Entwodiksyon
This manual provides instructions for the Amazon Basics 4K HDMI 5 Port Switch. This device allows you to connect up to five HDMI source devices to a single HDMI display, such as a TV or monitor, and switch between them easily. It supports 4K resolution at 30Hz and is HDCP compliant.
Enfòmasyon sou Sekirite
- Pa ekspoze aparèy la nan imidite oswa tanperati ekstrèm.
- Pa demonte aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
- Use only the provided USB power cable.
- Asire bon vantilasyon alantou aparèy la.
Kontni pake
- Amazon Basics 4K HDMI 5 Port Switch
- USB Power Cable (power only)
- Remote Control (CR2025 battery not included)
- Manyèl itilizatè
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Pwodwi souview
The Amazon Basics 4K HDMI 5 Port Switch features five HDMI input ports and one HDMI output port. It includes a power input, an IR receiver for the remote control, and a manual selection button.
Imaj: Yon imaj anwo-anba view of the HDMI switch, highlighting the five HDMI input ports (INPUT1-INPUT5), one HDMI output port, and the DC 5V power input.
Front Panel
- Pouvwa ki ap dirije: Endike estati pouvwa.
- INPUT LEDs (1-5): Indicate the currently selected input port.
- SELECTION Button: Press to manually cycle through input sources.
- IR Reseptè: Pou siyal kontwòl remote.
Panèl dèyè
- HDMI INPUT (1-5): Connect your HDMI source devices (e.g., game console, Blu-ray player, computer).
- SOTI HDMI: Connect to your HDMI display (e.g., TV, monitor, projector).
- DC 5V: Pò D 'pouvwa.
Enstalasyon
- Konekte Aparèy Sous HDMI yo: Plug up to five HDMI source devices (e.g., gaming consoles, media players, computers) into the HDMI INPUT ports (1-5) on the switch.
- Konekte ak Display: Connect an HDMI cable from the HDMI OUTPUT port on the switch to an HDMI input port on your TV, monitor, or projector.
- Konekte pouvwa: Plug the included USB power cable into the DC 5V port on the switch and connect the other end to a USB power source (e.g., a USB port on your TV or a USB wall adapter). The POWER LED on the switch will illuminate.
- Mete Batri Remote: Louvri konpatiman pil kontwòl remote la epi mete yon pil CR2025 (pa enkli), asire w polarite kòrèk la.
Image: The HDMI switch connected to a laptop via an HDMI cable, demonstrating a typical setup.
Enstriksyon Operasyon
Chanje Antre
You can switch between connected HDMI sources using either the manual selection button on the device or the included remote control.
- Manyèl Chanje: Press the "SELECTION" button on the front panel of the switch to cycle through the HDMI input ports (1-5). The corresponding INPUT LED will light up to indicate the active source.
- Chanje kontwòl remote: Point the remote control towards the IR receiver on the front of the switch. Press the numbered buttons (1-5) on the remote to directly select the desired HDMI input port.
The switch does not feature automatic input sensing or switching. You must manually select the desired input.
Antretyen
- Netwaye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
- Kenbe aparèy la pwòp de pousyè ak debri pou asire yon bon vantilasyon.
- Sere aparèy la nan yon kote ki fre, sèk lè li pa itilize.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen siyal sou ekran an. | Move opinyon chwazi. Kab HDMI ki lach. Pa gen kouran nan switch la. Source device not active. | Ensure the correct input is selected on the switch and your display. Check all HDMI cable connections. Verify the USB power cable is connected and the POWER LED is on. Asire w ke aparèy sous la limen epi li ap bay yon siyal. |
| Picture flickering or poor quality. | Kab HDMI ki gen pwoblèm. Cable length too long. Resolution incompatibility. | Eseye yon lòt kab HDMI. Ensure HDMI cables are within recommended length (e.g., under 10 ft for 4K). Verify your display and source device support the output resolution (e.g., 4K). |
| Remote kontwòl pa travay. | No battery or dead battery. Obstruction to IR receiver. Incorrect remote aim. | Insert a new CR2025 battery with correct polarity. Ensure a clear line of sight between the remote and the switch's IR receiver. Aim the remote directly at the IR receiver. |
Espesifikasyon
- Dimansyon pwodwi: 6.46 x 0.79 x 2.16 pous
- Pwa atik: 11.4 ons
- Nimewo Modèl: AZSW5T1A-4K2K
- Kalite konektè: HDMI
- Pò Antre: 5 x HDMI
- Pò Sòti: 1 x HDMI
- Sipò pou rezolisyon: Jiska 4K @ 30Hz
- Konfòmite HDCP: HDCP 1.4b
- Pouvwa: DC 5V (via kab USB)
- Aparèy konpatib: Computer, PS4, Xbox, Blu-ray DVD player, STB, Projectors, HDTVs, Apple TV, monitors, etc.
Garanti ak sipò
Pou enfòmasyon sou garanti a oswa sipò teknik, tanpri al gade paj ofisyèl Amazon Basics la. website or contact Amazon customer service. Keep your purchase receipt for warranty claims.
