OSRAM Encelium SCP-1500 PIR Occupancy Sensor User Manual

1. Entwodiksyon

The OSRAM Encelium SCP-1500 is a 24V ceiling-mount Passive Infrared (PIR) occupancy sensor designed for efficient lighting control. This sensor detects motion within its coverage area, automatically controlling connected lighting or other systems to save energy. It features a 360-degree sensing angle and a maximum coverage range of 1500 feet, making it suitable for various commercial and industrial applications.

This manual provides detailed instructions for the installation, operation, and maintenance of your SCP-1500 sensor.

2. Enfòmasyon sou Sekirite

• Danje elektrik: Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik nasyonal ak lokal yo.
• Disconnect power at the circuit breaker or fuse before installing or servicing the sensor.
• Ensure the power supply is 24V as specified. Connecting to an incorrect voltage ka domaje aparèy la epi poze yon risk pou sekirite.
• Do not install in locations with excessive vibration, extreme temperatures, or high humidity.
• Aparèy sa a fèt pou itilize andedan kay la sèlman.

3. Pake kontni

Verifye ke tout bagay yo prezan anvan ou kòmanse enstalasyon an:

• OSRAM Encelium SCP-1500 PIR Occupancy Sensor Unit
• Materyèl pou monte (vis, lank)
• Manyèl Itilizatè (dokiman sa a)

4. Enstalasyon ak Enstalasyon

4.1 Konsiderasyon Pre-enstalasyon

• A 24 Volt power pack is required for operation (not included).
• The sensor is designed for ceiling mount installation. Choose a central location within the desired coverage area, free from obstructions.
• Avoid mounting near HVAC vents, windows, or other sources of rapid temperature changes, as these can cause false triggers.
• Ensure the mounting surface is stable and can support the sensor's weight.

4.2 Monte Capteur a

1. Dekonekte pouvwa: Before starting, ensure power to the installation area is turned off at the circuit breaker.
2. Chwazi Kote: Identify the optimal ceiling location for 360-degree coverage.
3. Prepare fil elektrik yo: Route the 24V low-voltage wiring from the power pack to the chosen mounting location.
4. Baz sekirite: Use the provided mounting hardware to securely attach the sensor's base to the ceiling.
5. Koneksyon fil elektrik: Connect the 24V power and control wires to the sensor terminals as per the wiring diagram provided with your power pack or system controller. Ensure correct polarity.
6. Attach Sensor Body: Once wiring is complete and secure, attach the main sensor body to the mounted base, typically by twisting or snapping it into place.
7. Retabli pouvwa: After installation is complete and all connections are secure, restore power to the circuit.

Figi 1: Top view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image shows the sensor's dome-shaped design with the central PIR lens, indicating its ceiling-mount orientation.

Figi 2: Side view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image highlights the low-profile design and the slight protrusion of the PIR lens from the main body.

5. Operasyon

The OSRAM Encelium SCP-1500 sensor operates using Passive Infrared (PIR) technology to detect changes in infrared radiation caused by human movement. When motion is detected within its 360-degree coverage area (up to 1500 feet), the sensor signals the connected lighting control system to activate or maintain lighting.

• Aktivasyon otomatik: Upon detecting occupancy, the sensor will signal the connected system to turn on lights or other controlled devices.
• Occupancy Hold: As long as occupancy is detected, the sensor will maintain the active state.
• Dezaktivasyon otomatik: After a period of no detected motion (determined by the connected control system's settings), the sensor will signal the system to turn off lights or devices.

Note: Specific delay times and sensitivity adjustments are typically configured through the connected Encelium lighting control system, not directly on the SCP-1500 sensor itself. Refer to your Encelium system documentation for configuration details.

6. Antretyen

• Netwayaj: Periodically clean the sensor lens with a soft, dry cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
• Enspeksyon: Regularly inspect the sensor for any physical damage or loose connections.
• Obstak: Asire w ke chan mayetik detèktè a view remains unobstructed by new fixtures, furniture, or other objects.

Toujou dekonekte kouran an anvan ou fè nenpòt antretyen.

NAN. Depanaj

If the problem persists after attempting these solutions, contact OSRAM technical support or a qualified electrician.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, please refer to the documentation provided with your purchase or visit the official OSRAM Encelium website. OSRAM provides technical support for its products.

If you require assistance with installation, troubleshooting, or have questions about your SCP-1500 sensor, please contact OSRAM customer support through their official channels.

OSRAM Official Websit: www.osram.com