Timex Men's Ironman Triathlon Rugged 30 Watch User Manual

1. Pwodwi souview

The Timex Ironman Triathlon Rugged 30 watch is designed for durability and functionality, offering essential features for active individuals. It combines a robust design with practical timekeeping and training tools.

Karakteristik kle yo enkli:

• Adjustable black 20mm resin strap, fitting up to an 8-inch wrist circumference.
• Kronograf 100 èdtan ak memwa 30 tou pou swiv pèfòmans.
• Yon revèy 24 èdtan pou konte a rebours pou plizyè aktivite.
• Three daily, weekday, or weekend alarms for reminders.
• 24-hour military time mode and two time zones for convenience.
• Ekspozisyon kalandriye jou, dat, ak mwa.
• Black 44mm resin case with an acrylic lens and black digital display.
• Kadran mont Indiglo ki limen pou vizibilite nan fènwa.
• Water resistance up to 100 meters (330 feet), suitable for swimming and snorkeling, but not diving.

Figi 1: Devan view of the Timex Ironman Triathlon Rugged 30 Watch.

2. Enstalasyon

2.1 Premye Konfigirasyon Dat ak Lè

To set the time and date on your Timex Ironman watch, locate the "SET" button, typically on the left side of the watch. Press and hold this button until the display begins to flash, indicating that it is in setting mode. Use the "MODE" or "START/SPLIT" buttons to cycle through the different settings (hours, minutes, seconds, month, day, year) and the "RESET" or "INDIGLO" buttons to adjust the values. Press "SET" again to confirm each setting and exit the setting mode.

2.2 Mete mont lan

Adjust the resin strap to ensure a comfortable and secure fit on your wrist. The strap is designed to fit wrist circumferences up to 8 inches. Ensure the watch is not too tight to allow for proper circulation, but snug enough to prevent excessive movement during activity.

Figure 2: The Timex Ironman Triathlon Rugged 30 Watch worn on a wrist.

3. Operasyon Enstriksyon

3.1 Kronograf (Kronomèt)

To access the chronograph mode, press the "MODE" button until "CHRONO" or a stopwatch icon appears on the display. Press "START/SPLIT" to begin timing. Press "START/SPLIT" again to record a lap time without stopping the main timer. Press "STOP" to pause the chronograph. Press "RESET" to clear the chronograph to zero. The watch features a 100-hour chronograph with 30-lap memory.

3.2 Countdown Timer

Navigate to the timer mode by pressing the "MODE" button. To set the countdown time, press and hold "SET" until the digits flash. Use "START/SPLIT" and "RESET" to adjust the hours, minutes, and seconds. Press "SET" to confirm. Press "START/SPLIT" to begin the countdown. An audible alarm will sound when the timer reaches zero.

3.3 Alam

The watch supports three independent alarms. Press "MODE" to cycle to the alarm setting. Use "SET" to select and adjust the alarm time. You can typically set alarms for daily, weekday, or weekend activation. Once set, ensure the alarm is activated (indicated by an alarm icon on the display). The alarm will sound at the set time.

3.4 Zòn Tan

Your watch can display time in two different time zones. Use the "MODE" button to switch between time zone displays. To set the second time zone, refer to the detailed instructions in the full user manual, typically involving the "SET" button in time mode.

3.5 Limyè lannwit Indiglo

To illuminate the watch dial in low-light conditions, press the "INDIGLO" button, usually located on the top right of the watch case. The light will remain on for a few seconds, providing clear visibility of the digital display.

4. Antretyen

4.1 Rezistans dlo

This watch is water resistant to 100 meters (330 feet). This rating means it is suitable for recreational swimming and snorkeling. It is pa recommended for scuba diving or high-impact water sports. Avoid pressing buttons underwater to prevent water ingress.

4.2 Ranplasman batri

The watch uses 1 Lithium Metal battery (included). When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

NAN. Depanaj

• Ekran an vid oswa li pa klere byen: Check battery level. If low, replace the battery. Ensure the watch is not exposed to extreme temperatures.
• Bouton yo pa reponn: Try a soft reset by pressing all buttons simultaneously for a few seconds (if applicable to your model, consult full manual). If issues persist, the watch may require servicing.
• Tan an pa egzak: Re-set the time and date as per Section 2.1. If the time continues to drift significantly, the internal mechanism may be faulty, or the battery is very low.
• Dlo anndan mont lan: If condensation or water droplets appear under the crystal, immediately take the watch to a qualified service center. Do not attempt to dry it yourself, as this can cause further damage.

6. Espesifikasyon

Figure 3: Product packaging for the Timex Ironman Triathlon Rugged 30 Watch.

7. Garanti ak sipò

Timex watches typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included with your purchase for specific terms and conditions, or visit the official Timex websit pou enfòmasyon detaye sou garanti.

Pou plis asistans, sipò teknik, oubyen pou view the complete user manual, please visit the official Timex support page or refer to the PDF manual available online:

Telechaje Manyèl Itilizatè Ofisyèl la (PDF)