Entwodiksyon
The Alto Professional TS310 is a 2000-watt 10-inch 2-way powered PA speaker designed for professional audio applications. This manual provides essential information for the safe and effective use of your TS310 speaker, covering setup, operation, maintenance, and troubleshooting.
The TS310 features a powerful 2000-watt peak (1000-watt continuous) amplifier, a 10-inch low-frequency driver, and a 1.4-inch horn-loaded high-frequency driver with a precision waveguide. It includes an integrated 2-channel mixer, comprehensive contour control, and various positioning options for versatile deployment.
Figure 1: Alto Professional TS310 Powered PA Speaker, front view.
Enfòmasyon sou Sekirite
Before operating your TS310 speaker, please read and understand all safety instructions. Retain this manual for future reference.
- Sekirite elektrik: Always connect the speaker to a grounded power outlet. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Kòd pouvwa: Pwoteje kòd elektrik la pou yo pa mache oswa kwense, sitou nan priz, resipyan konvenyans, ak pwen kote yo sòti nan aparèy la.
- Dlo ak imidite: Pa sèvi ak aparèy sa a toupre dlo. Pa kite l degoute oswa voye dlo sou li.
- Chalè: Pa enstale tou pre okenn sous chalè tankou radyatè, rejis chalè, recho, oswa lòt aparèy (tankou amplifiers) ki pwodui chalè.
- Vantilasyon: Asire bon vantilasyon. Pa bloke okenn ouvèti vantilasyon.
- Sèvis: Refere tout sèvis yo bay pèsonèl sèvis kalifye. Reparasyon nesesè lè aparèy la domaje nenpòt fason, tankou kòd kouran oswa ploge domaje, likid koule oswa objè tonbe nan aparèy la, aparèy la te ekspoze a lapli oswa imidite, li pa fonksyone nòmalman. , oswa li te tonbe.
- Netwayaj: Netwaye sèlman ak yon twal sèk.
Karakteristik
The Alto Professional TS310 is engineered with advanced features for superior audio performance and versatility:
- Segondè pwodiksyon pouvwa: 2000W peak (1300W LF + 700W HF) active PA speaker with precision crossover and high-efficiency Class D amplifikatè.
- Optimized Drivers: Features a 10-inch (305 mm) LF driver with a 2.5-inch (76 mm) high-temperature voice coil and a 1.4-inch (35 mm) neodymium magnet HF driver with a precision waveguide.
- Mixer entegre: A 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls.
- Koneksyon fleksib: Includes an XLR Link output for connecting additional speakers.
- Sound Shaping: Equipped with a Contour EQ switch for quick sound adjustments and a Ground-Lift switch to eliminate hum.
- Montaj versatile: Lightweight cabinet design supports pole-mounting, wedge monitor positioning, bracket installation, or flown application with M6 suspension points.
Figure 2: Illustration of the 10-inch LF driver and 1.4-inch HF driver components.
Enstalasyon
Proper setup ensures optimal performance and safety of your TS310 speaker.
1. Plasman fizik
The TS310 offers multiple placement options:
- Poto-monte: Use a standard speaker pole stand. Ensure the stand is stable and rated for the speaker's weight.
- Wedge Monitor: Position the speaker on its side for use as a floor monitor.
- Enstalasyon bracket: Utilize M6 suspension points for fixed installations with appropriate brackets (sold separately).
- Flown Application: For suspended installations, consult a qualified professional to ensure safe rigging.
Figure 3: Various setup configurations including pole-mount, wedge monitor, and bracket installation.
2. Koneksyon
Refer to the rear panel diagram for connection points:
Figure 4: Rear panel controls and connections of the TS310.
- Koneksyon pouvwa: Connect the supplied power cable to the AC input on the rear panel and then to a grounded power outlet.
- Audio Inputs (Input 1 & Input 2): Use XLR or 1/4-inch TRS cables to connect your audio sources (e.g., mixer, microphone, instrument) to the dual combo inputs.
- XLR Link Output: Use an XLR cable to connect this output to the input of another powered speaker (e.g., another TS310) to expand your PA system.
Opere
Follow these steps for basic operation of your TS310 speaker:
- Pouvwa sou: Ensure all connections are secure. Turn on your audio sources first, then turn on the TS310 using the Power switch on the rear panel.
- Kontwòl Volim: Adjust the independent Level controls for Input 1 and Input 2 to set the desired volume for each source. Start with lower volumes and gradually increase.
- Contour EQ Switch: Engage this switch to apply a pre-set EQ curve that enhances bass and treble, often suitable for music playback. Disengage for a flatter frequency response, typically preferred for live vocals or instruments requiring precise mixing.
- Chanjman pou leve tè a: If you experience hum or buzzing, try engaging the Ground-Lift switch. This can help eliminate ground loop noise.
- Pouvwa Off: Before disconnecting power, turn off the TS310 first, then turn off your audio sources.
Antretyen
Regular maintenance helps prolong the life of your TS310 speaker:
- Netwayaj: Use a soft, dry cloth to clean the exterior of the speaker. Do not use solvents or abrasive cleaners.
- Grille: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
- Depo: When not in use, store the speaker in a dry, temperate environment, protected from dust and extreme temperatures.
- Enspeksyon: Regularly inspect power cables and audio cables for any signs of damage. Replace damaged cables immediately.
Depanaj
Si ou rankontre pwoblèm ak TS310 ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa | Power cable disconnected; Power outlet not active; Power switch off. | Ensure power cable is securely connected. Check power outlet with another device. Verify power switch is in the 'ON' position. |
| Pa gen son | Input level too low; Audio source not sending signal; Damaged audio cable; Mixer output level too low. | Increase Input Level controls. Check audio source. Test with a different audio cable. Ensure mixer/source output is active. |
| Son defòme | Input level too high (clipping); Speaker volume too high; Damaged driver. | Reduce Input Level controls. Lower the overall volume. If distortion persists at low volumes, contact support. |
| Bri ronfleman oswa vrombissement | Ground loop; Interference from other electronics. | Engage the Ground-Lift switch. Try connecting the speaker to a different power circuit. Move speaker away from other electronic devices. |
Espesifikasyon
Detailed technical specifications for the Alto Professional TS310:
- Modèl: TS310
- Sorti pouvwa: 2000 Watts Peak (1300W LF + 700W HF)
- LF chofè: 10-inch (305 mm), 2.5-inch (76 mm) high-temperature voice coil
- HF chofè: 1.4-inch (35 mm) neodymium magnet with precision waveguide
- Repons frekans: 1 KHz (Note: This value typically represents a specific test point or a simplified representation, not the full frequency range.)
- Entran Audio: 2 x XLR / 1/4-inch TRS combo inputs
- Sòti odyo: 1 x XLR Link output
- Kontwòl: Volume 1, Volume 2, Power switch, Contour EQ switch, Ground-Lift switch
- Montaj: Pole-mountable, wedge monitor, bracket installation, M6 suspension points
- Dimansyon (L x W x H): 20.6 x 11.8 x 12.6 pous (52.3 x 30.0 x 32.0 cm)
- Pwa atik: 26.4 liv (11.98 kg)
- Sous pouvwa: Fil elektrik
- Koulè: Nwa
- Manifakti: inMusic Brands Inc
- UPC: 816311011754
Garanti ak sipò
For detailed warranty information, please refer to the Safety & Warranty Manual included with your product. For technical support or service inquiries, please visit the official Alto Professional websit oswa kontakte depatman sèvis kliyan yo.
An electronic version of the user manual can be found isit la.
