Entwodiksyon
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
Kontni pake
Before beginning, please verify that all items listed below are present in your package:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
Enstalasyon
Follow these steps to set up your turntable for optimal performance:
- Debake: Retire tout konpozan yo nan anbalaj la avèk prekosyon. Kenbe anbalaj la pou transpò oswa depo pita.
- Plasman: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- Enstalasyon plato: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- Enstalasyon senti: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- Ajisteman Anti-patinaj: Attach the anti-skating weight to the designated groove on the tonearm support.
- Kouvèti pousyè: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- Koneksyon: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preamplifier oswa amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
Enstriksyon Operasyon
To play a record:
- Pouvwa sou: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- Chwazi vitès: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- Dosye Kote: Mete disk vinil ou a sou plato a avèk anpil atansyon.
- Leve bra a: Sèvi ak levye leve bra a pou leve bra a.
- Pozisyon Stylus: Deplase bra a dousman sou rainur ou vle kòmanse sou disk la.
- Bra anba: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- Fen Lekti a: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
Antretyen
Antretyen regilye asire lonjevite ak pèfòmans optimal platin ou a:
- Kouvèti pousyè: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Netwaye Stylus la: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Cleaning Records: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- Enspeksyon senti: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
Depanaj
Si ou rankontre pwoblèm ak platin ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| No power / Turntable not spinning | Power cable disconnected; Power outlet faulty; Power switch off. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| Pa gen son oswa son an trè ba | Antre ki pa kòrèk la chwazi sou amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preamplifier. | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| Son defòme / Son ki sote | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| Chanson bri | Fil tè a pa konekte; Entèferans ki soti nan lòt aparèy elektwonik. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non modèl | Essential III Sgt. Pepper |
| Mak | Pro-Ject |
| Dimansyon (L x W x H) | 12.99 x 16.54 x 4.41 pous |
| Pwa atik | 11 liv (apeprè 5 kg) |
| Koneksyon Teknoloji | RCA |
| Materyèl | Bwa Enjenyè, Plastik |
| Sistèm kondwi | Kondwi senti ak motè synchronous ak senti silikon |
| Plat | Acrylic (Acryl it E upgrade) |
| Tonbra | 8.6" Aluminium Tonearm |
| Katouch | Pre-mounted Ortofon OM10 |
| Sou-mòd konsomasyon pouvwa | 4.5 wat |
Garanti ak sipò
For warranty information and technical support, please refer to the official Pro-Ject Audio Systems websit la oubyen kontakte konsesyonè otorize ou a. Kenbe prèv acha ou a pou reklamasyon garanti.
Manifakti: Sistèm Audio Pro-Ject
Premye disponib: 31 me 2017
Règleman retounen: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
Pou plis asistans, vizite Pro-Ject Store on Amazon.
