Manyèl Itilizatè Robo Mop & Aspiratè ECOVACS OZMO 601 la

Entwodiksyon

The ECOVACS OZMO 601 is a self-charging robotic cleaner designed to vacuum and mop various floor types, including carpets and hard floors. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

Image: The ECOVACS OZMO 601 Robot Mop and Vacuum, shown with its accompanying smartphone application for remote control.

Kontni pake

Ensure all components are present before beginning setup:

• ECOVACS OZMO 601 Robot Mop & Vacuum
• Chaje waf
• Adaptè pouvwa
• Bwòs bò (2 pè)
• Main bwòs
• Pousyè Bin
• Tank dlo ak pad pou pase mop
• High Efficiency Filter (with sponge)
• Zouti netwayaj
• Manyèl Enstriksyon

Enstalasyon

1. Debake: Carefully remove all packaging materials and protective films from the robot and its accessories.
2. Enstale bwòs bò yo: Press the side brushes onto the posts at the bottom of the robot until they click into place.
3. Mete Dock Chaje a: Position the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3.3 feet) to the sides and 2 meters (6.6 feet) in front. Connect the power adapter to the dock and plug it into a wall outlet.
4. Inisyal chaj: Place the robot onto the charging dock. Ensure the charging pins on the robot align with those on the dock. The indicator light on the robot will show charging status. Allow for a full charge before first use (approximately 4-5 hours).
5. Telechaje aplikasyon ECOVACS HOME la: For smart control features, download the "ECOVACS HOME" app from your smartphone's app store. Follow the in-app instructions to connect your OZMO 601 to your home Wi-Fi network.

Image: The ECOVACS HOME app on a smartphone, illustrating its various control and monitoring functions for the robot cleaner.

Enstriksyon Operasyon

Kòmanse yon sik netwayaj

• Mòd oto: Press the Auto Mode button on the robot or in the app. The robot will automatically clean in a systematic pattern.
• Mòd Spot: For concentrated cleaning of a small area, place the robot near the area and select Spot Mode via the app.
• Mòd Edge: To clean along walls and furniture, select Edge Mode via the app.

Fonksyon aspirasyon

The OZMO 601 is equipped with a main brush and side brushes to effectively sweep and vacuum dirt, dust, and pet hair from various floor surfaces. Ensure the dust bin is properly installed before vacuuming.

Image: The underside of the ECOVACS OZMO 601, highlighting its main brush, side brushes, and the attached mopping pad for dual cleaning functionality.

Mopping Function (OZMO Mopping)

For mopping, fill the water tank with clean water and attach the mopping pad. Insert the water tank assembly into the robot. The OZMO 601 will then vacuum and mop simultaneously on hard floors. Remove the water tank and mopping pad when cleaning carpets.

Image: The ECOVACS OZMO 601 actively mopping a hard floor, demonstrating its water tank and cleaning action.

Navigasyon ak Capteur

The robot uses intelligent navigation to cover your floors efficiently. It is equipped with:

• Deteksyon obstak: Sensors help the robot detect and avoid obstacles, preventing collisions with furniture and walls.
• Capteur Anti-Gout: These sensors prevent the robot from falling down stairs or off ledges.

Image: The ECOVACS OZMO 601 illustrating its obstacle detection capabilities, navigating around furniture.

Image: The ECOVACS OZMO 601 demonstrating its anti-drop sensors, preventing it from falling down a staircase.

Antretyen

Regular maintenance is crucial for the optimal performance of your ECOVACS OZMO 601. Perform these steps regularly:

• Vide Bin Pousyè: Empty the dust bin after each cleaning cycle.
• Netwaye Filtè: Tap the high-efficiency filter to remove dust. Replace filters every 3-6 months, or as needed.
• Netwaye bwòs prensipal la: Use the cleaning tool to remove hair and debris from the main brush. Replace every 6-12 months.
• Bwòs bò pwòp yo: Remove tangled hair and debris from the side brushes. Replace every 3-6 months.
• Clean Water Tank and Mopping Pad: After mopping, empty any remaining water from the tank and wash the mopping pad. Allow to air dry.
• Netwaye Detèktè: Wipe the anti-drop sensors and obstacle detection sensors with a dry cloth to ensure proper function.

Depanaj

If you encounter issues with your ECOVACS OZMO 601, refer to the following common solutions:

• Robo a pa chaje: Ensure the charging dock is powered on and the robot is correctly aligned with the charging pins. Clean the charging contacts on both the robot and the dock.
• Robo a bloke souvan: Clear obstacles, loose cables, and thick rugs from the cleaning path. The robot may struggle with high thresholds or floor patterns that confuse its sensors.
• Pèfòmans netwayaj pòv: Empty the dust bin, clean or replace filters, and remove tangled hair from brushes. Ensure the water tank is filled for mopping.
• Pwoblèm koneksyon aplikasyon an: Ensure your robot is within Wi-Fi range and your router is functioning correctly. Try restarting both the robot and your Wi-Fi router. If issues persist, a full reset of the unit and re-pairing with the app may be necessary.
• Robot not returning to charging base: Ensure the charging dock is accessible and not blocked. The robot may have run out of battery far from the dock if cleaning a very large area.

Espesifikasyon

Garanti ak sipò

Pou enfòmasyon sou garanti, sipò teknik, oswa demann sèvis, tanpri al gade paj ofisyèl ECOVACS la. websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.

You can visit the official ECOVACS Store for more information: Magazen ECOVACS sou Amazon.