Hotone Nano Legacy Floor Series Mojo Attack User Manual

1. Entwodiksyon

The Hotone Nano Legacy Floor Series Mojo Attack is a compact, dual-channel, 75-watt floor guitar amplifier designed for portability and versatile tone. It integrates the sound characteristics of two iconic amplifiers: the Hotone Mojo Diamond (inspired by the Fender Tweed) and the Hotone Heart Attack (inspired by the Mesa/Boogie Rectifier). This unit is ideal for musicians seeking powerful, high-quality guitar tones in a convenient, pedalboard-friendly format.

2. Karakteristik kle

• Portable 75-watt, dual-channel floor guitar amplifier.
• Channel A (CH A): Hotone Mojo Diamond, delivering tones inspired by the legendary Fender Tweed amplifier.
• Channel B (CH B): Hotone Heart Attack, providing tones inspired by the legendary Mesa/Boogie Rectifier amplifier.
• Independent Volume, Gain, and 3-band EQ (Bass, Middle, Treble) controls for each channel.
• Integrated Boost function for adding up to +12dB of clean volume.
• Built-in Reverb effect with natural decay.
• FX Loop for integrating external effects pedals.
• Single Speaker Output for use with 4, 8, or 16-ohm cabinets.
• Includes an 18–20 V DC power supply.

3. Kontwòl ak Koneksyon

3.1 Kontwòl Panel Front

This image displays the top panel of the Mojo Attack, highlighting the control knobs for each channel and the footswitches.

• CH A / Mojo Diamond Controls:
• BASS: Adjusts the low-frequency response for Channel A.
• MWAYEN: Adjusts the mid-frequency response for Channel A.
• TREBLE: Adjusts the high-frequency response for Channel A.
• GAY: Controls the amount of overdrive/distortion for Channel A.
• VOL: Sets the output volume level for Channel A.
• CH B / Heart Attack Controls:
• BASS: Adjusts the low-frequency response for Channel B.
• MWAYEN: Adjusts the mid-frequency response for Channel B.
• TREBLE: Adjusts the high-frequency response for Channel B.
• GAY: Controls the amount of overdrive/distortion for Channel B.
• VOL: Sets the output volume level for Channel B.
• Bouton REVERB: Adjusts the intensity of the built-in reverb effect.
• Footswitch REVERB: Activates or deactivates the reverb effect.
• CH A/B Footswitch: Toggles between Channel A (Mojo Diamond) and Channel B (Heart Attack).
• BOOST Footswitch: Engages or disengages the +12dB clean volume boost.

3.2 Koneksyon Panèl Dèyè

This image shows the rear panel of the Mojo Attack, detailing all available input and output connections.

• FX LOOP (SEND/RETURN): 1/4-inch jacks for connecting external effects pedals. Connect the 'SEND' to the input of your effect and the output of your effect to the 'RETURN'.
• DC 18-20V: Power input jack for connecting the included power adapter.
• POUVWA ON / OFF: Chanjman prensipal pouvwa pou inite a.
• SPEAKER OUTPUT (4-16 OHMS): 1/4-inch jack for connecting to a passive speaker cabinet. Ensure the cabinet's impedance matches the amplifier's output capabilities (4, 8, or 16 ohms).
• LINE OUTPUT (6.35mm Jack): 1/4-inch line out for connecting to mixers, audio interfaces, or other ampsistèm lifikasyon.
• SOTI XLR: Balanced XLR output for direct connection to a PA system or recording console.
• CAB SIM ON/OFF: Switch to enable or disable the cabinet simulation for the LINE and XLR outputs.

4. Enstalasyon

1. Koneksyon pouvwa: Connect the included 18-20V DC power adapter to the 'DC 18-20V' input on the rear panel. Plug the adapter into a suitable power outlet.
2. Koneksyon Gitar: Connect your guitar to the input jack on the front of the unit (not explicitly shown in images but standard for guitar amps).
3. Speaker Cabinet Connection: For direct amplification, connect a speaker cable from the 'SPEAKER OUTPUT' (4-16 OHMS) on the rear panel to your passive guitar speaker cabinet. Ensure the cabinet's impedance is within the supported range (4, 8, or 16 ohms).
4. Koneksyon dirèk (opsyonèl): For connecting to a mixer, audio interface, or PA system, use the 'LINE OUTPUT' (1/4-inch) or 'XLR OUTPUT' on the rear panel. You can engage or disengage the 'CAB SIM' switch based on your preference or the requirements of the connected device.
5. Effects Loop Connection (Optional): If using external effects, connect the 'SEND' jack to the input of your effect pedal and the output of your effect pedal to the 'RETURN' jack.

5. Operasyon Enstriksyon

1. Pouvwa sou: Ensure all connections are secure, then flip the 'POWER ON/OFF' switch on the rear panel to the 'ON' position.
2. Seleksyon chanèl: Use the 'CH A/B' footswitch to toggle between Channel A (Mojo Diamond) for classic Fender Tweed-inspired clean and mild overdrive tones, and Channel B (Heart Attack) for heavier Mesa/Boogie Rectifier-inspired high-gain sounds.
3. Ton fòm: Adjust the 'BASS', 'MIDDLE', and 'TREBLE' knobs for each channel independently to sculpt your desired tone.
4. Gain and Volume: Use the 'GAIN' knob to control the amount of drive/distortion and the 'VOL' knob to set the output level for each channel.
5. Fonksyon ranfòse: Press the 'BOOST' footswitch to activate a +12dB clean volume boost, useful for solos or emphasizing certain passages.
6. Efè reverb: Turn the 'REVERB' knob to adjust the intensity of the built-in reverb. Use the 'REVERB' footswitch to engage or disengage the effect.
7. Effects Loop Usage: If external effects are connected to the FX Loop, they will be active when the loop is engaged (always on, or controlled by external switch if applicable to your effects).

6. Antretyen

• Netwayaj: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes.
• Depo: Sere a ampSere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Manyen: Manyen aparèy la avèk prekosyon. Evite lage l oswa sibi gwo chòk.
• Vantilasyon: Ensure proper ventilation around the unit during operation to prevent overheating. Do not block any vents.
• Pwovizyon pou pouvwa: Always use the original or a compatible 18-20V DC power supply. Using an incorrect power supply can damage the unit and void the warranty.

NAN. Depanaj

• Pa gen son:
  • Check if the power adapter is securely connected and the unit is powered on.
  • Ensure your guitar cable is properly connected to the input.
  • Verify that the speaker cable is securely connected to the 'SPEAKER OUTPUT' and the speaker cabinet.
  • Check the volume knobs on both channels and your guitar.
  • If using the FX Loop, ensure all pedals are powered and connected correctly. Try bypassing the FX Loop to isolate the issue.
• Distorted/Unwanted Noise:
  • Reduce the 'GAIN' knob settings on both channels.
  • Tcheke pou wè si gen fil oswa koneksyon ki defektye.
  • Ensure the power supply is stable and free from interference.
  • If using the 'XLR OUTPUT' or 'LINE OUTPUT', try toggling the 'CAB SIM' switch.
• Footswitches Not Responding:
  • Asire w ke inite a limen.
  • If a footswitch feels stuck, gently try to free it. Avoid excessive force.

8. Espesifikasyon

9. Garanti ak sipò

For detailed warranty information and technical support, please refer to the official HOTONE website or contact your authorized HOTONE dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

HOTONE Official Websit: www.hotoneaudio.com