Klein Tools ET10 Magnetic Digital Pocket Thermometer User Manual

1. Enfòmasyon sou Sekirite

Read, understand, and follow all instructions, cautions, and warnings attached to and/or packed with all test and measurement devices before each use. This thermometer is PA intended for use on people or animals.

2. Pwodwi souview

The Klein Tools ET10 is a digital thermometer designed for taking ambient and direct-contact temperature readings. It supports both Fahrenheit (F) and Celsius (C) scales. Its rugged, portable design includes a magnet for easy attachment to air vents, making it ideal for HVAC field service. The protective sheath also functions as a handle to extend reach.

Karakteristik kle:

• Magnet inside base of probe for easy attachment to vents.
• Wide measurement range: -40 to 572-degrees F (-40 to 300-degrees C).
• User-selectable Fahrenheit and Celsius temperature measurements.
• Ekspozisyon retroeklere pou fasil viewing nan kondisyon limyè ki ba.
• Auto-power off after 15 minutes to conserve battery life.
• Max/Min, Hold, and Average functions.
• Stainless steel probe is FDA GRAS compliant.

Figure 2.1: The Klein Tools ET10 thermometer with its probe retracted into the protective sheath, showing the digital display.

Figure 2.2: An illustration of the ET10 thermometer, emphasizing its temperature range, backlit LCD, MAX/MIN/AVG functions, pocket clip, and magnetic feature.

Figure 2.3: The ET10 thermometer demonstrating its magnetic attachment capability on an air vent, allowing for hands-free temperature monitoring.

Figure 2.4: The thermometer's probe extended and inserted into a duct, illustrating its use for measuring internal air temperatures.

Figure 2.5: The ET10 thermometer with its probe submerged in liquid, displaying a temperature reading, showcasing adaptabilite li.

Figure 2.6: The ET10 thermometer with its stainless steel probe fully extended, ready for direct contact measurements.

Videyo pwodwi ofisyèl yo:

Pa gen okenn videyo pwodwi ofisyèl nan men vandè a ki te disponib pou entegre kounye a.

3. Enstalasyon

3.1 Enstalasyon batri

The Klein Tools ET10 thermometer requires 2 LR44 batteries, which are included with the product. To install or replace batteries:

1. Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
2. Use a small screwdriver or coin to open the compartment.
3. Insert the 2 LR44 batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Ranplase kouvèti lòj batri a epi an sekirite li.

3.2 Premye pouvwa sou

After battery installation, press the power button (usually marked with a power symbol or 'ON/OFF') to turn on the device. The display should illuminate, indicating it is ready for use.

4. Operasyon Enstriksyon

4.1 Power On/Off

• Pou limen: Peze bouton an POUVWA bouton.
• Pou etenn: Peze epi kenbe bouton an POUVWA button for a few seconds, or allow the device to auto-power off after 15 minutes of inactivity.

4.2 Mezi Tanperati

The ET10 can measure both ambient and direct-contact temperatures.

1. For Ambient Temperature: Simply turn on the device. The display will show the current ambient temperature.
2. For Direct-Contact Temperature: Carefully extend the stainless steel probe from its protective sheath. Insert the probe into the substance or area you wish to measure. Allow a few seconds for the reading to stabilize on the display.

4.3 Unit Selection (Fahrenheit/Celsius)

Pou chanje ant Fahrenheit (°F) ak Celsius (°C):

• Peze a °F/°C button. The display will toggle between the two units.

4.4 Max/Min, Hold, and Average Functions

The ET10 includes advanced measurement functions:

• RETE: Peze a KENBE button to freeze the current temperature reading on the display. Press again to release and resume live readings.
• MAX/MIN/MOYÈN: Peze a MAX/MIN/MWAYEN button repeatedly to cycle through the maximum recorded temperature, minimum recorded temperature, and average temperature since the device was powered on or the function was reset.

4.5 ekleraj

The display features a backlight for improved visibility in low-light conditions. The backlight typically activates automatically when the device is turned on or a button is pressed, and may turn off after a short period of inactivity to conserve battery.

4.6 Atachman mayetik

The thermometer has a magnet integrated into the base of its probe sheath. This allows it to be conveniently attached to metallic surfaces, such as HVAC vents, for hands-free monitoring.

5. Antretyen

5.1 Netwayaj

Pou netwaye tèmomèt la:

• Siye aparèy la pwòp ak anonsamp twal.
• Do not submerge the device in water or use abrasive cleaners.
• Ensure the probe is clean before and after each use, especially when measuring different substances.

5.2 Ranplasman batri

When the display indicates low battery or the device fails to power on, replace the LR44 batteries as described in Section 3.1.

5.3 Depo

When not in use, retract the probe fully into its protective sheath. Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures.

NAN. Depanaj

• No Display / Device Not Turning On:
  Check battery installation. Ensure batteries are inserted with correct polarity. Replace batteries if they are depleted.
• Lekti ki pa kòrèk:
  Ensure the probe is clean and making proper contact with the substance being measured. Allow sufficient time for the reading to stabilize. Verify the correct temperature unit (°F/°C) is selected.
• Display Flickering / Intermittent Operation:
  Sa ka vle di pil yo fèb. Ranplase pil yo.
• Probe Not Extending/Retracting Smoothly:
  Check for any debris obstructing the probe mechanism. Do not force the probe.

7. Espesifikasyon

8. Garanti ak sipò

For information regarding warranty coverage, technical support, or service for your Klein Tools ET10 thermometer, please visit the official Klein Tools websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha.

Ou ka jwenn plis enfòmasyon ak enfòmasyon pou kontakte yo sou Magazen KLEIN TOOLS sou Amazon.