Aerocool Cylon RGB Midi-Tower PC Case - ACCM-PV10012.11 User Manual

1. Plis paseview

The Aerocool Cylon RGB Midi-Tower PC Case, model ACCM-PV10012.11, is designed to house computer components, offering both functionality and aesthetic appeal. It features a side window panel for showcasing internal hardware and an RGB LED illumination strip on the front panel for customizable lighting effects. This case supports ATX motherboards and provides ample space for various components, including multiple storage drives and cooling solutions.

Figi 1: Devan view of the Aerocool Cylon RGB Midi-Tower PC Case, highlighting its distinctive RGB LED strip.

2. Pake kontni

Tanpri verifye ke tout atik yo prezan nan pakè a:

• Aerocool Cylon RGB Midi-Tower PC Case (ACCM-PV10012.11)
• Accessory box (containing screws, standoffs, cable ties, etc.)
• Manyèl Itilizatè (dokiman sa a)

3. Enfòmasyon sou Sekirite

Read and understand all safety instructions before installing or operating the PC case. Failure to do so may result in injury or damage to the product.

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
• Manyen tout konpozan yo avèk prekosyon pou evite domaj.
• Avoid touching electronic components directly; use anti-static precautions if possible.
• Kenbe ti pyès ak akseswa yo lwen timoun yo.
• Ensure proper ventilation around the case to prevent overheating.

4. Enstalasyon ak Enstalasyon

4.1 Prepare Ka a

Before installing components, remove the side panels to access the interior of the case.

1. Mete bwat la sou yon sifas plat epi ki estab.
2. Locate the thumbscrews on the rear of the case securing the side panel.
3. Unscrew the thumbscrews and carefully slide the side panel backward, then lift it off. Repeat for the other side panel if necessary.

Figure 2: Left image shows the side panel attached, right image shows the side panel removed for access.

4.2 Enstalasyon mèr

The Aerocool Cylon case supports ATX motherboards.

1. Enstale pwoteksyon E/S ki te vini ak kat manman an nan ouvèti ki nan dèyè bwat la.
2. Ensure motherboard standoffs are correctly aligned with your motherboard's screw holes. Install any missing standoffs from the accessory box.
3. Mete kat manman ou a ak anpil atansyon sou distans yo, aliyen twou vis yo.
4. Secure the motherboard with the appropriate screws from the accessory box.

4.3 Drive Installation (2.5" / 3.5")

The case provides bays for 2.5-inch and 3.5-inch drives.

1. Locate the drive bays within the case. Refer to the case diagram for specific locations.
2. For 3.5-inch HDDs, slide the drive into the designated tray or bay and secure it with screws.
3. For 2.5-inch SSDs, mount the drive onto the designated bracket or tray and secure it with screws.

4.4 Enstalasyon Power Supply Unit (PSU).

The PSU is typically mounted at the bottom rear of the case.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the PSU's screw holes with those on the case.
3. Secure the PSU with the provided screws.

4.5 Expansion Card (GPU) Installation

Install your graphics card or other expansion cards into the PCIe slots.

1. Remove the necessary PCI-E slot covers from the rear of the case corresponding to your expansion card's size.
2. Carefully insert the expansion card into the appropriate PCI-E slot on the motherboard until it clicks into place.
3. Secure the expansion card with screws.

Figi 3: Dèyè view of the PC case, showing the expansion slots and I/O area.

4.6 Fan / Liquid Cooling Radiator Installation

The Aerocool Cylon case supports various cooling configurations.

• Dèyè: 1 x 120mm fan (pre-installed or optional).
• Top: Supports 2 x 120mm fans or 1 x 240mm radiator.
• Anba: Sipòte 2 fanatik 120mm.

1. Mount fans or radiators to their respective positions using the appropriate screws.
2. Connect fan power cables to the motherboard or a fan controller.

Figure 4: An interior shot of the case, illustrating potential fan and liquid cooling radiator placements.

4.7 Jesyon kab

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and behind the motherboard tray.
• Use cable ties (included in the accessory box) to bundle and secure cables.

4.8 Konekte Antre/Sòti Panèl Devan an

Connect the front panel cables to the corresponding headers on your motherboard.

• USB 3.0: Konekte kab USB 3.0 la nan pò USB 3.0 kat manman an.
• USB 2.0: Connect the USB 2.0 cables (x2) to the motherboard's USB 2.0 headers.
• Odyo HD: Konekte kab odyo HD a nan konektè odyo kat manman an.
• Pouvwa/Reyajiste/LED: Connect the small individual cables (Power SW, Reset SW, HDD LED, Power LED) to the motherboard's front panel headers according to your motherboard manual.

5. Itilizasyon bwat òdinatè a

Once all components are installed and connected, reattach the side panels and power on your system.

• Pouvwa sou: Press the power button located on the top I/O panel of the case.
• Kontwòl ekleraj RGB: The front panel RGB LED illumination can be controlled via a dedicated button on the top I/O panel or through compatible motherboard software, depending on your setup. Refer to your motherboard manual for software control options.

6. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite bwat ak konpozan PC ou a.

• Netwayaj Filtè Pousyè: The case features dust filters (e.g., on the top and bottom). Regularly remove and clean these filters to prevent dust buildup and maintain good airflow. Use compressed air or a soft brush.
• Netwayaj jeneral: Sèvi ak yon mou, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the transparent side panel, use a microfiber cloth to prevent scratches.

NAN. Depanaj

Si ou rankontre pwoblèm, konsidere etap depanaj komen sa yo:

• Pa gen pouvwa: Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position. Verify all power cables to the motherboard and components are securely seated.
• Vantilatè yo pa vire: Check that all fan cables are correctly connected to the motherboard or fan controller. Ensure the system is receiving power.
• RGB Not Working: Confirm RGB cables are properly connected. If using motherboard software, ensure it is installed and configured correctly.
• Koneksyon ki lach: Recheck all internal connections (power, data, front panel I/O) to ensure they are firmly seated.

8. Espesifikasyon

9. Enfòmasyon sou Garanti

The Aerocool Cylon RGB Midi-Tower PC Case is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official AeroCool websit la pou wè kondisyon detaye sou garanti a, tankou peryòd pwoteksyon an ak pwosedi pou fè reklamasyon yo.

10. Sipò

For further assistance, technical support, or to download the latest drivers and software, please visit the official AeroCool websit:

Websit: www.aerocool.io

You may also contact AeroCool customer service through the contact information provided on their websit.