SKIL SR250801 Corded Detail Sander Instruction Manual

1. Entwodiksyon

Thank you for choosing the SKIL SR250801 Corded Detail Sander. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the sander and keep it for future reference.

The SKIL SR250801 is a compact and powerful detail sander designed for fine finishes and intricate sanding tasks. It features a 1-amp motor, delivering 12,000 orbits per minute (OPM) for smooth performance. Its micro-filtration system and ergonomic design ensure comfortable use and efficient dust management.

Figure 1: SKIL SR250801 Corded Detail Sander

2. Enfòmasyon sou Sekirite

Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.

Avètisman Sekirite Jeneral:

• Mete pwoteksyon pou je: Toujou mete linèt sekirite oswa linèt sekirite ak plak pwotèj bò.
• Mete yon mask kont pousyè: Sanding operations can create significant dust. Use a dust mask or respirator to prevent inhalation of harmful particles.
• An sekirite pou pyès travay la: Toujou clamp or otherwise secure the workpiece to a stable surface. Holding the workpiece by hand may result in loss of control and injury.
• Kenbe zòn travay pwòp: Zòn ankonbre ak ban envite blese.
• Evite demaraj aksidantèl: Asire w ke switch la nan pozisyon OFF anvan ou branche zouti a.
• Unplug Tool When Not in Use: Always unplug the sander from the power source before making adjustments, changing accessories, or storing the tool.
• Pa depase: Kenbe bon pye ak balans tout tan.
• Sèvi ak bon zouti: Pa fòse zouti oswa atachman an fè yon travay pou li pa te fèt.

3. Ki sa ki nan bwat la

Your SKIL SR250801 Corded Detail Sander package should include the following items:

• 1A Mouse Sander (SKIL SR250801)
• 3 Sanding Papers (120 grit)
• Dust box with Micro-filtration

Figure 2: Included items: Sander and sanding papers

4. Enstalasyon

4.1 Attaching Sanding Paper

1. Asire w ke ponseuz la debranche nan sous kouran an.
2. Align the holes on the sanding paper with the holes on the sander's base plate. These holes are crucial for efficient dust collection.
3. Press the sanding paper firmly onto the hook-and-loop base plate. The hook-and-loop system ensures a secure attachment and easy replacement.

4.2 Attaching the Dust Box

1. Asire w ke ponse a debranche.
2. Slide the dust box onto the dust port at the rear of the sander until it clicks securely into place.
3. Verify that the dust box is firmly attached to prevent dust leakage during operation.

5. Operasyon Enstriksyon

5.1 Limen/Etenyen

• To turn the sander ON, slide the dust-sealed ON/OFF switch to the 'I' position.
• To turn the sander OFF, slide the switch to the 'O' position.

5.2 Teknik sablaj

• Hold the sander firmly with both hands. The ergonomic design and soft rubber grip are intended to reduce hand fatigue.
• Apply light, even pressure to the workpiece. Excessive pressure will not speed up sanding and may damage the surface or the tool.
• Move the sander in smooth, overlapping strokes across the surface.
• For corners and tight spaces, utilize the pointed tip of the sander's base plate.

Figure 3: Proper sanding technique with the detail sander

5.3 Koleksyon Pousyè

The sander is equipped with a micro-filtration dust box to collect sanding debris. For enhanced dust collection, a 1-1/4 inch dust port allows for attachment to a vacuum system (not included).

6. Antretyen

Regular maintenance ensures optimal performance and extends the life of your tool. Always unplug the sander before performing any maintenance.

6.1 Emptying and Cleaning the Dust Box

1. Detach the dust box from the sander by pulling it away from the dust port.
2. Empty the collected dust into a waste receptacle.
3. Clean the micro-filtration filter inside the dust box by tapping it gently or using compressed air to remove fine dust particles.
4. Reattach the clean dust box securely to the sander.

Figure 4: Detachable dust box for easy cleaning

6.2 Replacing Sanding Sheets

• When sanding paper becomes worn or ineffective, peel it off the hook-and-loop base plate.
• Attach a new sanding sheet as described in Section 4.1.

6.3 Netwayaj jeneral

• Siye deyò ponse a avèk yon twal pwòp, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
• Periodically inspect the power cord for any damage. If damaged, have it repaired by a qualified service technician.

NAN. Depanaj

If you encounter issues with your SKIL SR250801 Corded Detail Sander, refer to the following common problems and solutions:

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact SKIL customer support.

8. Espesifikasyon

9. Garanti ak sipò

For detailed warranty information, please refer to the warranty card included with your product or visit the official SKIL website. If you require technical assistance, replacement parts, or have any questions regarding your SKIL SR250801 Corded Detail Sander, please contact SKIL customer support.

SKIL Customer Support:
Websit: www.skil.com
Phone: Refer to your product documentation for regional contact numbers.