Manyèl Itilizatè Philips myLiving PONGEE LED Spot Light (Modèl 5058131PN)

1. Entwodiksyon

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo pou evite blesi oswa domaj:

• Sekirite elektrik: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Itilize andedan kay la sèlman: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Kalite anpoul: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage endike sou aparèy la.
• Manyen: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Netwayaj: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Materyèl pou monte (vis, ploge miray)
• Manyèl enstriksyon

Nòt: A GU10 LED bulb is pa enkli epi yo dwe achte separeman.

Figi 2: Anbalaj pwodwi a

4. Enstalasyon ak Enstalasyon

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Prepare Zòn Enstalasyon an: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Dekonekte pouvwa: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Monte baz la: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Fil aparèy la: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Enstale anpoul la: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Atache kò aparèy la: Secure the main body of the spot light to the mounted base.
7. Retabli pouvwa: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Operasyon Enstriksyon

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Limen/Etenyen: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Ajiste direksyon limyè: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Antretyen

• Netwayaj: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Ranplasman anpoul:
  1. Fèmen ekipman pou pouvwa a nan disjoncteurs a.
  2. Kite anpoul la refwadi nèt.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
  5. Retabli pouvwa.

NAN. Depanaj

8. Espesifikasyon

• Mak: Philips Lighting
• Nimewo Modèl: 5058131PN
• Dimansyon pwodwi (L x W x H): 10 x 13.8 x 8.2 cm
• Pwa atik: 345 gram
• Materyèl: Metal
• Koulè: Blan
• Style: Modèn
• Kalite sous limyè: dirije
• Bulb Socket Type: GU10
• Kantite anpoul: 1 (bulb not included)
• Antre Voltage: 220-240 vòlt
• Sous pouvwa: Electrical cable (wired)
• Kalite enstalasyon: Surface Mount (Ceiling/Wall)
• Evalyasyon IP: IP20 (itilizasyon andedan kay la sèlman)
• Karakteristik espesyal: Energy-efficient, Swivel head
• Itilizasyon espesifik: Home, Bedroom, Living Room

9. Garanti ak sipò

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websit la. Ou kapab kontakte revandè ou a tou pou jwenn asistans.

Kenbe prèv acha ou pou nenpòt reklamasyon garanti.