Manyèl Itilizatè CURT 13337 Klas 3 Remorque Hitch

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your CURT 13337 Class 3 Trailer Hitch. This hitch is designed for select Lexus NX200t, NX300, and NX300h models, offering reliable towing capabilities for various trailer types.

The CURT Class 3 Trailer Hitch is engineered for serious towing, providing a vehicle-specific fit and the necessary weight capacity for utility trailers, boat trailers, campers, snowmobile or ATV haulers, and more. It features a 2-inch receiver tube and is constructed from rugged, high-strength steel with a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping, and UV damage.

Figure 1: CURT 13337 Class 3 Trailer Hitch, a robust towing solution.

2. Enfòmasyon sou Sekirite

WARNING: Read and understand all instructions before installation and use. Failure to follow these instructions could result in serious injury or property damage.

• Always ensure the hitch is properly installed and secured before towing.
• Never exceed the lowest-rated towing component (vehicle, hitch, or trailer).
• Regularly inspect the hitch for any signs of wear, damage, or corrosion. Replace damaged components immediately.
• Ensure all fasteners are tightened to the specified torque values.
• Sèvi ak ekipman sekirite ki apwopriye pandan enstalasyon an, tankou pwoteksyon pou je ak gan.
• Be aware of Proposition 65 warnings regarding potential chemical exposure.

3. Lis Pati

The CURT 13337 Class 3 Trailer Hitch package typically includes the following components:

• Atache remorque CURT Klas 3 (Modèl 13337)
• Mounting Hardware (bolts, washers, nuts as required for vehicle-specific fit)
• Enstriksyon Enstalasyon

Note: Specific hardware may vary. Refer to the included installation sheet for exact components.

4. Enstalasyon ak Enstalasyon

This section provides general guidance for installing your CURT Class 3 Trailer Hitch. For detailed, vehicle-specific instructions, always refer to the installation sheet provided with your product. Professional installation is recommended if you are not familiar with vehicle modifications.

4.1. Etap Pre-Enstalasyon yo

1. Pake machin nan sou yon sifas ki plat epi angaje fren pakin nan.
2. Allow the exhaust system to cool completely if the vehicle has been recently driven.
3. Gather all necessary tools (e.g., wrenches, sockets, torque wrench, safety glasses, gloves).
4. Locate the vehicle's frame mounting points. The hitch is designed for a custom, factory fit on select Lexus NX200t, NX300, and NX300h models.

4.2. Exhaust System Considerations

Depending on your specific Lexus NX model and year, it may be necessary to temporarily lower or remove sections of the exhaust system to gain access to the frame mounting points. For some models, particularly the NX300f, completely removing the rear section of the muffler (2 bolts and 3 hangers) may be easier than attempting to work around the exhaust tips or bumper components.

For hybrid models (e.g., NX300h), it might not be necessary to drop the exhaust at all, as it may allow enough movement with a small nudge.

4.3. Monte Atach la

1. Clean any debris or rust from the vehicle's frame weld nuts if present.
2. Carefully position the trailer hitch against the vehicle's frame rails, aligning the mounting holes on the hitch with the corresponding holes on the vehicle frame. This may require two people due to the weight and snug fit.
3. Insert the provided fasteners through the hitch and into the frame. Apply a small amount of anti-seize or lubricant to bolt threads.
4. Hand-tighten all bolts to ensure proper alignment before final tightening.
5. Once aligned, tighten all bolts to the torque specifications provided in your product's specific installation sheet. Ensure even tightening across all fasteners.
6. If the exhaust system was lowered or removed, re-install it securely.

Figure 2: The hitch features a standard 2-inch receiver tube.

Figure 3: Representative image highlighting key features such as vehicle-specific design, dual-coat finish, standard hitch receiver, and fully tested design.

Figi 4: Yon imaj detaye view of the 2-inch standard hitch receiver.

Figure 5: The hitch undergoes a dual-coat finishing process, combining liquid A-coat and black powder coat for enhanced durability and corrosion resistance.

Figure 6: Every CURT Class 3 trailer hitch design is rigorously tested in real-world, on-vehicle conditions at their engineering facility, adhering to SAE J684 standards for safety.

Figure 7: The CURT trailer hitch is proudly made in the USA.

Figure 8: This hitch is designed for a no-drill installation on compatible vehicles.

4.4. Videyo enstalasyon

5. Operasyon Enstriksyon

Once installed, your CURT Class 3 Trailer Hitch is ready for use. Follow these guidelines for safe operation:

• Konekte yon trelè: Insert the trailer ball mount into the 2-inch receiver tube and secure it with a hitch pin and clip. Ensure the pin is fully engaged.
• Chenn Sekirite: Always attach safety chains from the trailer to the designated chain loops on the hitch. Cross the chains under the trailer tongue to cradle it in case of detachment.
• Koneksyon elektrik: If your trailer requires electrical power (lights, brakes), connect the appropriate wiring harness to your vehicle's towing electrical system.
• Kapasite pwa: Adhere strictly to the hitch's weight capacities: 3,500 lbs. Gross Trailer Weight (GTW) and 525 lbs. Tongue Weight (TW). When using a weight distribution hitch, capacities are 4,000 lbs. WD and 525 lbs. WDTW. Never exceed the lowest-rated component in your towing setup.
• Driving with a Trailer: Drive cautiously, allowing for increased braking distances and wider turns. Be mindful of trailer sway and adjust driving habits accordingly.
• Bike Racks: Note that this hitch is not compatible with vertical hanging bikes/bike racks that require bikes to be hung/mounted vertically.

6. Antretyen

Proper maintenance will ensure the longevity and safe operation of your trailer hitch:

• Enspeksyon regilye: Before each towing trip, inspect the hitch for any signs of rust, cracks, bends, or other damage. Check all bolts for tightness.
• Netwayaj: Keep the hitch clean from dirt, salt, and road grime. Wash with mild soap and water, then rinse thoroughly.
• Pwoteksyon korozyon: The dual-coat finish provides excellent protection, but minor scratches should be touched up to prevent rust.
• Lubrifikasyon: Apply a light coat of grease to the inside of the receiver tube periodically to prevent rust and ease insertion of accessories.

NAN. Depanaj

8. Espesifikasyon

9. Garanti & Sipò

For specific warranty information regarding your CURT 13337 Class 3 Trailer Hitch, please refer to the documentation included with your product or visit the official CURT website. Warranty terms typically cover defects in material and workmanship.

For technical support, installation assistance, or to inquire about replacement parts, please contact CURT customer service directly. Contact information can usually be found on the product packaging or their official websit.

Resous sou entènèt:

• CURT ofisyèl Websit: www.curtmfg.com
• Magazen Amazon: CURT Amazon Store