Entwodiksyon
This manual provides essential information for the safe and efficient operation of your RCF ART 710A active 2-way speaker. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Figi 1: Devan view of the RCF ART 710A active speaker, showcasing its robust grille and RCF logo.
Enfòmasyon enpòtan sou sekirite
- Pwovizyon pou pouvwa: Asire ekipman pou pouvwa a voltage matches the requirements specified on the unit. Use only the provided power cord.
- Vantilasyon: Pa bloke ouvèti vantilasyon yo. Asire w ke gen ase lè k ap sikile toutotou aparèy la pou anpeche l chofe twòp.
- Imidite: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the speaker.
- Plasman: Place the speaker on a stable, level surface or mount it securely using appropriate hardware.
- Sèvis: Konfye tout sèvis bay pèsonèl sèvis kalifye. Pa eseye louvri oswa repare aparèy la tèt ou.
- Pwoteksyon pou tande: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use hearing protection when operating at high volumes.
Karakteristik kle
- 1400W Peak Power, 700W RMS
- 10-inch Woofer, 1-inch Compression Driver
- FiRPHASE Technology for linear response
- Integrated DSP with equalization, phase control, soft limiting, crossover, and speaker protections
- Klas D Amplifikatè
- Frequency Response: 50 Hz - 20 kHz
- Maksimòm SPL: 129 dB
Enstalasyon
1. Debake
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
2. Plasman ak aliye
The ART 710A can be used as a main front-of-house speaker, a stage monitor, or mounted on a pole. Ensure the speaker is placed on a stable surface or securely mounted.
- Pòl Mounting: Use a standard 35mm speaker pole. Ensure the pole is rated to support the speaker's weight (approximately 37 lbs / 16.8 kg).
- Plasman etaj: Pou stage monitor applications, position the speaker at the desired angle.
- Sispansyon: If suspending the speaker, consult a qualified professional and use appropriate rigging hardware.
Figi 2: Top view of the RCF ART 710A, highlighting the integrated pole mount socket for stand placement.
3. Koneksyon
Refer to the rear panel for all input and output connections.
Figure 3: Rear panel of the RCF ART 710A, displaying XLR inputs, output, volume control, and power connection.
- Antre odyo: Connect your audio source (mixer, instrument, etc.) to the ENTRE EKILISE lè l sèvi avèk yon kab XLR.
- Audio Output (Link): Sèvi ak la Sòti ekilibre to link to another speaker or audio device.
- Antre pouvwa: Connect the provided power cord to the AC INPUT priz.
- Chanjman Sansiblite Antre: Adjust for microphone or line-level signals.
- Kontwòl Volim: Adjust the overall output level of the speaker.
Enstriksyon Operasyon
1. Powering On / Off
- Ensure all connections are secure and the volume control is set to minimum before powering on.
- Vire a SWITCH POUVWA to the "ON" position. The power indicator LED will illuminate.
- To power off, set the volume to minimum, then flip the SWITCH POUVWA sou "OFF".
2. Adjusting Volume and Input Sensitivity
- Kòmanse ak la VOLIM control at its minimum setting.
- Mete la ANPUTT SENSIBILITE switch according to your source: "MIC" for microphone level signals, "LINE" for line level signals (e.g., mixer output).
- Piti piti ogmante a VOLIM control to the desired listening level. Monitor the signal LEDs to avoid clipping (distortion).
3. DSP Functions (Internal Processing)
The ART 710A features an integrated Digital Signal Processor (DSP) that manages equalization, phase control, soft limiting, crossover, and speaker protections automatically. There are no user-adjustable DSP parameters directly on the unit. The system is optimized for a linear response and balanced sound.
Antretyen
- Netwayaj: Clean the speaker cabinet with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Grille: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
- Depo: When not in use for extended periods, store the speaker in a dry, temperate environment, ideally in its original packaging or a protective cover.
- Enspeksyon: Regularly inspect power cables and audio cables for any signs of wear or damage. Replace damaged cables immediately.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pwodiksyon son |
|
|
| Son defòme |
|
|
| Hum oswa bri |
|
|
Espesifikasyon teknik
| Karakteristik | Detay |
|---|---|
| Modèl | RCF ART 710A |
| Kalite Oratè | Active 2-way Speaker |
| Sorti pouvwa | 1400W pik, 700W RMS |
| Woofer | 10-pous |
| Chofè konpresyon | 1-pous |
| Repons Frekans | 50 Hz - 20 kHz |
| Max SPL | 129 dB |
| Karakteristik DSP | FiRPHASE Technology, EQ, Phase Control, Soft Limiting, Crossover, Protections |
| AmpKalite lifier | Klas D |
| Konektè Antre | XLR |
| Sòti rakor | XLR |
| Dimansyon (H x W x P) | 22.3 x 15.4 x 13.9 pous (56.6 x 39.1 x 35.3 cm) |
| Pwa | 37 liv (16.8 kg) |
| Sous pouvwa | Fil elektrik |
Enfòmasyon sou Garanti
RCF products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official RCF website or your local distributor for detailed warranty information and registration procedures. Keep your proof of purchase for warranty claims.
Sipò pou Kliyan
For technical assistance, service, or spare parts, please contact RCF customer support or your authorized RCF dealer. You can find contact information on the official RCF websit:
When contacting support, please have your product model (ART 710A) and serial number ready. The serial number is located on the rear panel of the speaker.
