ECHOGEAR MaxMotion TV Wall Mount EGLF2 Instruction Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR MaxMotion Full Motion TV Wall Mount, model EGLF2. This mount is designed to securely hold televisions ranging from 42 to 90 inches and weighing up to 125 lbs. Please read all instructions carefully before beginning installation.

Imaj: Devan view of the ECHOGEAR MaxMotion TV Wall Mount EGLF2, showcasing konsepsyon solid li yo ak bra atikile li yo.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact ECHOGEAR customer support.

• Do not install this product on walls that are not structurally sound.
• Ensure the mounting surface can support the combined weight of the mount and the television.
• Always use a stud finder to locate the center of wood studs.
• Drill pilot holes to the specified depth and diameter.
• Pa sere boulon vis.
• Pwodwi sa a fèt pou itilize andedan kay la sèlman.
• Kenbe timoun ak bèt kay lwen pandan enstalasyon an.

3. Pake kontni

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact ECHOGEAR customer support.

• Asanble Plak Miray la
• Parantèz televizyon (2)
• Twous pyès ki nan konpitè (divès vis, rondelle, espasè pou televizyon ak montaj miray)
• Modèl Forage
• Manyèl Enstriksyon

4. Zouti obligatwa

Yo rekòmande zouti sa yo pou yon enstalasyon ki reyisi:

• Stud Chèche
• Fè egzèsis
• Drill Bits (specific sizes for pilot holes, refer to drilling template)
• Nivo
• Phillips tèt tournevis
• Kle Socket (pou boulon lag)
• Kreyon
• Mezire tep

5. Enstalasyon ak Enstalasyon

5.1 Determine Wall Type and Location

This mount is compatible with 16"-24" wood studs, poured concrete, and concrete block walls. Pa enstale li sou miray sèk sèlman.

Image: Illustration of compatible wall types for installation, including wood studs, poured concrete, and concrete block.

5.2 Wall Plate Installation

1. Jwenn poto yo: Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at your desired TV height. For concrete walls, mark your desired mounting points.
2. Modèl Pozisyon: Tape the included drilling template to the wall, aligning it with your marked stud centers or concrete mounting points. Use a level to ensure it is perfectly horizontal.


Image: A person drilling pilot holes into a wall using the provided ECHOGEAR drilling template for accurate placement.

3. Fè twou pilòt: Drill pilot holes through the marked points on the template. Refer to the template for specific drill bit sizes and depths for your wall type.
4. Tache plak miray la: Align the wall plate with the drilled holes. Secure it to the wall using the provided lag bolts and washers. Tighten the lag bolts firmly, but do not overtighten.

5.3 TV Bracket Attachment

1. Identify VESA Pattern: Locate the mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes to determine your TV's VESA pattern. The EGLF2 mount supports various VESA patterns.
2. Chwazi Materyèl: Choose the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern and depth.
3. Tache parantèz: Secure the two TV brackets to the back of your television. Ensure the brackets are centered and level. Do not overtighten the screws.

5.4 Enstalasyon televizyon an

1. Lift TV: With assistance, carefully lift the television and hook the TV brackets onto the arms of the wall plate assembly.
2. Televizyon an sekirite: Once the TV is securely hooked, engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

6. Itilizasyon Mòn nan

The ECHOGEAR MaxMotion mount offers full adjustability for optimal viewing.

6.1 Ekstansyon ak Retrè

Gently pull the TV away from the wall to extend the mount up to 22 inches. Push the TV back towards the wall to retract it to a minimum distance of 2.4 inches from the wall.

Image: Visual representation of the mount's extension capability (up to 22 inches) and its slim profile when retracted (2.36 inches from the wall).

6.2 Ajisteman Pivote

The mount allows for up to 130 degrees of swivel (65 degrees left or right, depending on TV size and wall position). Gently pivot the TV to achieve your desired viewang ang.

Image: A television mounted on the ECHOGEAR MaxMotion mount, demonstrating its ability to swivel up to 130 degrees for flexible viewing.

6.3 Ajisteman enklinezon

The mount features tool-free tilt adjustment, allowing you to tilt your TV up or down by up to 15 degrees to reduce glare or optimize viewsoti nan diferan wotè.

Image: Close-up of the mount's mechanism, highlighting the tool-free tilt function that allows for up to 15 degrees of vertical adjustment.

7. Antretyen

Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan sipò televizyon ou an.

• Enspeksyon peryodik: Tcheke tout vis ak boulon yo detanzantan pou asire yo rete byen sere. Sere boulon yo ankò si sa nesesè.
• Netwayaj: Netwaye montaj la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
• Mouvman: Ensure the articulating arms move smoothly. If movement becomes stiff, check for obstructions or contact support.

NAN. Depanaj

Si ou rankontre pwoblèm pandan oswa apre enstalasyon an, gade pwoblèm ak solisyon komen sa yo:

• Televizyon an pa nivo: The mount includes a post-installation leveling feature. Gently rotate the TV to adjust its horizontal alignment.
• Mòn nan santi l lach: Recheck all wall plate lag bolts and TV bracket screws. Ensure they are tightened securely according to the instructions. Do not overtighten.
• Difikilte pou deplase televizyon an: Ensure no cables are snagged or obstructing movement. Check that the mount's arms are not binding.
• Pati ki manke: Do not proceed with installation. Contact ECHOGEAR customer support immediately for replacement parts.

9. Espesifikasyon

Image: Illustration highlighting the mount's capacity for TVs up to 90 inches and its heavy-gauge steel construction, capable of holding up to 125 lbs.

10. Garanti ak sipò

ECHOGEAR stands behind the quality of its products. For specific warranty details, please refer to the product packaging or the official ECHOGEAR websit.

If you require assistance with installation, troubleshooting, or have any questions about your ECHOGEAR MaxMotion TV Wall Mount, our Minnesota-based support team is available 7 days a week.

Kontakte sipò: Refer to the contact information provided on the ECHOGEAR websit oswa anbalaj pwodwi a.

Image: Graphic indicating ECHOGEAR's Minnesota design origin and availability of product support 7 days a week.