Nova Replacement Seat Instruction Manual

1. Pwodwi souview

This document provides instructions for the proper installation and maintenance of the Nova Replacement Seat. This seat is designed specifically for Nova Cruiser II and GetGo Standard Rolling Walkers, ensuring a compatible and secure fit for the specified models.

The replacement seat restores the functionality of your rolling walker, providing a comfortable and stable resting surface when needed. Regular inspection and proper installation are crucial for user safety and product longevity.

Figi 1: Top view of the Nova Replacement Seat. This image shows the black seat with a central handle cutout, designed for easy lifting and carrying.

2. Pake kontni

• One (1) Nova Replacement Seat
• Note: Mounting hardware (screws, bolts, nuts) may or may not be included. It is recommended to retain the existing hardware from your original seat for installation.

3. Enstriksyon Enstalasyon

Follow these steps to replace the seat on your Nova Cruiser II or GetGo Standard Rolling Walker. Ensure the walker is stable and on a flat surface before beginning the installation process.

1. Prepare the Walker: Ensure the rolling walker is in a locked position (brakes engaged) to prevent movement during installation.
2. Remove the Old Seat: Carefully locate and remove the screws or bolts that secure the existing seat to the walker frame. Keep all hardware in a safe place, as it may be needed for the new seat.
3. Position the New Seat: Place the new Nova Replacement Seat onto the walker frame, aligning the pre-drilled holes on the underside of the seat with the mounting points on the walker frame.
4. Secure the New Seat: Using the original hardware (or new hardware if provided and compatible), insert the screws or bolts through the seat's mounting holes and into the walker frame. Tighten all fasteners securely, but do not overtighten, to avoid damaging the seat or frame.
5. Verifye estabilite: After installation, gently test the seat's stability by applying light pressure. Ensure it is firmly attached and does not wobble.

Figi 2: Anba view of the Nova Replacement Seat. This image highlights the pre-drilled holes for attaching the seat to the walker frame.

4. Itilizasyon

The Nova Replacement Seat is intended to provide a temporary resting surface for users of the Nova Cruiser II and GetGo Standard Rolling Walkers. Always ensure the walker's brakes are engaged before sitting on the seat. Do not use the seat for purposes other than its intended design.

5. Antretyen

• Netwayaj: Clean the seat surface regularly with a damp cloth and mild soap. Avoid abrasive cleaners or solvents, as these may damage the material.
• Enspeksyon: Periodically inspect the seat and its mounting hardware for any signs of wear, damage, or looseness. Ensure all screws and bolts remain tight.
• Depo: Store the walker and seat in a dry, cool place away from direct sunlight and extreme temperatures to prolong its lifespan.

NAN. Depanaj

• Syèj la santi l lach apre enstalasyon an: Re-check all mounting hardware. Ensure screws/bolts are fully tightened. If the issue persists, inspect the walker frame for any damage or wear at the mounting points.
• Seat does not align with walker frame: Verify that the replacement seat is compatible with your specific Nova Cruiser II or GetGo Standard Rolling Walker model (4212, 4208, 4203, 4201, or 4200).

7. Espesifikasyon

8. Garanti ak sipò

For warranty information, technical support, or to inquire about other replacement parts, please contact NOVA Medical Products directly. You can find more information and contact details by visiting the official Nova Store.

Visit the Nova Store on Amazon