into a standard 120V AC wall outlet (US plug type). Ensure the power outlet is easily accessible.
4. Plasman: Place the charging station on a stable, flat surface, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
5. Tcheke inisyal: Once connected, observe any indicator lights on the charger. These lights typically illuminate to confirm power is supplied.

Figi 1: The ICOM BC214-1 six-position charging station shown with its accompanying AC adapter. The charger features six individual slots for radios or battery packs, and the AC adapter provides power to the unit.

Enstriksyon Operasyon

To charge your ICOM M93 handheld VHF radios or their battery packs using the BC214-1 charger:

1. Mete Radyo/Pil: Gently slide an ICOM M93 handheld VHF radio (with battery attached) or a compatible battery pack into one of the six charging slots. Ensure it is seated firmly and correctly.
2. Endikatè chaje: Each charging slot typically has an LED indicator. When a radio or battery is correctly inserted and charging, the LED for that slot will illuminate (e.g., red for charging, green for fully charged). Refer to your radio's specific manual for detailed LED behavior if different.
3. Tan pou chaje: Charging time will vary depending on the battery's capacity and its current charge level. Allow several hours for a full charge from a completely depleted battery. The charger is designed to prevent overcharging.
4. Remove When Charged: Once the charging indicator shows a full charge (e.g., turns green or extinguishes), carefully remove the radio or battery pack from the slot.
5. Multiple Charging: You can charge up to six radios or battery packs simultaneously.

Antretyen

Proper maintenance ensures the longevity and optimal performance of your charger:

• Netwayaj: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe down the exterior of the charging station. Do not use abrasive cleaners, solvents, or harsh chemicals. Avoid getting moisture into the charging slots.
• Depo: Lè w pa itilize chargeur a pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Enspeksyon: Periodically inspect the AC adapter cord for any signs of damage, fraying, or exposed wires. If any damage is found, discontinue use immediately and replace the adapter.
• Vantilasyon: Ensure the charger's ventilation openings are not blocked during operation to prevent overheating.

Depanaj

If you encounter issues with your ICOM BC214-1 charger, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ICOM customer support for further assistance.

Espesifikasyon

Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ICOM websit la. Kenbe prèv acha ou pou reklamasyon garanti.

ICOM Official Websit: www.icomamerica.com (or relevant regional ICOM websit)