Audio System CO-600.5 High-Performance 5-Channel Class A/B AmpManyèl itilizatè lifier

1. Entwodiksyon

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before using the product and retain it for future reference.

2. Enfòmasyon sou Sekirite

General Product Safety according to EU Regulation 2023/2028:

• Observe the manufacturer's instructions and operating instructions for switching off the power supply to the vehicle and in the retrofit products.
• The supply line to the retrofit product must not be longer than 30cm from the operating battery.
• Fasten retrofit devices and accessories properly.
• It is recommended that the retrofit devices/accessories be installed by a specialist workshop. Otherwise, product or vehicle damage and fire can occur.

Always disconnect the vehicle's battery before performing any installation or maintenance work to prevent electrical shock or damage.

3. Pwodwi souview

The Audio System CO-600.5 is a high-performance 5-channel Class A/B amplifier designed for car audio systems. It features switchable High-Pass (HP) and Low-Pass (LP) filters, a full active mode, and includes a wired RTC remote control for convenient adjustments. The amplifier supports an input sensitivity range of 0.2V to 6V and includes a high-level RCA input with automatic turn-on capability.

Karakteristik kle:

• 5-Chanèl Klas A/B Amplifier
• Switchable High-Pass (HP) and Low-Pass (LP) Filters
• Full Active Mode
• Wired RTC Remote Control Included
• Input Sensitivity: 0.2V - 6V
• High-Level RCA Input with Auto-On
• Power Output: 4 x 60W RMS (4 Ohm) / 4 x 85W RMS (2 Ohm) and 1 x 250W RMS (4 Ohm mono) / 1 x 350W RMS (2 Ohm mono)

Pwodwi Views

Figi 3.1: Top view of the CO-600.5 amplifier, mete aksan sou konsepsyon elegant li yo ak mak li yo.

Figi 3.2: Devan view nan la amplifier, displaying the cooling fins.

Figi 3.3: Dèyè view nan la amplifier, detailing the power input (GND, REM, +12V) and speaker output terminals.

Figure 3.4: Input and control panel, featuring RCA inputs, gain level adjustments, and crossover frequency controls.

Figi 3.5: Angle view providing a comprehensive look at both connection sides of the amplifier.

4. Enstalasyon ak Enstalasyon

Bon enstalasyon enpòtan anpil pou pèfòmans ak lonjevite aparèy ou an. amplifier. It is highly recommended that installation be performed by a qualified professional.

4.1 Kote montaj

• Chwazi yon kote ki sèk, byen ayere, lwen limyè solèy dirèk ak sous chalè.
• Ensure sufficient airflow around the amplifter pou bon refwadisman.
• Monte la amplifier securely to a solid surface using appropriate hardware to prevent movement during vehicle operation.

4.2 Koneksyon fil elektrik

Anvan ou fè nenpòt koneksyon, dekonekte tèminal negatif batri machin nan.

• Pouvwa (BAT+): Konekte yon kab kouran ki gen fizyon dirèkteman soti nan tèminal pozitif batri machin nan nan tèminal +12V ki sou amplifier. Ensure the fuse is located within 30cm of the battery.
• Tè (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface on the vehicle chassis. The connection point must be free of rust and paint.
• Kontwòl a distans (REM): Konekte yon fil pou limen a distans ki soti nan pwodiksyon a distans inite prensipal ou a nan tèminal REM ki sou amplifier. This will turn the amplimen epi etenn lifan an ak inite prensipal ou a.
• Antre RCA: Connect your head unit's RCA outputs to the amplifier's RCA inputs (CH1/2, CH3/4, SUB IN).
• Rezilta Oratè: Connect your speakers to the corresponding speaker output terminals (CH1, CH2, CH3, CH4, SUBWOOFER). Observe correct polarity (+ to + and - to -).

5. Operasyon Enstriksyon

Yon fwa a amplifier is correctly installed and wired, you can proceed with initial setup and operation.

5.1 Premye pouvwa sou

• Rekonekte tèminal negatif batri machin nan.
• Limen inite prensipal ou a. amplifier should power on automatically via the remote wire. The power indicator LED on the amplifier should illuminate.

5.2 Ajisteman Nivo Pwofi

The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. This is not a volume control.

• Mete la amplifier's gain control to minimum (fully counter-clockwise).
• Mete volim inite prensipal ou a sou apeprè 75-80% nan maksimòm li.
• Dousman ogmante a ampKontwòl gen lifijè a jiskaske ou tande yon ti distòsyon, apresa bese l yon ti kras jiskaske son an klè.

5.3 Anviwònman kwazman (X-OVER)

The CO-600.5 features switchable HP (High-Pass) and LP (Low-Pass) filters for precise sound tuning.

• HPF (Filtè Pase-wo): Allows frequencies above the set point to pass through. Use for full-range speakers to prevent low frequencies that can cause distortion.
• LPF (Filtè Low-Pass): Allows frequencies below the set point to pass through. Use for subwoofers to prevent high frequencies.
• Adjust the crossover frequencies (e.g., 50Hz-250Hz for HPF, 30Hz-250Hz for LPF) according to your speaker specifications and listening preferences.

5.4 RTC Remote Control

The included wired RTC remote control allows for convenient adjustment of the subwoofer level from the driver's seat.

6. Antretyen

The Audio System CO-600.5 ampLifter mande pou minimòm antretyen.

• Kenbe la ampLimyè a pwòp epi san pousyè. Sèvi ak yon twal mou epi sèk pou netwaye.
• Asire w tout koneksyon yo rete byen fèm. Tcheke fil elektrik yo detanzantan pou wè si gen siy itilizasyon oswa korozyon.
• Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif sou amplifier.

NAN. Depanaj

Si ou fè eksperyans pwoblèm ak ou amplifier, gade pwoblèm ak solisyon komen sa yo:

If the problem persists after attempting these solutions, please contact Audio System customer support or a qualified car audio technician.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Audio System dealer. Warranty terms and conditions may vary by region and retailer.

For technical support, service, or inquiries regarding spare parts, please contact Audio System customer service directly or visit their official website. Contact information is typically available on the product packaging or the manufacturer's websit.

Manifakti: Sistèm Audio

Adrès manifakti: JRS Labs - The Art of Sound, Heinrich-Heine-Straße 13A, 63329 Rödermark