1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine SPS-M601W 6.5-inch 2-Way Marine Coaxial Speakers. Designed for marine environments, these speakers offer high-quality audio performance and durability. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Enfòmasyon sou Sekirite
Observe the following safety precautions to prevent damage to the product or injury to yourself.
- Ekspozisyon dlo: While designed for marine use with IPX5 water resistance, avoid direct high-pressure water jets.
- Koneksyon pouvwa: Ensure all power connections are secure and correctly polarized to prevent electrical shorts or damage.
- Montaj: Mount speakers securely to prevent detachment during vessel movement.
- Nivo volim: Ekspozisyon pwolonje a nivo volim ki wo ka lakòz domaj nan tande.
- Enstalasyon pwofesyonèl: If you are unsure about any installation steps, consult a qualified marine audio technician.
3. Enstalasyon ak Enstalasyon
Proper installation is crucial for optimal performance and durability of your marine speakers. This section outlines the general steps for mounting and wiring.
3.1. Debalaj ak Enspeksyon
Carefully remove the speakers from their packaging. Inspect for any signs of damage during transit. Ensure all components are present:
- Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers
- Materyèl pou monte (vis, klip)
- Griyaj

Image 1: Four Alpine SPS-M601W speakers, illustrating the product's appearance with and without grilles.
3.2. Mounting Location Selection
Choose a mounting location that provides adequate space for the speaker's depth and allows for proper sound dispersion. Ensure the surface is flat and sturdy enough to support the speaker's weight. Consider areas protected from direct, continuous water submersion.

Imaj 2: Pwofesyonèl bò kotefile of an Alpine SPS-M601W speaker, highlighting its mounting depth and grille design.
3.3. Cutting the Mounting Hole
- Refer to the specifications section for the precise cutout diameter.
- Use a template (often included or available from Alpine) to mark the cutting area.
- Carefully cut the hole using an appropriate tool, ensuring clean edges.
3.4. Koneksyon fil elektrik
Connect the speaker wires to your marine audio amplifier or head unit. Observe correct polarity: positive (+) to positive and negative (-) to negative. Incorrect wiring can lead to phase issues and reduced sound quality.
- The speakers have a nominal impedance of 4 Ohms.
- Asire w amplifier is stable at a 4 Ohm load.

Imaj 3: Dèyè view of the speaker, detailing the wiring terminals and internal components for connection.
3.5. Securing the Speakers
- Place the speaker into the mounting hole.
- Align the mounting holes on the speaker frame with the pre-drilled holes on the mounting surface.
- Secure the speaker using the provided screws. Do not overtighten.
- Attach the grilles by aligning them with the speaker frame and pressing firmly until they click into place or securing with screws if applicable.

Image 4: Two Alpine SPS-M601W speakers with grilles, demonstrating the finished appearance after installation.
4. Operasyon
Once installed, your Alpine SPS-M601W speakers are ready for use. They are designed to integrate seamlessly with your existing marine audio system.
- Pouvwa sou: Turn on your marine head unit or amplifier.
- Sous odyo: Select your desired audio source (radio, Bluetooth, auxiliary input, etc.).
- Ajisteman Volim: Gradually increase the volume to a comfortable listening level. Avoid excessively high volumes to prevent distortion and potential speaker damage.
- Anviwònman son: Adjust bass, treble, and balance settings on your head unit or amplifier to optimize sound quality according to your preference and the acoustic environment of your vessel.

Imaj 5: Detaye view of the speaker cone and tweeter, illustrating the 2-way coaxial design.
5. Antretyen ak Swen
Regular maintenance ensures the longevity and optimal performance of your marine speakers.
- Netwayaj: Clean the speaker grilles and surrounds with a soft, damp twal. Evite pwodui netwayaj abrazif oswa solvan.
- Saltwater Exposure: After exposure to saltwater, rinse the speakers with fresh water to prevent salt buildup, which can corrode components.
- Pwoteksyon UV: The grilles are UV resistant (rated at ASTM D4329), but prolonged, extreme sun exposure can still affect appearance over time.
- Enspeksyon: Periodically check wiring connections for corrosion or looseness. Ensure mounting screws remain tight.
NAN. Depanaj
If you experience issues with your Alpine SPS-M601W speakers, refer to the following common problems and solutions:
- Pa gen son:
- Check all wiring connections for proper polarity and secure contact.
- Verifye a amplifier or head unit is powered on and functioning correctly.
- Ensure the audio source is active and volume is turned up.
- Son defòme:
- Diminye nivo volim nan sou inite tèt ou a oubyen amplifier.
- Tcheke pou koneksyon fil elektrik ki lach.
- Asire w la amplifier is not overdriven or clipping.
- Verify the impedance of the speakers matches the ampkapasite lifier yo.
- Son tanzantan:
- Inspect wiring for loose connections or corrosion.
- Check for any short circuits in the speaker wiring.
- Yon Oratè Pa Ap Travay:
- Swap the non-working speaker with a known working one to determine if the issue is with the speaker or the wiring/ampchanèl lifier.
- Check the balance settings on your head unit.
7. Espesifikasyon
Detailed technical specifications for the Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers.
| Karakteristik | Spesifikasyon |
|---|---|
| Non modèl | SPS M601W |
| Kalite Oratè | Woofer (Koaksyal) |
| Gwosè Oratè | 6.5 pous |
| Konfigirasyon chanèl son antoure | 2.0 |
| CTA-2031 Speaker Rating | 35W RMS, 110W Peak Power |
| Enpedans nominal | 4 Ohm |
| Repons Frekans | 50Hz - 20kHz |
| Sansiblite | 89 dB |
| Evalyasyon rezistans dlo | IPX5 |
| UV Rezistans | ASTM D4329 (Grilles) |
| Salt Spray/Fog Resistance | ASTM B117 |
| Dimansyon pwodwi | 3 x 3 x 3 inches (approximate, for a single speaker) |
| Pwa atik | 11.5 liv (pou seri 4 a) |
| UPC | 613815879367 |

Image 6: Rear label of the speaker, displaying the model number SPS-M601W and manufacturing information.
8. Garanti ak sipò
Pou enfòmasyon sou garanti a ak sipò teknik, tanpri al gade sit ofisyèl Alpine lan. website or contact Alpine customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Visit the official Alpine Store for more products and support: Magazen Alpine sou Amazon





