OSRAM HMI DIGITAL 1200 W Lamp Manyèl Enstriksyon

1. Entwodiksyon

This instruction manual provides essential information for the safe and effective use of your OSRAM HMI DIGITAL 1200 W metal halide lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. This lamp is designed for professional applications in studio, stage, and television lighting.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: HMI lamps operate under high internal pressure and produce intense UV radiation and high luminance. Failure to follow safety guidelines can result in serious injury or property damage.

• Always operate this lamp exclusively in enclosed lamp casings specifically designed for HMI lamps.
• Asire lamp casing provides adequate UV protection.
• Pa manyen lamp with bare hands. Oils from skin can cause hot spots and reduce lamp life. Use clean gloves during handling.
• Pèmèt lamp to cool completely before handling or attempting replacement.
• Nan evènman an nan lamp breakage, mercury may be released. Follow local regulations for cleanup and disposal. Avoid direct contact with broken lamp pati.
• Se sèlman pèsonèl kalifye ki ta dwe fè enstalasyon ak antretyen.
• Ensure the power supply matches the lamp's nominal voltage ak wattage.

3. Pwodwi souview

Figi 1: OSRAM HMI DIGITAL 1200 W Lamp. This image displays the OSRAM HMI DIGITAL 1200 W lamp. It features a clear glass envelope revealing the internal arc tube and electrodes, mounted on an orange ceramic G38 base with two metal pins for electrical connection. The base is labeled with 'OSRAM HMI DIGITAL 1200W' and 'MADE IN CZECH REPUBLIC'.

3.1 Karakteristik kle

• High Color Rendering Index (CRI) of >90 for accurate color reproduction.
• UV-Stop (UVS) technology to minimize harmful UV emissions.
• Color temperature of approximately 6,000 K, simulating natural daylight.
• Extremely high luminous efficacy of up to 100 lumens per watt.
• Hot restart capability for quick re-ignition after a brief power interruption.
• Robust stem construction to enhance durability during transport and handling.
• Round moly-foil construction for even heat and current distribution, extending lamp lonjevite.
• Dimmable functionality for flexible light output control.

3.2 Espesifikasyon teknik

4. Enstalasyon ak Enstalasyon

Enpòtan: Installation must be performed by a qualified technician in accordance with all local electrical codes and safety regulations. Ensure the power is disconnected before beginning installation.

1. Preparasyon: Ensure the fixture is compatible with a G38 base HMI lamp and rated for 1200 W. Verify the fixture is clean and free of debris.
2. Manyen L laamp: Wear clean, lint-free gloves when handling the lamp. Avoid touching the glass envelope directly, as skin oils can cause damage.
3. Ensèsyon: Carefully align the G38 base pins with the corresponding sockets in the fixture. Insert the lamp firmly but gently until it is fully seated. Do not force the lamp nan priz la.
4. Sekirize aparèy la: Close and secure the lamp casing according to the fixture manufacturer's instructions. Ensure all safety interlocks are engaged.
5. Koneksyon pouvwa: Connect the fixture to the appropriate power supply (100 V, 12 A) via a suitable ballast. Ensure all electrical connections are secure.
6. Tcheke inisyal: Before full operation, perform a brief test to ensure the lamp ignites correctly and operates without unusual flickering or noise.

5. Operasyon Enstriksyon

Yon fwa ke lamp is correctly installed in a compatible fixture and connected to a suitable ballast, follow these steps for operation:

1. Pouvwa sou: Activate the power supply to the ballast. The lamp should ignite within a few seconds.
2. Peryòd chofe: HMI lamps require a short warm-up period (typically 1-5 minutes) to reach full brightness and stable color temperature.
3. Dimming: If your ballast and fixture support dimming, adjust the light output as required. Refer to your ballast's manual for specific dimming procedures.
4. Hot Restart: Sa a lamp supports hot restart. If power is briefly interrupted, the lamp can re-ignite without a significant cooling period. However, frequent hot restarts can reduce lamp lavi.
5. Pouvwa Off: Pou fèmen lamp, deactivate the power supply to the ballast. Allow the lamp to cool down before any handling.

6. Antretyen

Regular maintenance ensures optimal performance and extends the lifespan of your OSRAM HMI DIGITAL 1200 W lamp.

• Netwayaj: Periodically clean the exterior of the lamp and the fixture's reflector/lens with a soft, dry, lint-free cloth. Ensure the lamp is cool and power is disconnected before cleaning. Do not use abrasive cleaners.
• Enspeksyon: Regilyèman enspekte lamp for any signs of damage, such as cracks in the glass envelope or discoloration. Check the base for secure connection and signs of wear.
• Lamp Ranplasman: Ranplase lamp when it reaches its rated lifespan (1,000 hours) or if its performance degrades significantly (e.g., reduced brightness, color shift, frequent flickering). Always use genuine OSRAM replacement lamps.
• Dispozisyon: Due to mercury content, dispose of spent or broken lamps according to local environmental regulations. Do not dispose of with general household waste.

NAN. Depanaj

If troubleshooting steps do not resolve the issue, contact OSRAM customer support or a qualified service technician.

8. Garanti ak sipò

For information regarding the warranty terms and conditions for your OSRAM HMI DIGITAL 1200 W lamp, please refer to the documentation provided at the time of purchase or visit the official OSRAM website. For technical support, replacement parts, or service inquiries, please contact OSRAM customer service through their official channels.

Ou ka jwenn plis enfòmasyon ak enfòmasyon pou kontakte yo sou OSRAM Store on Amazon.