Entwodiksyon
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Enfòmasyon sou Sekirite
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- AVÈTISMAN: Risk chòk elektrik. Dekonekte kouran nan fuze oswa disjoncteur anvan enstale oswa fè sèvis.
- AVÈTISMAN: Risk dife. Sèvi ak li sèlman nan sikui ki kalifye pou aparèy la.
- Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
- Pa modifye aparèy la nan okenn fason. Nenpòt modifikasyon ka anile garanti a epi kreye yon danje pou sekirite.
- Asire w ke tout koneksyon an sekirite epi byen izole.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Ki sa ki nan bwat la
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Mounting Materyèl
- Remote Kontwòl (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Enstalasyon (Konfigirasyon)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Etenn pouvwa: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tèsteur.
- Prepare Sifas Montage: Asire w bwat elektrik la byen monte epi li kapab sipòte pwa aparèy la.
- Konekte fil yo: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Mount Fixture: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Retabli pouvwa: Yon fwa aparèy la byen enstale, retabli kouran an nan disjonktè a.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Enstriksyon Operasyon
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Limen/Etenyen: Vire switch miray ki konekte ak aparèy la pou limen oswa etenn limyè a.
- Efikasite enèji: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Antretyen
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Netwayaj: Asire w ou koupe kouran an anvan ou netwaye. Sèvi ak yon twal mou, sèk oswa yon ti kras mouye.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Lonjevite LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Depanaj
Si ou rankontre pwoblèm ak aparèy ekleraj ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Pa gen kouran nan aparèy la; fil elektrik ki lach; switch ki gen pwoblèm. | Tcheke disjonktè a. Asire w tout koneksyon fil yo byen fèm. Teste switch miray la. |
| Limyè flickers. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Limyè ki soti a fèb oswa li pa konsistan. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Aparèy la fè yon bri ronronman. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Espesifikasyon
- Nimewo Modèl: CLL56-2WW
- Dimansyon pwodwi: 7.4 x 7.4 x 1.4 pous
- Pwa: 2.15 Pounds (per pack, total for 2 lights)
- Mak: Sous Pwojè
- Koulè: Blan
- Fòm aparèy limyè: Plafon (Montaj anrasan)
- Itilizasyon anndan/deyò: Andedan/Deyò (Rezistans pou imidite)
- Sous pouvwa: Fil elektrik ak fil (fil dirèk)
- Sòti limyè: 730 Lumen
- Tanperati koulè: 3000K
- Endèks rann koulè (CRI): 90
- Evalyasyon enèji: Enèji Star
Garanti ak sipò
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source websit.
