Behringer NX1000 Ultra-Lejè 1000W Klas-D Puisans Amplifier Manyèl Enstriksyon

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.

Devan view of the Behringer NX1000 amplaviyè, montreasing konsepsyon kontra enfòmèl ant li yo ak kontwòl sou panèl devan an.

2. Ki sa ki nan bwat la

Verifye ke tout konpozan yo prezan lè w ap debale l:

• Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Amplifier
• Pouvwa kab
• Manyèl Enstriksyon (dokiman sa a)

3. Karakteristik kle

• Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
• Alimantasyon mòd switch ultra-efikas pou odyo san bri, repons tanporè siperyè ak konsomasyon enèji ki ba.
• Built-in stereo crossover with low-cut, high-cut and full range Mode.
• SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.

An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.

A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.

4. Enstalasyon

Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your amplifier:

4.1. Montaj etajè

The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.

Side profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.

4.2. Koneksyon odyo

Konekte sous odyo ou a (miksè, pre-amplaviyè, elatriye) pou la amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.

Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.

Detaye view of the rear panel, showing input and output connectors for audio signals and speakers.

4.3. Koneksyon pouvwa

Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.

4.4. Gid Videyo Enstalasyon

5. Opere a Amplifier

5.1. Powering On / Off

Peze a POUVWA bouton ki sou panèl devan an pou vire amplifier on or off. The POUVWA LED will illuminate when the unit is active.

Close-up of the power button, indicating its location on the front panel.

5.2. Kontwòl Volim

Ajiste a CHANNEL A epi CHANNEL B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.

5.3. Seleksyon mòd

On the rear panel, use the MÒD switch to select between STEREO, PON, oswa PARALÈL operation, depending on your speaker configuration requirements.

• STEREO: Each channel operates independently, providing separate left and right audio signals.
• BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
• PARALÈL: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.

5.4. Anviwònman kwazman

Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.

5.5. Endikatè ki ap dirije

The front panel features several LED indicators:

• PRO (Protect): Li limen si la amplifier enters protection mode due to overload, overheating, or short-circuit.
• LIMIT: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
• SIYAL: Lights up when an audio signal is present on the respective channel.
• POUVWA: Endike ke a amplifier se limen.

5.6. Pwodwi souview Videyo

6. Antretyen

Pou asire lonjevite ak pèfòmans optimal ou amplaviyè, swiv konsèy antretyen sa yo:

• Kenbe aparèy la pwòp lè w siye l avèk yon twal mou epi sèk. Evite itilize pwodui netwayaj abrazif oswa solvan.
• Asire bon jan vantilasyon alantou an amplifier to prevent overheating. Do not block the ventilation grilles.
• Tcheke tout koneksyon kab yo regilyèman pou wè si yo byen anfòm epi si gen siy itilizasyon.

NAN. Depanaj

If you encounter issues with your Behringer NX1000 amplifier, gade pwoblèm ak solisyon komen sa yo:

• Pa gen Sòti Son:
  • Check all audio input and output connections.
  • Asire w la amplifier is powered on and the POWER LED is illuminated.
  • Verify that input sources are active and sending a signal.
  • Adjust channel gain knobs and master volume on your mixer/preamp.
• Son defòme:
  • Check if the LIMIT LED is illuminated; reduce input level if it is.
  • Ensure speaker impedance matches the ampkapasite lifier yo.
  • Inspect speaker cables for damage or incorrect wiring.
• Amplifier Enters Protect Mode (PRO LED illuminated):
  • Etenn la amplifier and disconnect all speakers.
  • Check for short circuits in speaker cables or faulty speakers.
  • Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
  • Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
• Twòp bri fanatik:
  • Asire w la amplifier has sufficient airflow and is not in an enclosed space.
  • Clean any dust buildup from the fan and ventilation grilles.

8. Espesifikasyon

9. Garanti & Sipò

The Behringer NX1000 amplifier vini ak yon Garanti limite. For detailed warranty information, product support, or service inquiries, please visit the official Behringer websit la oubyen kontakte sèvis kliyan yo dirèkteman.

Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.