Entwodiksyon
This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.
Enfòmasyon sou Sekirite
AVÈTISMAN:
- Always follow the assembly instructions provided in this user manual to ensure safe use.
- Pa depase kapasite pwa maksimòm lan ki se 275 liv (124.74 kg).
- Be cautious of the swivel feature to prevent tripping.
- Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la:
- Kousen chèz
- Kousen tounen
- Gas Lift (Cylinder)
- Hardware (Screws, Hex Tool)
- Base (5-point star base)
- Akoudwa (2)
- Woulo (5)
- Mechanism (for seat height and tilt)
Enstalasyon ak Asanble
Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.
Video: AmazonBasics Mid-Back Office Chair Assembly Guide. This video demonstrates the step-by-step process of assembling the chair, including attaching the casters, cylinder, mechanism, seat, armrests, and backrest, and tightening all screws.
- Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
- Insert Cylinder: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
- Atache mekanis lan nan chèz la: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
- Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
- Tache akoudwar: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
- Tache Dosye: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
- Sere tout vis yo: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
- Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.
Enstriksyon Operasyon
Your Amazon Basics office chair offers several adjustable features for personalized comfort:
- Ajisteman wotè chèz: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
- Fonksyon enklinezon: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
- Ajisteman tansyon enklinezon: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
- Pivotasyon 360 degre: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
- Roulèt woulant: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.
Antretyen
Pou kenbe chèz ou a an bon eta epi kenbe l ap dire pi lontan:
- Netwayaj: Siye pwòp ak anonsamp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif ki ka domaje fo kwi a.
- Fastener: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
- Woulèt: Kenbe wou yo pwòp san debri (cheve, pousyè, elatriye) pou asire yo woule san pwoblèm.
Depanaj
If you encounter issues with your chair, consider the following:
- Chèz la santi l enstab oswa li pa ka fè anyen: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
- Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
- Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
- Rou yo pa woule byen: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.
Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Dimansyon pwodwi (L x W x H) | 24.2"D x 24"W x 38.8"H (61.5cmW × 61cmD × 88.5-98cmH) |
| Lajè chèz | 20.1 pous |
| Pwofondè chèz | 16.5 pous |
| Syèj Do Enteryè Wotè | 18.7 pous |
| Kapasite pwa | 275 liv (124.74 kg) |
| Materyèl | Faux Leather (Polyurethane bonded leather) |
| Ranpli Materyèl | Kim |
| Retounen Style | Solid Retounen |
| Sou entènèt jwèt Bra Style | Akoudwar Matlasye |
| Mouvman | 360-degree Swivel, Rolling Casters |
| Ajisteman | Height-adjustable seat, Adjustable seat angle, Tilt control |
| Sètifikasyon | BIFMA Certified |
| Nimewo Modèl | GF-9390M-1 |
| UPC | 841710177909 |
Garanti ak sipò
For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.
