VILTROX JY-710-C1 Wireless LCD Interval Timer Remote Control Instruction Manual

Entwodiksyon

The VILTROX JY-710-C1 is a versatile wireless LCD interval timer and shutter release remote control designed for various Canon cameras. This device enables precise control over camera shutter functions, including single shot, continuous shooting, Bulb mode, customized delay, and timed interval shooting. It is particularly useful for specialized photography such as capturing starry skies, night views, or time-lapse sequences. The remote features low power consumption and a clear LCD display for monitoring settings and timer plans.

Image: The VILTROX JY-710-C1 wireless remote control and its receiver unit.

Karakteristik pwodwi

• Operasyon san fil: Provides flexibility and reduces camera shake.
• Multi-functional Timer: Supports Delay/Self Timer, Interval Timer, Bulb/Long Exposure, and Exposure Count modes.
• Ekspozisyon LCD: Clear screen for easy setting and monitoring of timer parameters.
• Konsomasyon pouvwa ki ba: Designed for extended use.
• Lage Panno: Functions as a standard wired or wireless shutter release.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

• Timer Remote Control x1
• Reseptè x1
• Shutter Release Cable x1
• English Instruction Manual x1

Konpatibilite

The VILTROX JY-710-C1 is compatible with the following Canon EOS camera models:

• EOS 80D, 77D, 70D, 60D, 60Da
• EOS 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D
• EOS 200D, 100D, 1300D, 1200D, 1100D, 1000D
• EOS M5, M6

Enstalasyon

1. Enstalasyon batri

The remote control and receiver require batteries (not included). Open the battery compartment on the back of both units and insert the specified battery type, ensuring correct polarity. Close the compartments securely.

2. Connecting the Receiver to the Camera

1. Locate the remote control terminal on your camera. This is typically a small port on the side of the camera body.
2. Connect one end of the provided shutter release cable to the receiver unit.
3. Connect the other end of the shutter release cable to your camera's remote control terminal.
4. The receiver can be mounted on the camera's hot shoe or placed nearby.

Image: Demonstrates connecting the receiver unit to the camera's remote port.

3. Pairing and Channel Setting

Ensure both the remote control and receiver are powered on. If necessary, set both units to the same channel to establish a wireless connection. Refer to the specific instructions on the device's LCD for channel selection, usually involving a 'CH' setting.

Image: The remote control being used while connected to a camera on a tripod.

Enstriksyon Operasyon

Kontwòl Jeneral

• SET bouton: Used to confirm selections and enter settings menus.
• Bouton direksyon: Navige nan opsyon meni yo epi ajiste valè yo.
• LOCK bouton: Anpeche chanjman aksidantèl nan paramèt yo.
• Bouton DEMARAJ/ARETE MINITÈ: Initiates or halts the timer sequence.
• Bouton Deklancheman: Functions as a standard two-stage shutter button (half-press for focus, full-press for shutter).

Delay / Self Timer (DELAY)

This function operates similarly to your camera's self-timer. You can set a delay period in 1-second increments, up to a maximum of 99 hours, 99 minutes, and 99 seconds. After the delay, the shutter will be released.

Interval Timer (INTVL)

The Interval Timer allows you to set a specific time period between exposures, up to 100 hours. For example, if set to 10 minutes, an exposure will be taken every 10 minutes until the set exposure count is reached or manually stopped. This is ideal for time-lapse photography.

BULB / Long Exposure (LONG)

This mode enables long exposures, allowing the shutter to remain open for an extended duration, up to 100 hours. This is essential for low-light photography or capturing light trails.

Exposure Count (N)

The Exposure Count setting allows you to specify the total number of exposures to be taken in a sequence, up to 399 times. For instance, if set to 30, the device will trigger the shutter 30 times according to the other timer settings.

Antretyen

• Keep the device clean and dry. Use a soft, dry cloth to wipe surfaces.
• Evite ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa limyè solèy la dirèk.
• Retire pil yo si ou pa pral itilize aparèy la pou yon peryòd tan pwolonje pou anpeche flit.
• Do not attempt to disassemble or repair the unit yourself, as this may void the warranty and cause damage.

Depanaj

• Aparèy pa soumen: Tcheke enstalasyon pil yo epi asire w pil yo fre.
• Telekòmand lan pa deklanche kamera a:
  • Ensure the receiver is correctly connected to the camera's remote port.
  • Verify that both the remote and receiver are set to the same channel.
  • Check camera settings to ensure it is ready to accept remote triggers.
  • Confirm batteries in both units are charged.
• Timer functions not working as expected: Double-check all timer settings (DELAY, INTVL, LONG, N) on the LCD display. Ensure the TIMER START/STOP button has been pressed.

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please refer to the documentation included with your purchase or contact VILTROX customer service directly. Keep your proof of purchase for any warranty claims.