XUNATALED 12V 33ft 600 Units SMD 5050 RGB+Warm White LED Strip Lights Kit Instruction Manual

1. Pwodwi souview

The XUNATALED LED Strip Lights Kit provides flexible, color-changing illumination for various indoor and outdoor applications. This kit includes 33 feet of SMD 5050 LED strips with 600 units, offering both RGB and warm white lighting options. Control is managed via a 40-key IR remote, powered by a 12V supply.

Image 1.1: Complete XUNATALED LED Strip Lights Kit, including two rolls of LED strips, a 40-key IR remote control, an IR receiver, and a 12V power adapter.

The strips are designed for versatility, featuring a waterproof construction (IP65) and a self-adhesive backing for easy installation. They are suitable for decorative lighting in areas such as kitchens, bedrooms, and outdoor spaces.

Image 1.2: Various application examples showing the XUNATALED LED strip lights installed in a kitchen under cabinets and behind a bed headboard, demonstrating their decorative potential.

2. Ki sa ki nan bwat la

Your XUNATALED LED Strip Lights Kit includes the following components:

• LED Strip Lights (33ft, 600 units SMD 5050, RGB+Warm White)
• 40-Key IR Remote Control
• IR Receiver/Controller
• 12V Power Supply/Adapter

Imaj 2.1: Detaye view of the kit components, including the LED strip reels, IR remote, IR receiver, and power adapter.

Image 2.2: Close-up of the 12V AC/DC power adapter included in the kit, showing input/output specifications.

3. Espesifikasyon

4. Enstriksyon Enstalasyon

1. Prepare sifas la: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's effectiveness.
2. Mezire epi koupe (Si ou vle): If necessary, measure the desired length for your installation. The LED strips can be cut along the designated marks (usually indicated by a copper pad and a scissor icon). Do not cut in other areas, as this will damage the strip.

Imaj 4.1: Gwo plan view of the LED strip, highlighting the 5050 RGB and warm white beads, and indicating the safe cutting points along the strip.
3. Tache bann lan: Peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, ensuring firm contact.


Image 4.2: The flexible LED strip demonstrating its bendable nature and the self-adhesive 3M backing for easy installation.

4. Connect the IR Receiver: Connect the 4-pin connector of the LED strip to the IR receiver/controller. Ensure the arrows on both connectors align correctly.
5. Konekte ekipman pou pouvwa a: Plug the DC output of the 12V power adapter into the input port of the IR receiver.
6. Pouvwa sou: Ploge adaptè pouvwa a nan yon priz elektrik estanda.
7. Preparasyon a distans: Before using the 40-key IR remote control, remove the transparent plastic sheet from the battery compartment to activate the battery.

5. Operasyon Enstriksyon

The XUNATALED LED Strip Lights are controlled using the included 40-key IR remote. Point the remote directly at the IR receiver for optimal response.

Fonksyon kontwòl remote:

• On/Off: Peze a ON or OFF buttons to power the lights.
• Ajisteman klète: Sèvi ak la Klere moute epi Klète desann buttons to adjust the light intensity.
• Seleksyon koulè: Select from 20 preset colors, including various RGB shades and warm white, by pressing the corresponding color buttons.
• Mòd dinamik:
  • FLASH: Cycles through colors rapidly.
  • STROBE: Li flache yon sèl koulè.
  • Fennen: Tranzisyon ant koulè yo fèt san pwoblèm.
  • LIS: Gradual color change.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • FADE3/FADE7: Fades between 3 or 7 colors.
• Koulè pou fè lakay ou: The remote may include DIY buttons to create and save custom color mixes (refer to remote specific instructions if available).

Image 5.2: The LED strip illuminated in a vibrant blue color, showcasing one of the many available color options.

Image 5.3: The LED strip illuminated in a bright green color, demonstrating another color selection from the remote.

Image 5.4: The LED strip illuminated in a rich red color, illustrating the range of colors achievable with the RGB+Warm White LEDs.

6. Antretyen

• Netwayaj: Siye bann LED yo dousman avèk yon twal mou epi sèk pou retire pousyè a. Pou pousyè ki difisil pou retire, sèvi ak yon twal yon ti kras mouye.amp cloth, ensuring the power is disconnected. Avoid harsh chemicals or abrasive cleaners.
• Tcheke Koneksyon: Periodically inspect all connections (strip to receiver, receiver to power supply) to ensure they are secure.
• Batri Remote: If the remote control becomes unresponsive, replace the CR2025 coin cell battery.
• Entegrite ki enpèmeyab: For outdoor installations, regularly check the waterproof seals and connections for any signs of wear or damage to maintain IP65 rating.

NAN. Depanaj

8. Garanti ak sipò

For warranty information or technical support regarding your XUNATALED LED Strip Lights Kit, please contact XUNATA customer service through the retailer where the product was purchased or visit the official XUNATA websit pou detay kontak.

Tanpri konsève resi acha ou a kòm prèv acha pou nenpòt reklamasyon garanti.