Entwodiksyon
Thank you for choosing the DS18 PRO-X6.4BMSL Slim Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your new 6.5-inch midrange speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Enfòmasyon sou Sekirite
Toujou obsève prekosyon sekirite sa yo pandan enstalasyon ak operasyon:
- Dekonekte tèminal negatif batri machin nan anvan ou kòmanse nenpòt travay elektrik pou anpeche kous kout.
- Ensure all wiring is properly insulated and secured to prevent damage and electrical hazards.
- Do not mount speakers where they may obstruct vehicle operation or safety devices.
- Avoid prolonged exposure to very high volume levels, which can cause permanent hearing damage.
- Konsilte yon enstalatè pwofesyonèl si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an.
Kontni pake
Verifye ke pake ou a gen atik sa yo:
- DS18 PRO-X6.4BMSL Slim Loudspeaker (1 unit)
- Manyèl Itilizatè (dokiman sa a)
Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Non modèl | PRO-X6.4BMSL |
| Kalite Oratè | Midrange Loudspeaker |
| Gwosè Oratè | 6.5 pous |
| RMS Power Handling | 200 Watts |
| Maksimòm manyen pouvwa | 400 Watts |
| Enpedans | 4 Ohm |
| Repons Frekans | 80Hz - 5KHz |
| Bobin Vwa | 1.5" Kapton |
| Materyèl leman | Ferit |
| Pwa leman | 21 Oz |
| Pwofondè monte | 2.15 pous (54.5mm) |
| An jeneral dyamèt | 6.65 pous (169mm) |
| Front Mount Baffle Cut Out | 5.63 pous (143mm) |
| Materyèl panyen an | Steel with Red Gloss Finish |
| Pwa atik | 3.5 liv |
Gid enstalasyon
1. Pre-Enstalasyon
- Konpatibilite machin: Ensure the speaker size (6.5 inches) and mounting depth (2.15 inches) are compatible with your vehicle's intended installation location (e.g., door panels).
- Zouti obligatwa: Gather necessary tools including screwdrivers, wire strippers, crimping tool, drill, and appropriate mounting hardware (not included).
- Dekoneksyon pouvwa: Disconnect the negative terminal of your vehicle's battery before starting any wiring.
2. Mounting the Speaker
The PRO-X6.4BMSL features a slim design for easier integration into various builds.
- Retire oratè ki la a avèk prekosyon oubyen prepare kote pou monte l la.
- Ensure the mounting surface is flat and free of obstructions. The baffle cutout diameter required is 5.63 inches (143mm).
- Position the speaker in the opening. Align the mounting holes on the speaker frame with the pre-drilled holes or mark new ones.
- Secure the speaker using appropriate screws (not included). Do not overtighten to avoid damaging the speaker frame.
3. Koneksyon fil elektrik
The PRO-X6.4BMSL has a 4-ohm impedance. Ensure your amplifier is stable at this impedance and can provide sufficient power (200W RMS per speaker is recommended).
- Identify the positive (+) and negative (-) terminals on the speaker. The positive terminal is typically wider or marked.
- Connect the positive (+) wire from your amplifier to the speaker's positive (+) terminal.
- Connect the negative (-) wire from your amplifier to the speaker's negative (-) terminal.
- Ensure all connections are secure and free from short circuits. Use high-quality speaker wire of appropriate gauge.
Enstriksyon Operasyon
Once installed and wired correctly, follow these steps to operate your DS18 PRO-X6.4BMSL loudspeaker:
- Rekonekte batri: Rekonekte tèminal negatif batri machin ou an.
- Pouvwa sou: Turn on your car audio system and amplifier.
- Initial Volume Setting: Kòmanse ak la amplifier's gain and head unit's volume at their lowest settings.
- Ajiste Anviwònman: Ogmante volim nan piti piti epi ajiste amplifier's gain and crossover settings to achieve desired sound quality without distortion. The recommended frequency range for this midrange speaker is 80Hz to 5KHz.
- Listen for Distortion: If you hear any distortion, reduce the volume or gain immediately to prevent speaker damage.
Antretyen
Bon antretyen asire lonjevite ak pèfòmans oratè ou yo:
- Netwayaj: Use a soft, dry cloth to gently wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
- Enspeksyon: Periodically check wiring connections for tightness and signs of corrosion. Ensure the speaker is securely mounted.
- Pwoteksyon anviwònman: While robust, avoid exposing the speakers to extreme temperatures, direct sunlight for extended periods, or excessive moisture.
Depanaj
If you encounter issues with your DS18 PRO-X6.4BMSL loudspeaker, refer to the following common problems and solutions:
- Pa gen son:
- Tcheke tout koneksyon fil elektrik ki soti nan amplifier to the speaker for proper contact and polarity.
- Verifye ke amplifier limen epi li fonksyone kòrèkteman.
- Ensure the head unit is sending an audio signal to the amplifier.
- Son defòme:
- Reduce the volume level on your head unit and amplifier gain.
- Tcheke pou bon amplifier gain settings; too high gain can cause clipping.
- Ensure the speaker wires are not frayed or shorting out.
- Verifye ke amplifier's power output matches the speaker's RMS power handling.
- Weak or Uneven Sound:
- Check speaker polarity; incorrect wiring (e.g., one speaker wired out of phase) can cause cancellation.
- Enspekte kòn oratè yo pou nenpòt domaj fizik.
Garanti ak sipò
The DS18 PRO-X6.4BMSL Slim Loudspeaker comes with a Garanti limiteTanpri gade kat garanti ki vini ak acha ou a pou kondisyon espesifik yo.
Additionally, products purchased through authorized channels typically offer a Règleman pou retounen/ranplasman nan 30 jou from the date of purchase, subject to the retailer's terms.
For technical support, warranty claims, or further assistance, please contact DS18 customer service through their official websit oswa revandè kote yo te achte pwodwi a.
