WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set Instruction Manual

1. Entwodiksyon

This manual provides essential information for the safe operation, maintenance, and care of your WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set. Please read these instructions carefully before using the tool and retain them for future reference.

Imaj 1.1: Plis paseview of the WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set, including the drill, battery, charger, storage bag, and various drill and driver bits.

2. Jeneral Sekirite Enstriksyon

Toujou swiv prekosyon sekirite debaz yo pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl lè w ap itilize zouti elektrik.

• Sekirite Zòn Travay: Kenbe zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Evite kontak kò ak sifas ki konekte ak tè tankou tiyo, radyatè, recho, ak frijidè. Pa ekspoze zouti elektrik yo anba lapli oswa kondisyon mouye.
• Sekirite Pèsonèl: Toujou mete pwoteksyon pou je yo. Sèvi ak pwoteksyon pou zòrèy lè w ap opere pou yon bon bout tan. Abiye byen; evite rad ki lach oswa bijou. Mare cheve w long.
• Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte ploge a nan sous kouran an ak/oswa pake batri a nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Itilizasyon ak antretyen pil: Rechaje sèlman avèk plato manifakti a espesifye a. Pa sèvi ak pil yo avèk okenn lòt zouti elektrik.

3. Konpozan ak Karakteristik Pwodwi

The WORKPRO Pink Cordless 20V Lithium-ion Drill Driver is designed for various drilling and driving tasks. Key components and features include:

• 20V Motor: Provides strong and steady power.
• 1.5Ah Lithium-ion Battery: Ensures endurable run time.
• Anviwònman 2 Vitès Varyab: Offers speeds of 0-400 rpm and 0-1500 rpm for different applications.
• 21+1 Torque Adjustment: Delivers 203 in-Lbs (23 N.M) of max torque with precise adjustment.
• 3/8" (10mm) Keyless Chuck: Provides superior bit retention and easy bit changes.
• Manch grip mou: Enhances comfort and control during use.
• Limyè ki ap dirije: Eklere zòn travay la pou pi bon vizibilite nan espas ki fè nwa.
• Forward/Reverse Rotation Control: Allows for easy switching between drilling/driving and removing screws.
• Clip senti: Pou pote pratik.

Image 3.1: Labeled diagram illustrating the key components of the drill driver, including the torque adjustment ring, keyless chuck, two-speed gear control, forward/reverse control, LED light, on/off switch, magnetic base, battery pack release button, and belt clip.

4. Enstriksyon Enstalasyon

4.1. Chaje batri

The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use. Use only the charger provided with your drill driver set.

1. Konekte chargeur a nan yon priz elektrik estanda.
2. Insert the battery pack into the charger. Ensure it is seated correctly.
3. Kite batri a chaje jiskaske limyè endikatè ki sou plato a montre yon chaj konplè (gade enstriksyon plato a pou endikasyon espesifik limyè yo).
4. Yon fwa li chaje, dekonekte batri a nan plato a epi debranche plato a nan priz la.

4.2. Enstale epi retire pake batri a

• Pou Enstale: Aliyen pake batri a ak baz manch perçage a epi glise l anndan jiskaske li fè yon klik byen fèm nan plas li.
• Pou retire: Press the battery pack release button (located on the side of the battery pack) and slide the battery pack out.

4.3. Installing Drill/Driver Bits

The drill features a 3/8" (10mm) keyless chuck for easy bit changes.

1. Ensure the drill is off and the battery pack is removed for safety.
2. Grasp the rear half of the chuck and rotate the front half counter-clockwise until the chuck jaws are open wider than the bit you intend to insert.
3. Insert the drill bit or driver bit into the chuck jaws. Ensure the bit is centered and fully seated.
4. Vire mwatye devan mandrin lan nan sans zegwi mont lan pou sere machwè yo byen fèm otou mèch la. Sere byen fèm ak men ou.

Image 4.1: Visual guide demonstrating how to open and close the keyless chuck to insert or remove drill bits.

5. Operasyon Enstriksyon

5.1. On/Off Switch and Variable Speed Control

The trigger switch controls the drill's power and speed. Pressing the trigger initiates operation, and the speed is variable based on pressure applied.

• To turn on, press the trigger switch.
• To increase speed, apply more pressure to the trigger.
• Pou etenn li, lage switch deklanche a.

5.2. Two-Speed Gear Control

The drill features a two-speed gear selector located on top of the tool.

• Position 1 (Low Speed, 0-400 RPM): Recommended for driving screws and applications requiring higher torque.
• Position 2 (High Speed, 0-1500 RPM): Rekòmande pou perçage ak aplikasyon ki mande wotasyon pi rapid.

Always ensure the drill is stopped before changing gear positions to prevent damage.

Image 5.1: Illustration of the two-speed transmission settings, indicating low speed (0-400 RPM) for screwdriving and high speed (0-1500 RPM) for drilling.

5.3. koupl ajisteman bag

The torque adjustment ring allows you to select the desired torque setting for driving screws, preventing over-tightening or stripping. The drill offers 21+1 torque settings.

• Rotate the ring to align the desired number with the indicator mark. Lower numbers are for smaller screws or softer materials; higher numbers are for larger screws or harder materials.
• The drill icon setting is for drilling applications, providing maximum torque.

Imaj 5.2: Gwo plan view of the 21+1 torque adjustment ring, showing the numbered settings and the drill icon for maximum torque.

5.4. Forward/Reverse Rotation Control

The forward/reverse lever is located above the trigger switch. It controls the direction of rotation.

• Push the lever to the left for forward rotation (drilling and driving screws).
• Push the lever to the right for reverse rotation (removing screws or jammed bits).
• When the lever is in the center position, the trigger is locked, preventing accidental startup.

5.5. Limyè Travay ki ap dirije

The integrated LED light activates when the trigger is pressed, illuminating the work surface for better visibility.

Image 5.3: The drill's LED light in operation, providing illumination in a dimly lit area.

5.6. Aplikasyon

This drill driver is suitable for various household tasks, including:

• Drilling holes in wood (up to 5/8" or 16mm) and metal (up to 7/32" or 6mm).
• Driving and removing screws.
• Rasanble mèb.
• Hanging shelves and decorations.

Image 5.4: A user operating the drill driver to fasten a screw into a wooden surface.

Image 5.5: A user operating the drill driver to create a pilot hole in a wooden board.

6. Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi zouti ou a.

• Netwayaj: Keep the ventilation openings clear and free of dust. Use a soft, damp twal pou netwaye zouti a casing. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Bwòs kabòn: This is a carbon brush drill. Sparks are normal during initial use and should decrease over time. If sparks become excessively large or persistent, it may indicate a malfunction or worn brushes, requiring professional inspection.
• Depo: Store the drill driver, battery, and charger in a cool, dry place, away from direct sunlight and moisture. Use the provided storage bag for protection.
• Swen batri: Do not allow the battery to fully discharge. Recharge the battery regularly, even when not in use, to maintain its lifespan.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, please refer to the documentation included with your purchase or visit the official WORKPRO website. If you encounter any issues or require technical assistance, please contact WORKPRO customer support.

Manifakti: Zhejiang Minglei Tools Industrial Co., Ltd.

UPC: 820909749172