1. Entwodiksyon
The Moxa EDS-208A is an 8-port unmanaged Ethernet switch designed for industrial applications. It provides a reliable and cost-effective solution for extending your industrial Ethernet network. This manual provides essential information for the proper installation, operation, and maintenance of your EDS-208A switch.
Karakteristik kle:
- 8 x 10/100BaseT(X) RJ45 Ethernet ports
- Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
- IP30 aluminum housing for robust protection
- Rugged hardware design suitable for hazardous locations (Class 1 Div. 2/ATEX Zone 2)
- Certified for transportation (NEMA TS2/ EN 50121-4/e-Mark) and maritime environments (DNV/GL/LR/ABS/NK)
2. Enstalasyon
2.1 Kontni pake a:
Before installation, ensure the package contains the following items:
- Moxa EDS-208A Ethernet Switch
- Gid Enstalasyon Rapid
- Kat Garanti
If any of these items are missing or damaged, please contact your sales representative for assistance.
2.2 Enstalasyon fizik:
The EDS-208A is designed for DIN-rail mounting. Follow these steps for secure installation:
- Attach the DIN-rail mounting kit to the rear panel of the EDS-208A.
- Kwoke tèt klip ray DIN lan sou kwen anwo ray DIN an.
- Press the switch firmly against the DIN-rail until the clip snaps into place.
- Ensure the switch is securely fastened to prevent accidental dislodgement.
2.3 Koneksyon pouvwa:
The EDS-208A supports redundant dual power inputs for enhanced reliability. Connect power as follows:
- Locate the terminal block on the top of the switch.
- Connect your 12/24/48 VDC or 18 to 30 VAC power sources to the appropriate terminals. Refer to the markings on the terminal block for correct polarity and voltage.
- Ensure all power connections are secure to prevent intermittent operation.
2.4 Koneksyon Rezo:
Connect your network devices to the EDS-208A using standard RJ45 Ethernet cables.
- Plug one end of an Ethernet cable into an available RJ45 port on the EDS-208A.
- Plug the other end of the cable into your network device (e.g., PC, server, PLC).
- The EDS-208A automatically detects the speed and duplex mode of the connected device.
3. Operasyon
3.1 Unmanaged Switch Functionality:
The EDS-208A is an unmanaged switch, meaning it operates as a plug-and-play device without requiring any configuration. It automatically learns MAC addresses and forwards frames based on destination MAC addresses, providing seamless network connectivity.
3.2 Endikatè ki ap dirije:
The EDS-208A features LED indicators on the front panel to provide status information:
| Endikatè ki ap dirije | Estati | Deskripsyon |
|---|---|---|
| PWR1 / PWR2 | On | Power input 1 / Power input 2 is active. |
| PWR1 / PWR2 | Off | Power input 1 / Power input 2 is not active. |
| P1-P8 (Link/Act) | On | Port has a valid network link. |
| P1-P8 (Link/Act) | Flache | Port is actively transmitting or receiving data. |
| P1-P8 (Link/Act) | Off | No network link detected on the port. |
4. Antretyen
4.1 Netwayaj:
To ensure optimal performance and longevity of your EDS-208A, follow these cleaning guidelines:
- Dekonekte kouran anvan w netwaye.
- Sèvi ak yon twal mou epi sèk pou siye deyò switch la.
- Pa sèvi ak pwodui netwayaj likid oswa ayewosòl, paske yo ka domaje aparèy la.
- Ensure ventilation openings are free from dust and debris.
4.2 Konsiderasyon anviwònman:
The EDS-208A is designed for industrial environments. To maintain its performance, ensure it operates within the specified temperature and humidity ranges:
- Tanperati operasyon: -10 a 60 ° C (14 a 140 ° F)
- Tanperati Depo: -40 a 85 ° C (-40 a 185 ° F)
- Imidite relatif: 5 a 95% (ki pa kondanse)
NAN. Depanaj
This section provides solutions to common issues you might encounter with your EDS-208A switch.
- Pa gen pouvwa:
Check if the power cables are securely connected to the terminal block and the power source. Verify that the power source is supplying the correct voltage (12/24/48 VDC or 18-30 VAC). Check the PWR1/PWR2 LEDs. - Pa gen lyen sou pò a:
Ensure the Ethernet cable is properly connected to both the switch port and the network device. Verify that the connected device is powered on and functioning correctly. Try a different Ethernet cable or port. Check the Link/Act LED for the specific port. - Pèfòmans Rezo Ralanti:
Ensure all connected devices are operating at their optimal speed. Check for excessive network traffic or faulty cables. While the EDS-208A is unmanaged, network congestion can still impact performance. - Koneksyon tanzantan:
Check all cable connections for looseness. Ensure the power supply is stable and within the specified voltage range. Verify that the operating environment is within the specified temperature and humidity limits.
6. Espesifikasyon teknik
| Spesifikasyon | Detay |
|---|---|
| Modèl | EDS-208A |
| Mak | Moxa |
| Kantite pò | 8 |
| Kalite entèfas | RJ45 |
| Voltage Antre | 12/24/48 VDC, 18 to 30 VAC |
| Evalyasyon Tanperati Upper | 60°C (140°F) |
| Ka Materyèl | Aluminum (IP30 rated) |
| Pwa atik | 13.6 ons (0.39 kilogram) |
| Dimansyon pake | 8.3 x 6 x 3 pous |
| Dat Premye Disponib | 12 janvye 2018 |
| UPC | 613739924587 |
7. Garanti ak sipò teknik
Moxa products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa website. In most regions, Moxa provides a standard warranty period for its industrial networking products.
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Moxa's technical support team. Contact information can typically be found on the Moxa official websit la oubyen atravè distribitè lokal ou a.
When contacting support, please have your product model (EDS-208A) and serial number ready to expedite assistance.
