DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Entwodiksyon

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Enfòmasyon sou Sekirite

Always observe the following safety precautions when installing and operating your loudspeaker:

• Dekonekte tèminal negatif batri machin nan anvan ou kòmanse nenpòt travay elektrik pou anpeche kous kout.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amplifyè, oubyen sistèm elektrik machin nan.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Do not operate the audio system at excessively high volumes for prolonged periods, as this can cause hearing damage.
• Konsilte yon enstalatè pwofesyonèl si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an.

3. Ki sa ki nan bwat la

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Manyèl Enstriksyon

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Espesifikasyon

Imaj: Devan view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Enstalasyon ak Enstalasyon

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Planifikasyon Enstalasyon an

• Kote: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Fil elektrik: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpMatche ak lifier: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Monte Oratè a

Imaj: Side profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Prepare Sifas Montage: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Pozisyon Oratè: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Oratè an sekirite: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Koneksyon fil elektrik

Imaj: Dèyè view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Idantifye tèminal yo: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Konekte fil yo: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Koneksyon an sekirite: Asire w tout koneksyon yo sere epi pa gen kous sikwi.

6. Operasyon Enstriksyon

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Entegrasyon sistèm: Connect the PRO-GM6 to an appropriate ampchanèl lifier.
• Anviwònman kwazman: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Ajisteman genyen: Mete la amplifier gain correctly to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Peryòd enskripsyon: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Antretyen

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Netwayaj: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Enspeksyon: Tcheke koneksyon oratè yo detanzantan pou wè si yo sere epi asire w pa gen fil ki chire oswa ekspoze.
• Pwoteksyon anviwònman: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

NAN. Depanaj

9. Garanti ak sipò

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Ou ka jwenn plis enfòmasyon ak enfòmasyon pou kontakte yo sou DS18 Official Store on Amazon.