Manyèl Enstriksyon Ponp Men Seamax SUP

1. Pwodwi souview

The Seamax SUP Hand Pump is designed for efficient and fast inflation of inflatable paddle boards, boats, and similar items. It features a robust design for durability and ease of use, allowing users to achieve high pressures up to 27 PSI (1.8 BAR).

Figure 1: Seamax SUP Hand Pump, showing the main pump body, hose, and integrated pressure gauge.

2. Karakteristik kle

• Kapasite segondè presyon: Achieves up to 27.5 PSI (1.8 BAR) for firm inflation.
• Ponpe efikas: Fast action design with a capacity of 2200 cubic cm for quick inflation.
• Integrated Pressure Gauge: Built-in gauge for accurate pressure monitoring during inflation.
• Konstriksyon dirab: Features a long-lasting aluminum inflator shaft and durable ABS housing.
• Sand Protection Filter: Enhances longevity of the inflator chamber by preventing sand ingress.
• Konpatibilite versatile: Includes a 4.5ft air hose with an HR adapter suitable for Halkey Roberts, Bravo, and similar air valves.
• Konsepsyon ergonomique: Comfortable handle for ease of use during pumping.

Figi 2: Detaye view of the pump highlighting its key components and features.

3. Pake kontni

Tanpri verifye ke tout atik yo prezan nan pakè a:

• 1 x Seamax SUP Hand Pump Unit
• 1 x 4.5ft Air Hose with HR Adapter

4. Enstalasyon

Follow these steps to set up your Seamax SUP Hand Pump:

1. Konekte tiyo lè a: Locate the air hose and the connection port on the pump. Screw the end of the air hose securely onto the pump's outlet port. Ensure it is tightened to prevent air leaks.
2. Prepare adaptè a: The other end of the hose features an HR adapter. This adapter is designed to fit Halkey Roberts, Bravo, and similar types of air valves commonly found on inflatable paddle boards and boats.

Figure 3: Securely attaching the air hose to the pump unit.

Figure 4: The HR adapter for connecting to inflatable valves.

5. Operasyon Enstriksyon

To inflate your paddle board or boat:

1. Connect to Inflatable: Insert the HR adapter firmly into the air valve of your inflatable item. Twist or secure it according to your inflatable's valve type to ensure a tight seal.
2. Kòmanse ponpe: Place your feet on the pump's footrests for stability. Grip the handle firmly and begin pushing down and pulling up the pump handle in a steady, rhythmic motion.
3. Kontwole presyon: Observe the built-in air pressure gauge located on the top of the pump handle. Continue pumping until the desired PSI (Pounds per Square Inch) or BAR (Barometric Pressure) is reached, as specified by your inflatable's manufacturer. The maximum pressure for this pump is 27.5 PSI.
4. Dekonekte: Once the desired pressure is achieved, quickly disconnect the adapter from the inflatable's valve.

Figure 5: Proper technique for using the hand pump to inflate a paddle board.

Figure 6: Monitoring the integrated pressure gauge during inflation.

6. Antretyen

To ensure the longevity and optimal performance of your Seamax SUP Hand Pump:

• Netwayaj: After each use, especially in sandy or dusty environments, wipe down the pump body and hose with a damp twal pou retire nenpòt pousyè tè oswa debri.
• Depo: Store the pump in a clean, dry place away from direct sunlight and extreme temperatures. Ensure the hose is not kinked during storage.
• Sand Protection Filter: Periodically check the sand protection filter for any blockages and clean if necessary to maintain efficient airflow.
• Lubrifikasyon: The internal components are designed for long-lasting performance. Avoid disassembling the pump for lubrication unless specifically instructed by the manufacturer.

NAN. Depanaj

If you encounter issues with your pump, consider the following:

• Pump Not Inflating:
  • Ensure the hose is securely attached to both the pump and the inflatable's valve.
  • Check the inflatable's valve for proper closure and any obstructions.
  • Verify that the pump's internal components are moving freely and not obstructed by debris.
• Pressure Gauge Not Reading:
  • Ensure the inflatable is connected and sealed properly. The gauge typically only registers pressure once a certain level of resistance is met within the inflatable.
  • If the gauge remains unresponsive, it may indicate a fault with the gauge itself. Contact customer support for assistance.
• Air Leaking from Connections:
  • Tighten all connections, including the hose to the pump and the adapter to the valve.
  • Inspect O-rings and seals for damage or wear. Replace if necessary.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information or technical support, please contact Seamax Marine directly through their official website or the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.

Pou plis resous ak enfòmasyon sou pwodwi yo, vizite Seamax Brand Store on Amazon.