Manyèl Itilizatè Pwojè Sous Limyè Enstale 11 Pous la

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Enfòmasyon sou Sekirite

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC).
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• Pa enstale aparèy sa a nan kote ki mouye oswa ki pa klere.amp kote yo ye.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Pa depase wat maksimòm lantage espesifye pou aparèy sa a.
• Manyen konpozan an vè yo avèk prekosyon pou evite yo kraze.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Manyèl Enstriksyon (dokiman sa a)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Enstalasyon ak Enstalasyon

Zouti obligatwa (pa enkli):

• Phillips tèt tournevis
• Fil retire rad sou ou
• Tep elektrik (opsyonèl)
• Linèt sekirite

Etap enstalasyon:

1. Etenn pouvwa: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
2. Retire ansyen enstalasyon an (si sa aplikab): Retire tout aparèy limyè ki egziste deja avèk prekosyon, epi note koneksyon fil elektrik yo.
3. Prepare fil elektrik yo: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Konekte fil yo:
   • Konekte a nwa fil soti nan aparèy la rive nan la nwa (hot) wire from the ceiling box using a wire nut.
   • Konekte a blan fil soti nan aparèy la rive nan la blan (neutral) wire from the ceiling box using a wire nut.
   • Konekte a green or bare copper ground wire from the fixture to the green or bare copper ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Mount Fixture: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Enstale difizè an vè a: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Retabli pouvwa: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Enstriksyon Operasyon

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Antretyen

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• Netwayaj: Anvan ou netwaye, asire w ke kouran aparèy la koupe nan disjonktè a. Sèvi ak yon twal mou, sèk, oswa yon ti kras mouye.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Swen vè: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Pa gen ranplasman anpoul: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Depanaj

If your light fixture is not functioning as expected, consult the following common issues and solutions:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, kontakte yon elektrisyen kalifye oswa sèvis kliyan.

Espesifikasyon

Garanti ak sipò

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.