Entwodiksyon
This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO Outdoor Wall Light, Model 203029A. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Enfòmasyon sou Sekirite
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.
- Enstalasyon an dwe fèt pa yon elektrisyen kalifye oswa yon moun ki gen eksperyans nan elektrisite.
- Ensure the electrical supply is suitable for the fixture.
- Toujou swiv kòd ak òdonans elektrik lokal yo.
- Pa enstale tou pre materyèl ki ka pran dife.
- This product is designed for outdoor use and is water-resistant.
- Tanpri tcheke lwa lokal ou yo anvan ou achteasing and installing this product.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an.
- EGLO Outdoor Wall Light Fixture (Model 203029A)
- Materyèl pou monte (vis, nwa fil)
- Manyèl Enstriksyon (dokiman sa a)
Remak: Anpoul la pa enkli.
Enstalasyon ak Enstalasyon
Follow these steps for proper installation of your EGLO Outdoor Wall Light.
- Prepare pou enstalasyon:
Turn off power at the circuit breaker or fuse box to avoid electrical shock. Ensure the power is completely off before proceeding.
- Enstalasyon Support Mounting:
Attach the mounting bracket to the junction box using the provided screws. Ensure the bracket is securely fastened and level.
- Koneksyon fil elektrik:
Connect the electrical wires according to standard wiring practices:
- Konekte a nwa fil soti nan aparèy la rive nan la nwa (live) wire from the junction box.
- Konekte a blan fil soti nan aparèy la rive nan la blan (neutral) wire from the junction box.
- Konekte a vèt oswa fil kwiv toutouni (tè) ki soti nan aparèy la rive nan vèt or bare copper (ground) wire from the junction box.
Secure all connections with wire nuts and ensure no bare wire is exposed.
- Montaj aparèy:
Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure a tight seal against the mounting surface to prevent water intrusion.

Image: Product dimensions for installation planning. The light measures 5.37 inches in length, 5.23 inches in width, and 12.01 inches in height.
- Enstale anpoul la:
Insert one A19 medium base bulb (not included) into the socket. Do not exceed the maximum wattage nan 60 wat.
- Retabli pouvwa:
Once installation is complete, restore power at the circuit breaker or fuse box and test the light fixture.

Image: EGLO Outdoor Wall Light installed on a contemporary home, showcasing its appearance in an outdoor setting.
Enstriksyon Operasyon
The EGLO Outdoor Wall Light operates via your home's standard electrical switch. Once installed and powered, the light will turn on and off with the connected wall switch.
- Sous limyè: Uses one A19 medium base bulb (E26 socket).
- Maksimòm Wattage: Pa depase 60 wat.
- Sous pouvwa: Corded Electric, 120 Volts.
Antretyen
Regular maintenance ensures the longevity and optimal performance of your wall light.
- Netwayaj:
Before cleaning, ensure the power is turned off at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass. Dry thoroughly after cleaning.
- Ranplasman anpoul:
Turn off power at the circuit breaker before replacing the bulb. Allow the old bulb to cool completely before removing. Unscrew the old bulb and screw in a new A19 medium base bulb, ensuring it does not exceed 60 watts. Restore power after replacement.
- Enspeksyon:
Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy domaj, koneksyon ki lach, oswa itilizasyon. Si ou jwenn nenpòt pwoblèm, dekonekte kouran an epi konsilte yon elektrisyen kalifye.
Depanaj
If your EGLO Outdoor Wall Light is not functioning correctly, refer to the following common issues and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Limyè flickers. |
|
|
| Dlo andedan aparèy la. |
|
|
Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, kontakte sèvis kliyan.
Espesifikasyon
| Mak: | EGLO |
| Non modèl: | 203029A |
| Fini: | Bwonz lwil oliv-fwote |
| Materyèl lonbraj: | Vè (Klè) |
| Materyèl: | Steel / vè |
| Dimansyon pwodwi (L x W x H): | 5.37" x 5.23" x 12.01" |
| Pwa atik: | 5.51 liv |
| Itilizasyon anndan/deyò: | Deyò |
| Sous pouvwa: | Fil elektrik |
| Voltage: | 120 Volts |
| Kalite sous limyè: | A19 |
| Lamp Kalite: | A19 Medium Base (E26) |
| Wattage: | 60 wat (Maksimòm) |
| Kantite sous limyè: | 1 |
| Kalite enstalasyon: | Sifas mòn |
| Nivo rezistans dlo: | Dlo rezistan |
| Asanble obligatwa: | Wi |
Garanti ak sipò
Enfòmasyon sou garanti:
All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all of the items and conditions identified in the original manufacturer's warranty.
Items specifically not covered by the warranty include loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Sipò Kliyan:
For technical assistance, warranty claims, or replacement parts, please contact EGLO customer support. Refer to your purchase documentation for specific contact details or visit the official EGLO websit.
When contacting support, please have your model number (203029A) and proof of purchase readily available.





